Working on Stellantis/CDJR Vehicles: A Shop Guide to PTU Failures, Brake Line Corrosion, and Warranty Documentation
Stellantis (Jeep/Chrysler/Dodge/Ram) vehicles generate an outsized share of warranty comebacks, and techs are often the ones stuck translating vague recall bulletins into billable, defensible repairs. Here’s a shop-floor guide to the most common failure points, how to diagnose them correctly, and how to paper a job so reimbursement doesn’t stall for months.
Automotive-Inspired Cat Names: A Technician’s Guide to Naming Your Shop Cat
Finding a cat in your shop or garage calls for a name that fits the environment. This guide compiles automotive-inspired naming options from classic engine components to performance parts, helping technicians choose a fitting moniker for their new shop companion.
Curb-Damaged Tire: How to Inspect It, Know When to Replace It, and Check What Else Got Hurt
A hard curb strike can shred a tire’s internal structure in seconds, and the damage often extends past the tire itself. Here’s how to inspect the tire, decide whether it’s driveable, and check the wheel, suspension, and alignment before sending the vehicle back out.
How to Identify and Fix Wrong-Size Trailer Leaf Springs
Installing the wrong-size trailer leaf springs is a costly mistake that can destroy shackles and create dangerous road conditions. This guide shows you how to measure spring hangers correctly, recognize sizing errors before installation, and understand why shackle geometry matters for safe trailer operation.
How to Fix Timing Belt Alignment: When One Tooth Off Is One Tooth Too Many
Timing belt installation leaves zero margin for error—being off by even one tooth can cause poor performance, fault codes, or catastrophic engine damage. This guide walks you through the proper alignment techniques, common mistakes, and professional tricks to ensure your timing marks line up perfectly every time.
How to Repair a Stripped Oil Drain Plug: Helicoil Installation and Pan Replacement Guide
Stripped oil drain plug threads are one of the most common issues techs face during routine oil changes. Whether you’re dealing with a failed Helicoil repair or factory-installed threads that finally gave out, you have several options ranging from quick thread repair to full pan replacement.
Head Gasket Diagnosis: What Clean vs. Carbon-Covered Pistons Tell You
When you pull a cylinder head and find one suspiciously clean piston surrounded by carbon-covered neighbors, you’re looking at textbook coolant intrusion. Understanding what piston condition reveals about head gasket failure helps you diagnose the problem correctly and avoid comeback jobs.
Seized Brake Rotor Retaining Screws: How to Remove Them Without Losing Your Mind
Rotor retaining screws exist to hold the rotor on the hub during assembly, and they’re notorious for rounding out or seizing in place. Here’s the field-tested order of operations technicians actually use to get them out fast, plus when it’s fine to skip replacing them.
Sidewall Nail Damage: When to Repair vs Replace Your Tire
Sidewall punctures represent one of the most debated scenarios in tire repair. While industry standards typically mandate replacement for any sidewall damage, understanding the structural differences between tread block extensions and load-bearing sidewall areas helps technicians make informed recommendations and explain safety considerations to customers.
How to Diagnose and Fix a Cracked Radiator After Hitting a Speed Bump
A seemingly minor encounter with a speed bump can crack your radiator and leave coolant pooling under your vehicle. Understanding how to diagnose the damage quickly and take the right steps can save you from turning a few hundred dollar repair into a multi-thousand dollar engine replacement.
Follow us on social media