Your cart is empty.
Subcategories
- Batteries
- hardware
- Oil & Lubricants
- shop stools
- Adhesive - Tapes - Ties
- C-Clamps
- Cans - Drums -Drum Dollies
- Chain Hoists & Cable Pullers
- Cleaning Supplies
- Creepers
- Electric Generators
- Exhaust Ventilation
- Extension Cords
- Fans
- Flow Testers
- Fluid Evacuators
- Fuel Transfer Tanks - Funnels
- Grease Guns
- Headlight Aimers
- Heat Guns & Torches
- Hydraulic Pumps
- Lighting
- Markers - Writing
- Parts Washers
- Pipe Benders
- Pressure Washers
- Pumps - Transfer
- Sand Blasters
- Shop Presses
- Thermometers
- Vacuums
- Vises
- Welding
- Winches and Hoists
Best Sellers For Shop Equipment and Supplies
-
Mini Temp Non-Contact Thermometer w Laser Sighting
Manufacturers Part #: MT4
Your Price: $82.50The MiniTemp is perfect for auto enthusiasts performing self diagnostics and for those tackling home improvement projects. Use it for spotting costly energy losses around windows and doors, monitoring critical temperatures in kitchen or workshop, or ensuring that your environment is comfortable and safe. The MiniTemp is intended for close range targets, measuring a minimum target area of 1 inch in diameter out to a distance of approximately 8 inc... -
Infrared Thermometer 52224A w/ Laser & Free MSC52220
Manufacturers Part #: 52224-A-SP
Your Price: $43.77Features Laser targeting accuracy, enhanced back-lit LCD display and an expanded temperature range of -20° to 500°, -4° to 932°.The compact design is simple to use and easy to store.Large easy to read 1" LCD display, scan mode, maximum temperature display, F/C button.Has an increased distance to spot ratio of 12 to 1.The unit includes a FREE MSC52220 1" analog thermometer (-10 to 100°).-4 to 932 F - non- contact temp readings... -
Fluid Evacuator Plus - 8.8 Liter 07201
Manufacturers Part #: MV7201
Your Price: $113.51Includes Free ShippingReplaces p/n 07201Utilizes a manual pump, so compressed air or electricity is not required.The Fluid Evacuator Plus, a large 8.8 Liter (2.3 gallon) capacity bi-functional manual unit, can be used to extract and dispense a wide-range of fluid types including: Engine oil from crankcasesBrake fluid from master cylinders and most hydraulic brake systemsGear oil from transmission casesCoolant from cooling systemsPower steering fluid from pump reservo... -
Larger Capacity Fluid Evacuator - 7400
Manufacturers Part #: MV7400
Your Price: $75.51The Mityvac MV7400 (replaces 07400) Fluid Evacuator is ideal for use in the shop or at home. The MV7400 removes all types of fluid in a range of applications from cars, trucks, boats, RVs, ATVs and small engines. The easy-to-use MV7400 Fluid Evacuator provides a larger, more durable reservoir than its predecessor the 07200, increasing the fluid capacity to 1.9 gallons (7.3 liters). Its larger base and redesigned foot stabilizer increase steadine... -
MT6 Mini Temp Non-Contact Thermometer w/ Laser Sighting -20 to 9
Manufacturers Part #: MT6
Your Price: $99.99Includes Free ShippingPortable IR thermometers have become indispensable tools for automotive troubleshooting and diagnostics. Quick non-contact temperature measurements make it easy to spot cooling system faults, identify engine misfires, check for proper A/C performance, verify catalytic converter operation and much more. The laser point sighting on the MT6 unit helps to direct measurements toward the target, and the large backlit display shows both the curren... -
PneumatiVac Air Operated Fluid Evacuator 07300
Manufacturers Part #: MV7300
Your Price: $115.06Includes Free ShippingThe PneumatiVac, a large 8.8 Liter (2.3 gallon) capacity air operated fluid evacuator, can be used to extract a wide-range of fluid types including: Engine oil from crankcases.Brake fluid from master cylinders and most hydraulic brake systems.Gear oil from transmission cases.Coolant from cooling systems.Power steering fluid from pump reservoirs. The base mounted Venturi adds stability during operation and the air and fluid-line shut off valves p... -
Infrared Non-Contact Thermometer ESIEST-65
Manufacturers Part #: EST-65
Your Price: $70.32This infrared thermometer features a double injection housing, found only on the highest quality units.The front panel controls allow switching the F and C, backlight and laser on/off without flipping the handle.Lower quality units can not switch the F, C, or Laser from the front panel, as the controls generally reside beneath the handle in the batttery compartment. Temperature Range: -58? to 1022° (-50? to 500°).Accuracy: ? 2% of readin... -
2 Inch Replacement Creeper Wheel
Manufacturers Part #: 96132
Your Price: $4.90The 96132 2" oil resistant plastic wheel is standard on all Lisle steel creepers.This low-profile wheel comes with a cap nut and lock washer to prevent loosening. Features: Applications include Lisle low profile steel creepers #96102, 96202 & 96302.Oil resistant plastic ball bearing wheel offers a quiet, easy glide even over rough floors.Wheel is 2" diameter.Overall Height is 2 1/2".Shipping weight 6 oz. Lisle 96132 2" Replacement Creeper Wheel ... -
Wheel for Bone Creeper 5 Inch Dia Each
Manufacturers Part #: 6033-1
Your Price: $16.28Each 5" Diameter x 1" Wide Dale Adams Enterprises 6033-1 Wheel for Bone Creeper ...
Featured Products - Shop Equipment and Supplies
-
120 Volt 95 Amp Stick/TIG Package
Manufacturers Part #: W1003210
Your Price: $468.06Includes Free ShippingThe 95i DC Stick and Stick/TIG welding systems are lightweight at only 4.4 kg (9.7 lbs) for portability, suitable for outdoor use, and comes complete with everything you need to start welding. Features: DC output for TIG welding stainless, mild steel, and chrome molys Lift TIG Start provides optimized TIG arc starting without the use of high frequency 90 A of output capable of welding 2.4 mm (3/32 in.) electrodes ... -
King Pin & Brake Anchor Pin Pusher - 30 Ton Capacity
Manufacturers Part #: 4240A
Your Price: $2,012.01Includes Free ShippingOTC 4240 Features: Hydraulic force & precision tooling replace torch & hammer methods to remove king pins & anchor pins from most models of trucks & buses.When servicing king pins, this unit is quickly mounted on the front axle ... a unique "swinging gate" feature makes setup easy.Both straight & tapered king pins may be serviced.Five special collars & two pins accommodate king pins of 7/8" to 2" in diameter & up to 11 1/4" long.With tooling in ... -
Hoppy Vision 100 V100 Battery Pack
Manufacturers Part #: 4-820-59
Your Price: $72.99Replacement battery pack for V100 Vision 100 Professional Optical Headlight Aimer American Aimers 4-820-59 Hoppy Vision 100 Battery Pack ... -
Caster Assembly for Bonester Creeper
Manufacturers Part #: 4033
Your Price: $34.37Caster for Bonester Creeper model 4031 To clear up confusion about Bone Creeper terminology, their casters are divided into three parts: wheel, axle and fork. The wheel is the plastic part with the black rubber tire. The fork is the metal part that swivels. The axle is the bolt that runs through the center of the wheel, fastening it to the fork. The caster is the entire assembly combined (wheel, fork and axle). For Bonester Creeper wheel only, o... -
Sentry Tank Monitor Alarm, 9V Battery
Manufacturers Part #: 7670
Your Price: $214.95Includes Free ShippingFor use with oil, waste oil, diesel fuel, antifreeze, water and other fluids with a low flash point. Avoid costly overflows or untimely inventory shortages. Engineered for most single and double walled aboveground tanks. Alarm sounds for up to four days on a fresh battery. Ideal for remote areas where AC power is not accessible.Simple installation; easy maintenance.Push button test switch.Toggle switch silences alarm.Invert float to switch betwe... -
Replacement Battery Charger for Vision 100
Manufacturers Part #: 4-820-58
Your Price: $58.78For Vision 100. Hoppy 4-820-58 Replacement Battery Charger ... -
Genuine Water Sprite (791 SQ IN)
Manufacturers Part #: WS816
Your Price: $14.58This exclusive, proven, PVA Drying Cloth actually lifts off residual dirt and grime away from the surface, leaving it sparkling clean and dry. It is used in place of a sponge or towel and when damp, can be used immediately upon removal from its package. Gentle to fine finished surfaces. Highly absorbent and lint-free. Not affected by mildew, bacteria or common household chemicals. SM Arnold WS816 Genuine Water Sprite (791 SQ IN) ... -
Vision 100 Professional Optical Headlight Aimer V100
Manufacturers Part #: 82005
Your Price: $1,872.20Includes Free ShippingThe Hoppy Vision 100 Photometric Headlight Aimer has received the prestigious Innovation Tools Award sponsored by Professional Tool and Equipment News. It was selected by a panel of shop owners and technicians all of whom are Certified Master Technicians. The criteria for the selection include uniqueness, improvement over existing products, time saving ability and cost. The Hoppy Vision 100 Photometric Headlamp Aimer is the result of a concentrat... -
Uni Ram UR007 Blast Vac Reclaiming Sand Blaster
Manufacturers Part #: UR007
Your Price: $1,219.41Includes Free ShippingBlast away dirt, rust, paint and other unwanted deposits.For use with abrasive media including silica sand, glass beads, metal shot, aluminum oxide and nut shells.Readies surface for refinishing.Ideal for use in automotive, marine and industrial refinishing.Vacuum system, not available with conventional sand blasters, extracts debris and used abrasive.Filter system segregates used abrasive for reuse. Turbine vacuum system: Reduces abrasive consu...
Recently Added Products In Shop Equipment and Supplies
-
New 14" Classic Patented One Pass Y-Bar Design Waterblade
Manufacturers Part #: 25-926
Your Price: $15.44One Pass Patented Y-Bar™ edge sheds water droplets easier. Easily glides over and around chrome strips, sharp edges and grooves. Soft Medical Grade Silicone Blade will not scratch. Adjustable extension handle adapter available (25-930 sold separately). SM Arnold 25-926 New 14" Classic Patented One Pass Y-Bar Design Waterblade AR25-926... -
48/CS 3/4" 233+ TAPE
Manufacturers Part #: 26334CS
Your Price: $182.49Includes Free Shipping3/4" Scotch(R) Premium Automotive 233+ Masking Tape... -
41-Piece Machine Screw SAE/Met
Manufacturers Part #: 1840234
Your Price: $235.51Includes Free ShippingThe Irwin Tools - Hanson PTS (Performance Threading System) Taps are the most innovative products in the threading industry in decades. With an increased flute taper in the taps, the new products are 20% more durable and up to 30% easier to break chips with. Irwin has also redesigned the entire drive tool system. With a die lock ergonomic die handle that also accepts two different adjustable tap sockets, this all encompassing drive tool set will ... -
24" Steel Row Center Push Broom Head Only
Manufacturers Part #: 463
Your Price: $20.9824” Steel Row Center Push Broom Head Only 463 Steel row center push brooms have 3” trim, staple set into a lacquered hardwood block with two acme thread holes. Center row of steel works well for dislodging caked dirt, while tampico resists acids and sweeps away the debris. *USA made quality brushes and cleaning tools since 1855 Laitner Brush 463 24” Steel Row Center Push Broom Head Only ... -
Air / Hydraulic Pump - 98 cu in Metal Reservoir
Manufacturers Part #: 4025
Your Price: $759.19Includes Free ShippingFeatures: With shop air as the energy source, pump has the power & oil capacity to drive even the large 55 ton rams.Ideal all around power source for dozens of body, frame, & alignment applications.Can be used w/ a variety of rams, presses, & hydraulic pullers operating at up to 10,000 PSI.An internal relief valve protects the hydraulic components regardless of hydraulic pressure. Two stage release mechanism gives fast or metered ram return whil... -
Economy Adjustable Ratchet Headgear
Manufacturers Part #: 1441-0042
Your Price: $17.83Streamlined, compact design allows welders to get into tight places. Meets or Exceeds: ANSI Z87-1, CE and various International Standards. Victor-Firepower 1441-0042 Economy Adjustable Ratchet Headgear VQ1441-0042... -
Scotchcal Striping Tape, 1/8 Inch, Gold Metallic
Manufacturers Part #: 70203
Your Price: $8.06Scotchcal Striping Tape, 1/8 Inch, Gold Metallic 70203 Product Description Single stripe pattern for professional use in matching existing stripes or creating original striping designs on vehicles. PN70203, Gold Metallic, 1/8 in x 40 ft Additional Product Information 3M Part Number 70203 UPC 00051141702032 Case Inner Pack 1 roll Width 1/8 inch Color Gold Metallic Size 1/8 inch x 40 feet Stripe Color(s) Gol... -
Solar Powered Auto Dark Welding Helmet - Gear Head
Manufacturers Part #: 41290
Your Price: $94.43Features and Benefits Solar Powered Auto Dark Welding Helmet Gear-Head Large 3.86" x 2.17" viewing area Automatically changes from a light to dark state as arc is struck Variable shades from DIN 9 DIN 13 ... -
PLYSTGR DS LED 120V 2HLD BK
Manufacturers Part #: 76835
Your Price: $137.82Includes Free ShippingTwo switches are better than one! The Stinger DS® LED is the only rechargeable flashlight with a fully independent dual switch. Now with C4 LED Technology. DUAL SWITCH TECHNOLOGY – Access any of the three variable lighting modes and strobe via the tail cap or the head-mounted switch Head switch operates independently from the tail cap switch The combination of a rechargeable battery and a 50,000 hour lifetime C4 LED results in the lowest oper...