Free shipping on orders overFree shipping over $250 Lower 48 states and DC. Excludes freight and oversize.
Tire Tools, Wheels & Suspension Archives - Toolsource Blog
Diagnosing Steering Noise at Full Lock: A Technicians Troubleshooting Guide
Diagnosing Steering Noise at Full Lock: A Technician’s Troubleshooting Guide

Noises at full steering lock are common on older vehicles, but “most cars make some noise” isn’t a diagnosis. This guide walks through a systematic check of strut mounts, CV joints, tie rod ends, and the steering rack so you can isolate the actual source before quoting a repair.

November 20, 2026 by Toolsource Technical Team
Broken Rear Coil Spring: Is It Safe to Drive, and How to Replace It Right
Broken Rear Coil Spring: Is It Safe to Drive, and How to Replace It Right

A snapped rear coil spring looks like a minor annoyance but it’s a genuine road hazard — and the repair itself has put technicians in the hospital. Here’s a practical, no-fluff walkthrough of diagnosis, safe removal, and installation.

November 19, 2026 by Toolsource Technical Team
Diagnosing Wheel Wobble and Bent Rims: A Technicians Troubleshooting Guide
Diagnosing Wheel Wobble and Bent Rims: A Technician’s Troubleshooting Guide

Wheel wobble and bent rims often trace back to improper bead seating, mismatched torque, or lowering springs that transmit road impacts directly into the wheel. This guide walks through a systematic diagnostic process technicians can use to isolate the cause before recommending repair or replacement.

November 18, 2026 by Toolsource Technical Team
I-95 Gridlock vs. the Scenic Route: A Technicians Guide to Smarter Long-Distance Road Trip Planning
I-95 Gridlock vs. the Scenic Route: A Technician’s Guide to Smarter Long-Distance Road Trip Planning

Drivers who regularly run the Carolinas-to-Pennsylvania corridor consistently steer away from I-95 near DC in favor of I-81 through Virginia and West Virginia. Here’s how to plan the route, prep your vehicle, and pack the right gear before a long highway drive.

November 17, 2026 by Toolsource Technical Team
Diagnosing Catastrophic Strut and Suspension Failures Before They Become a Liability
Diagnosing Catastrophic Strut and Suspension Failures Before They Become a Liability

Viral dashcam clips of cars “dribbling” down the highway on a shot strut aren’t just entertainment — they’re a diagnostic case study. Here’s how to isolate failed struts, springs, control arms, and trailing arms before a customer’s suspension fails completely on the road.

November 15, 2026 by Toolsource Technical Team
Steering Wheel Shaking at Low Speed: A Technicians Diagnostic Walkthrough
Steering Wheel Shaking at Low Speed: A Technician’s Diagnostic Walkthrough

A shaking steering wheel at low speed is never just an annoyance — it’s often a warning sign that a wheel, tire, or front-end component is close to failure. This guide walks through the same diagnostic sequence shop technicians use to isolate the cause fast, from visual inspection to the front/rear tire swap test.

November 13, 2026 by Toolsource Technical Team
Beyond the Flat: Spotting Hidden Suspension Damage After a Curb Strike
Beyond the Flat: Spotting Hidden Suspension Damage After a Curb Strike

A blown tire or bent rim is rarely the whole story after a hard curb strike. This guide walks techs through a systematic front-end inspection, the failure points that get missed, and how to document damage so customers understand why “just the tire” isn’t an option.

November 7, 2026 by Toolsource Technical Team
Steering Wheel Shaking at Highway Speed? A Diagnostic Walkthrough for Techs
Steering Wheel Shaking at Highway Speed? A Diagnostic Walkthrough for Techs

A customer complaint of “shaking at highway speed” almost always traces back to one of five causes — but chasing them in the wrong order wastes time and parts. This walkthrough gives techs a repeatable diagnostic sequence, from tire balance through CV axles and heat-damaged brake hardware.

November 5, 2026 by Toolsource Technical Team
Diagnosing Highway-Speed Wheel Vibration: A Step-by-Step Guide for Techs
Diagnosing Highway-Speed Wheel Vibration: A Step-by-Step Guide for Techs

Vibration that shows up only in a narrow speed window is almost always balance-related, but “balance-related” covers more ground than a quick static spin. This guide walks techs through a repeatable diagnostic sequence — from weight placement to road force balancing to centering rings — before anyone starts throwing parts at the problem.

November 3, 2026 by Toolsource Technical Team
Bent or Cracked Wheel: A Technicians Guide to Repair vs. Replace Decisions
Bent or Cracked Wheel: A Technician’s Guide to Repair vs. Replace Decisions

Pothole and curb strikes bend and crack wheels every day, and the repair-or-replace call isn’t always obvious. This guide walks through inspection steps, material considerations, realistic repair costs, and when to walk away from a repair entirely.

October 28, 2026 by Toolsource Technical Team