Melted Plastic Fuel Tank? How to Diagnose and Repair Chemical Fuel Contamination
When a plastic fuel tank shows up melted, gooey, or flaking from the inside, it’s almost never a fuel quality issue — it’s chemical contamination or a botched sealer job. This guide walks techs through safe diagnosis, teardown order, and repair/replace decisions for jobs like this.
Fuel System Sabotage: A Technician’s Guide to Diagnosing Tank Tampering and Hardening Against Repeat Attacks
When a customer rolls in with a no-start and a mystery jar of sludge from their fuel neck, the diagnosis matters as much as the fix. This guide walks technicians through identifying common fuel tampering contaminants, the correct repair sequence, and practical hardening steps to recommend so the vehicle doesn’t come back with the same problem.
E85 in the Shop: What Techs Need to Know Before Customers Fill Up
E85 isn’t inherently harmful to a vehicle — but it isn’t a drop-in swap for every customer either. This guide breaks down the compatibility checks, component wear points, and cost math technicians need when a customer asks “can I run E85 in this?”
BMW Fuel Pump Lock Ring Removal: The Right Way to Avoid a Two-Hour Nightmare
Removing a BMW fuel pump lock ring shouldn’t take two hours or destroy the plastic ring. This guide covers the preparation work, proper tools, and step-by-step technique that separates a 10-minute job from an all-day disaster—straight from technicians who’ve done it right and wrong.
Car Won’t Start or Stalls After Refueling? Here’s What’s Actually Wrong
When a customer says “it wouldn’t start after I filled up,” the reflex diagnosis is bad fuel — but that’s almost never the real cause. This guide walks through the actual failure points: stuck-open EVAP purge solenoids, tank sediment, and how to tell coolant smoke from oil smoke before you start throwing parts at it.
Gasoline in a Diesel Before Delivery: Technician Playbook for Diagnosis, Repair, and Customer Handling
Practical, step-by-step guidance for shop teams when gasoline is mistakenly added to a diesel vehicle before delivery. Covers triage, drain and flush procedures, inspection for HPFP damage, verification testing, documentation, and customer communication.
Follow us on social media