Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Engine Repair > Bearing - Bushing Pullers & Inst > Pilot Bearing Pull

Pilot Bearing Puller

Pilot Bearing Puller
Pilot Bearing Puller

This item supersedes SK 92522

  • When working space is limited, this type of puller is needed to remove flywheel pilot bearings from autombiles, trucks, and tractors.
  • Only 7 1/2" long.
  • Can also be used to pull bearings or bushings from generators or starters.
  • Includes 1/2" to 1 1/4" ID Capacity jaws.
  • Strength - helps pull out tough bearings.
  • Short length - allows reach into tighter areas.
  • Versatility - works on automobiles, trucks, and tractors.
  • Made in the U.S.A.
    • Shipping Weight: 2.3lbs
    • Manufactured by: Mountain
    • Toolsource #: 97794
    • Manufacturers Part #: 9001
    • Also Known As: MTN9001

    We have 133 in stock

    List Price: $45.00
    You save: $25.36

    Related Products

    Customers Also Purchased:

    • Digital MultiMeter - UL Listed
      Digital MultiMeter - UL Listed
      Manufacturers Part #: DMM20UL
      Your Price: $20.55
      UL ListedAC Voltage 200/600V DC Voltage 200mV/2/20/200/600VResistance 200/2k/20k/200k/2MDC Current 2mA/20m/200mA/10ABattery Test 1.5V/9VDiode TestContinuity Buzzer All returns on General Tools & Instruments products have a 20% restock fee. General Tools & Instruments DMM20UL Digital MultiMeter - UL Listed ...
    • Master Disconnect Set
      Master Disconnect Set
      Manufacturers Part #: 39900
      Your Price: $40.93
      Contains 8 popular disconnect tools for A/C & fuel lines.A complete set of disconnect tools that can be stored in a handy blow-molded case.All disconnect tools are also available individually. Includes: 37000 AC/Fuel Line Disconnect Set39400 Angled AC/Fuel Line Disconnect Set35000 Flex Fuel Disconnect for GM37500 Fuel Line Quick Disconnect for GM39930 5/16" & 3/8" Scissor Disconnect39940 Coupler Disconnect39960 Ford Transmission Line Disconnect S...
    • Memory Saver
      Memory Saver
      Manufacturers Part #: MSBD28
      Your Price: $15.47
      Prevent the loss of electronic memory when disconnecting the vehicle's battery. High visibility coiled cord stretches to 8 feet!LED indicates power source is connected.Easy storage in tool box.OBD2 connection uses positive and ground pins only, will not interfere with fault codes.Coiled cord prevents tangles.In line fuse.Cigarette lighter input. (12 volt power source not included.) EZ Red MSBD28 Memory Saver ...
    • Spark Tester
      Spark Tester
      Manufacturers Part #: 19380
      Your Price: $7.46
      Tests spark plugs, spark plug wires and coils without puncturing the wire.With the engine running, place the grooved end of the tool over the plug wire.The bulb will flash to indicate spark. Lisle 19380 Spark Tester ...
    • General Service Impact Chisel Set - 10-Pc
      General Service Impact Chisel Set - 10-Pc
      Manufacturers Part #: CS110
      Your Price: $55.71
      This set contains the most popular .401 shank chisels to handle a wide variety of job types.High quality steel with black oxide finish.Lifetime Warranty.Comes in molded tray. Set includes: CH116 Rivet CutterCH102 3/4" Flat ChiselCH113 Straight PunchCH111 Tapered PunchCH110 Panel CutterCH118 Bushing SplitterCH120 Muffler CutterCH125 5/16" Nut SplitterCH115 Dual Blade Panel CutterCH117 1" Hammer Grey Pneumatic CS110 General Service Impact Chisel S...

    Customers Also Shopped For:

    • 2-13/32" PROTO-EASE Gear & Bearing Separator
      2-13/32" PROTO-EASE Gear & Bearing Separator
      Manufacturers Part #: J4331
      Your Price: $43.52
      J4331 - 2-13/32" PROTO-EASE Gear & Bearing Separator Features and Benefits Capacity: 2-13/32" Weight 1.48 lbs. Product Details Weight 1.48 lbs Warranty Use safety goggles, serious eye injury is possible Do not use a power impact wrench with any puller Instructions: Use the largest puller of jaw that fits the job, use 3 jaws, if possible, square pullers to work; jaws and screw panel, shield work to p...
    • SAE Socket Tray Set 3 Pc
      SAE Socket Tray Set 3 Pc
      Manufacturers Part #: 9301
      Your Price: $24.30
      Set includes one 1/4", 3/8" and 1/2" drive tray which hold the following sizes: 1/4" Tray holds 26 Sockets - Sizes 1/8" to 5/8" 3/8" Tray holds 26 Sockets - Sizes 1/4" to 1" 1/2" Tray holds 28 Sockets - Sizes 3/8" to 1 1/4" Hansen socket trays straighten out toolbox clutter and chaos Patented socket trays are made of tough ABS Plastic that resists gas, oil and abuse Provides easy access...
    • Rear Main Oil Seal Installer
      Rear Main Oil Seal Installer
      Manufacturers Part #: J-34686
      Your Price: $251.69Includes Free Shipping
      Applications: (2.0, 2.2, 2.8, 3.1, 3.4) S/T, U, W, JNC J 34868 is a rear main seal installer for the listed engines. This tool has a unique spin handle design to allow the technician to easily install the rear main seal squarely and to the correct depth. Non-stock item, manufacturer drop ship; please email for cost and lead time before ordering. This is a non-quoted item and the price fluctuates; we have to get pricing eac...
    • Pilot Bearing Puller 1/2 to 1 1/2 Inch
      Pilot Bearing Puller 1/2 to 1 1/2 Inch
      Manufacturers Part #: 1170
      Your Price: $70.03
      Versatile puller built specially for inside pulling jobs, & particularly for removing flywheel pilot bearings on automobiles, trucks, & tractors.Also very practical for pulling motor, generator, & magneto bearings. I.D. Max. Spread 1 1/2" I.D. Min. Spread 1/2" Reach 3/4" Weight 4 lbs. 14 oz. OTC 1170 Pilot Bearing Puller - 1/2" to 1-1/2" ...
    • Air Hammer Kit w/ 5 Chisels
      Air Hammer Kit w/ 5 Chisels
      Manufacturers Part #: 116K
      Your Price: $63.69
      Ingersoll-Rand IR116K Air Hammer Kit with 5 Chisels The economical air hammer for fast cutting action, especially for medium exhaust system, panel cutting, and general repair work. Up to 3,500 blows per minute. Handles a range of cutting applications. Longer life alloyed steel barrel and heat-treated piston. Chisel kit includes: Edging Tool, Tail Pipe Cutter, Straight Chisel, Cutting Chisel and Punch in plastic pouch. Ingersoll-Rand 116K Air Ha...
    • Driver Tool Disc - 2 3/8 In Dia
      Driver Tool Disc - 2 3/8 In Dia
      Manufacturers Part #: 27521
      Your Price: $18.14
      Driver Tool Disc - 2 3/8 In Dia Features: Disc is 1/2" thick.Use disc as part of an assemble your own, custom made driver tool. ...

    Current Reviews: 0