Camshaft Tools

Camshaft Tools

Camshaft tools are a vital part of any automotive mechanic's toolkit. They are used to remove, install, and adjust camshafts on engines. Camshafts are responsible for opening and closing the valves in an engine, so it is essential to have the right tools to work on them.

There are a variety of camshaft tools available, each designed for a specific purpose. Some of the most common camshaft tools include:

  • Camshaft pullers and installers
  • Camshaft alignment tools
  • Camshaft lapping tools
  • Camshaft bearings
  • Camshaft caps
  • Camshaft sprockets
  • Camshaft seals

Camshaft tools can be purchased individually or as part of a camshaft tool set. Camshaft tool sets typically include all of the essential tools needed to remove, install, and adjust a camshaft.

When choosing camshaft tools, it is important to consider the type of engine you will be working on. Camshaft tools are designed for specific engines, so it is important to make sure that the tools you purchase are compatible with your engine.

Camshaft tools can be expensive, but they are a worthwhile investment for any automotive mechanic. By having the right camshaft tools, you can save time and money and ensure that your work is done correctly.

Types of Camshaft Tools

  • Camshaft pullers and installers: These tools are used to remove and install camshafts. Camshaft pullers typically use a threaded rod and a lever to remove the camshaft from the engine. Camshaft installers are used to install the camshaft in the engine and align it with the crankshaft.
  • Camshaft alignment tools: These tools are used to ensure that the camshaft is properly aligned with the crankshaft. Camshaft alignment tools typically use a dial indicator to measure the clearance between the camshaft and the crankshaft.
  • Camshaft lapping tools: These tools are used to smooth the surface of the camshaft lobes. Camshaft lapping tools typically use a fine abrasive compound to remove any burrs or scratches from the camshaft lobes.
  • Camshaft bearings: These bearings are used to support the camshaft in the engine. Camshaft bearings are typically made of a soft material, such as copper or aluminum, that will conform to the camshaft and provide a smooth surface for the camshaft to rotate on.
  • Camshaft caps: These caps are used to cover the camshaft journals. Camshaft caps are typically made of steel or aluminum and are held in place with bolts or nuts.
  • Camshaft sprockets: These sprockets are used to drive the camshaft. Camshaft sprockets are typically made of steel or aluminum and are attached to the camshaft with bolts or nuts.
  • Camshaft seals: These seals are used to prevent oil from leaking past the camshaft. Camshaft seals are typically made of rubber or silicone and are installed in the camshaft housing.

Subscribe to our newsletter in order not to miss new arrivals, promotions, and discounts of our store

Follow us on social media