Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Engine Repair > Bearing - Bushing Pullers & Inst > Pilot Bearing Puller 1/2 to 1 1/2 In

Pilot Bearing Puller 1/2 to 1 1/2 Inch

Pilot Bearing Puller 1/2 to 1 1/2 Inch
  • Versatile puller built specially for inside pulling jobs, & particularly for removing flywheel pilot bearings on automobiles, trucks, & tractors.
  • Also very practical for pulling motor, generator, & magneto bearings.
I.D. Max. Spread1 1/2"
I.D. Min. Spread1/2"
Reach3/4"
Weight4 lbs. 14 oz.

OTC 1170 Pilot Bearing Puller - 1/2" to 1-1/2"
  • Shipping Weight: 3.65lbs
  • Manufactured by: OTC Tools and Equipment
  • Toolsource #: 62730
  • Manufacturers Part #: 1170
  • Also Known As: OT1170, OTC-1170, OTC1170

Only 2 left in stock - order soon

Inventory available from other suppliers, prices may be different


List Price: $78.00
You save: $4.75
$73.25

Frequently bought together:


Related Products

  • Front Hub Puller for 4WD Vehicles
    Front Hub Puller for 4WD Vehicles
    Manufacturers Part #: 7901
    Your Price: $124.74
    Front Hub Puller for 4WD Vehicles Needed to remove the front hub assembly when wheel bearing or brake rotor service is required. Services 3/4- and 1 -ton 4WD pickups with 8-bolt hubs: 1994 and newer Dodge Ram and 1988 and newer Chevrolet and GM. For maxi- mum pulling force, use OTC`s No. 7703 10-lb. slide hammer. Wt., 5 lbs. ...
     Add to Cart  Details 
  • Crankshaft Balancer Puller Adapter Set for GM
    Crankshaft Balancer Puller Adapter Set for GM
    Manufacturers Part #: 7911
    Crankshaft Balancer Puller Adapter Set for GM Includes shulder bolts and spacer adapter. Wt., 8 oz. ...
  • Crankshaft Balancer Puller Kit for GM
    Crankshaft Balancer Puller Kit for GM
    Manufacturers Part #: 7912
    Your Price: $103.50
    Everything you need to pull harmonic balancers with three tapped holes.The shoulder bolts are designed to prevent them from being installed too deply, protecting the crank sensor and/or interrupter rings from damage.The spacer adapter gives the puller`s forcing screw something to push against.The kit works on 1990 and newer 3300 and 3800 V-6 engines.Includes No. 518 Flange-type Puller and No. 7911 Adapter Set.The 7911 Adapter Set consists of the...
     Add to Cart  Details 
  • GM Steering Wheel Puller Legs
    GM Steering Wheel Puller Legs
    Manufacturers Part #: 7929A
    Your Price: $22.03
    Legs do the work of three separate Kent-Moore tools: J-42120, J-42578, and J-36541-A.GM eliminated the tapped holes in the steering wheel assembly on late model cars and vans, making these puller legs the only way to remove the wheel without damage. They`re used with OTC steering wheel puller No. 7245 or 7403 to get behind the steering wheel assembly to give a straight, even pull. Works on: Pontiac: 1988-93 Lemans; 1997-current Grand Prix, Tran...
     Add to Cart  Details 
  • Ford Vacuum Front Hub Release Tool Set w/ Puller
    Ford Vacuum Front Hub Release Tool Set w/ Puller
    Manufacturers Part #: 7932
    Ford Vacuum Front Hub Release Tool Set For CV joint, ball joint, and wheel bearing sensor service, the only way to remove Ford`s new vacuum hub without breaking it is with this tool set. Hubs are plastic, standard removal tools simply will not pull them without damage. Removal clips slip into the slots on the hub to release the connection, puller contains the clips and hub for removal. Designed for 1998 and newer 4X4s with vacuum front hubs: Ra...
  • 8-Way Slide Hammer Puller Set
    8-Way Slide Hammer Puller Set
    Manufacturers Part #: 7947
    Your Price: $206.76
    You can pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. Jaws can be set up for 2/3 way internal or external pulling jobs. Includes: Slide hammer with 5 lb. hammer, rear axle pulling attachment, 3-way cross-head, cone, 2-way cross-block, puller hook attachment, pulling jaws (3) for internal or external pulling jobs, grip wrench adapter with single lead (wrench not included) and a dent puller attachment.Also ...
     Add to Cart  Details 
  • 10-Way Slide Hammer Puller Set
    10-Way Slide Hammer Puller Set
    Manufacturers Part #: 7948
    Your Price: $341.73
    You can pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. Jaws can be set up for 2/3 way internal or external pulling jobs. Includes: No. 1155 - Slide hammer w/5 lb. hammerNo. 7372 - Rear axle pulling attachmentNo. 24544 - 3-way cross headNo. 24545 - ConeNo. 27241 - 2-way cross blockNo. 27315 - Puller hook attachmentNo. 34698 - Pulling jaws (3) for internal or external pulling jobsNo. 205378 - Grip wrench ada...
     Add to Cart  Details 
  • Puller Adapter 5/8-18 Female To 1/4-20 Male
    Puller Adapter 5/8-18 Female To 1/4-20 Male
    Manufacturers Part #: 8000
    Your Price: $15.11
    Male-Female Threaded Adapters For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc. Female end 5/8" - 18, Male end 1/4" - 20, Length 2 1/4" ...
     Add to Cart  Details 
  • Puller Adapter 5/8-18 Female To 5/16-18 Male
    Puller Adapter 5/8-18 Female To 5/16-18 Male
    Manufacturers Part #: 8001
    Your Price: $26.53
    Male-Female Threaded Adapters For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc. Female end 5/8" - 18, Male end 5/16" - 18, Length 2 1/4" ...
     Add to Cart  Details 

Customers Also Purchased:

Customers Also Shopped For:

  • GM Steering Wheel Puller Legs
    GM Steering Wheel Puller Legs
    Manufacturers Part #: 7929A
    Your Price: $22.03
    Legs do the work of three separate Kent-Moore tools: J-42120, J-42578, and J-36541-A.GM eliminated the tapped holes in the steering wheel assembly on late model cars and vans, making these puller legs the only way to remove the wheel without damage. They`re used with OTC steering wheel puller No. 7245 or 7403 to get behind the steering wheel assembly to give a straight, even pull. Works on: Pontiac: 1988-93 Lemans; 1997-current Grand Prix, Tran...
     Add to Cart  Details 
  • Pilot Bearing Puller
    Pilot Bearing Puller
    Manufacturers Part #: 9001
    Your Price: $19.18
    Pilot Bearing Puller This item supersedes SK 92522 When working space is limited, this type of puller is needed to remove flywheel pilot bearings from autombiles, trucks, and tractors.Only 7 1/2" long.Can also be used to pull bearings or bushings from generators or starters.Includes 1/2" to 1 1/4" ID Capacity jaws.Strength - helps pull out tough bearings.Short length - allows reach into tighter areas.Versatility - works on automobiles, trucks, a...
     Add to Cart  Details 
  • Front Hub Puller for 4WD Vehicles
    Front Hub Puller for 4WD Vehicles
    Manufacturers Part #: 7901
    Your Price: $124.74
    Front Hub Puller for 4WD Vehicles Needed to remove the front hub assembly when wheel bearing or brake rotor service is required. Services 3/4- and 1 -ton 4WD pickups with 8-bolt hubs: 1994 and newer Dodge Ram and 1988 and newer Chevrolet and GM. For maxi- mum pulling force, use OTC`s No. 7703 10-lb. slide hammer. Wt., 5 lbs. ...
     Add to Cart  Details 
  • Brake Drum & Rotor Kit
    Brake Drum & Rotor Kit
    Manufacturers Part #: 72-010-777
    Your Price: $36.68
    Brake Drum & Rotor Kit Caliper not included. ...
     Add to Cart  Details 
  • Battery Filler
    Battery Filler
    Manufacturers Part #: 14600
    Your Price: $4.60
    Battery Filler Rubber bulb has 6 oz. capacity. Spout is long and flexible. Designed for long life and dependable service. Lightweight and easy to use. Made to resist acid and retain shape. Features a built in hang up hole. Always wear eye and face protection when servicing batteries. ...
     Add to Cart  Details 
  • Crankshaft Balancer Puller Kit for GM
    Crankshaft Balancer Puller Kit for GM
    Manufacturers Part #: 7912
    Your Price: $103.50
    Everything you need to pull harmonic balancers with three tapped holes.The shoulder bolts are designed to prevent them from being installed too deply, protecting the crank sensor and/or interrupter rings from damage.The spacer adapter gives the puller`s forcing screw something to push against.The kit works on 1990 and newer 3300 and 3800 V-6 engines.Includes No. 518 Flange-type Puller and No. 7911 Adapter Set.The 7911 Adapter Set consists of the...
     Add to Cart  Details 

Current Reviews: 0