Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Hand Tools > Pullers > Pullers and Pushers > Flywheel Pilot Bearing Puller - 1 In

Flywheel Pilot Bearing Puller - 1 In ID

Flywheel Pilot Bearing Puller - 1 In ID

  • Makes quick work of pulling stubborn & rusted bearings.
  • Designed for 1" I.D. bearings.
  • The forcing screw expands the jaws inside the bearing, & at the same time, pushes against the crankshaft.
  • Weight: 1 lb. 3 oz.
OTC 5049 Flywheel Pilot Bearing Puller - 1 In ID

  • Shipping Weight: 1.5lbs
  • Manufactured by: OTC Tools and Equipment
  • Toolsource #: 62627
  • Manufacturers Part #: 5049
  • Also Known As: OT5049, OTC-5049, OTC5049

Only 1 left in stock - order soon

$260.15

Related Products


Customers Also Purchased:

  • 1/2 In Dr Axle Nut 6 Pt Deep Metric Impact Socket - 36mm
    1/2 In Dr Axle Nut 6 Pt Deep Metric Impact Socket - 36mm
    Manufacturers Part #: 34286
    1/2 In Drive 6 Pt Deep Metric Impact Socket - 36mm Made entirely in the U.S.A., featuring quality workmanship and value. The patented SureGripr hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. The new black coating retains more rust preventative compound than black oxide. Sp...
  • Pitman Arm Puller
    Pitman Arm Puller
    Manufacturers Part #: 6496
    Your Price: $67.33
    New patented design saves time, increases productivity.Labor intensive removal of steering sector is now unnecessary.Compact design of puller allows easy access to the Pitman arm.Live center on forcing screw and easy use of a standard wrench results in less effort required.Works on most domestic SUVs and pickups.Tool is forged steel for durability and long life.Pays for itself on its first job.Works on the following four-wheel-drive vehicles: 19...
  • Stinger Power Steering Pump Pulley Service Set
    Stinger Power Steering Pump Pulley Service Set
    Manufacturers Part #: 4530
    Your Price: $39.99
    Stinger Power Steering Pump Pulley Service Set A complete set of tools required to remove and install power steering pump pulleys of most domestic vehicles.Fits pulley hubs with diameters of 1- 1/8", 1-1/4", 1- 5/16" and 1-3/8".Includes the necessary adapters for servicing: GM 3.1 L, 3100, 3400, and 3800 V6 engines, GM 2.3L Quad 4 four-cylinder engines and Ford 4.6L, 5.4L, and 5.8L modular V8 engines.Housed in a blow-molded storage case to prote...

Customers Also Shopped For:

  • Bearing Puller
    Bearing Puller
    Manufacturers Part #: J-43276
    Your Price: $177.73Includes Free Shipping
    Bearing Puller J-43276 Tool Number: J-43276 Tool Name: Bearing Puller Applications: V6 HIGH FEATURE ENGINE The pilot bearing has been updated on all inline engine applications. If service requires removing the pilot bearing, it must be drawn evenly out of the crankshaft. J-43276 has an outer puller that engages the inside diameter of the pilot bearing, and a forcing screw that passes through this body to act against the back of the ...
  • Pilot Bearing Puller
    Pilot Bearing Puller
    Manufacturers Part #: 9001
    Your Price: $19.64
    Pilot Bearing Puller This item supersedes SK 92522 When working space is limited, this type of puller is needed to remove flywheel pilot bearings from autombiles, trucks, and tractors.Only 7 1/2" long.Can also be used to pull bearings or bushings from generators or starters.Includes 1/2" to 1 1/4" ID Capacity jaws.Strength - helps pull out tough bearings.Short length - allows reach into tighter areas.Versatility - works on automobiles, trucks, a...
  • Deluxe Strap Oil Filter Wrench
    Deluxe Strap Oil Filter Wrench
    Manufacturers Part #: 803
    Your Price: $21.30
    This deluxe wrench adjusts quickly to any spin-on filter. Features 3/8-in. and 1/2-in. forged driver and heavy duty strap for high torque requirements. Fits filters up to 9-in. (228mm) Cal-Van Tools 803 Deluxe Strap Oil Filter Wrench ...
  • 3/8 Inch Angled Disconnect Tool for Fuel and AC Lines
    3/8 Inch Angled Disconnect Tool for Fuel and AC Lines
    Manufacturers Part #: 39420
    Your Price: $2.48
    Disconnects Air Conditioning and Quick Connect Fuel Lines. Connect Fuel Lines. Angled handle to access tight spots.Made of durable plastic that resists fuels and solvents. Lisle 39420 3/8" Angled Disconnect Tool ...
  • Heavy Industrial 54" Roll Cabinet, Blue
    Heavy Industrial 54" Roll Cabinet, Blue
    Manufacturers Part #: 50885BL
    Your Price: $2,399.04
    Frame is reinforced using 14 gauge plates on the front of cabinet. Rigidity frame is significantly increased with full height & width triple channel wall. Three layers f metal guard the corners with interlock corner design. Two pairs 120 lb. rated ball bearing drawer slides on all drawers except 2" drawers. 6"x2" precision ball bearing casters made high tech thermoplastic rubber. Casters absorb vibrations transmitted to frame while movi...
  • Pilot Bearing Remover Ford T58L-101-B 1/2 to 3/8 Inch
    Pilot Bearing Remover Ford T58L-101-B 1/2 to 3/8 Inch
    Manufacturers Part #: 308-001
    Your Price: $172.13Includes Free Shipping
    Range: 1/2" to 3/8" Same as Ford p/n T58L-101-BApplications: Automatic Transaxle/Transmission -- TorqShift(R) : E-Series : 2010 Clutch : Escape : 2004 Clutch : Milan : 2011 Clutch : Milan Hybrid : 2011 Clutch : Milan : 2010 Clutch : Milan Hybrid : 2010 Automatic Transaxle/Transmission -- 4F27E : Transit Connect : 2011 Automatic Transaxle/Transmission -- 6R80 : Expedition : 2011 Automatic Transaxle/Transmission -- 6R80 : F-150 : 2011 Automatic Tr...

Current Reviews: 0