Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Engine Repair > Bearing - Bushing Pullers & Inst > Pilot Bearing Puller - 7/8 to 2 1/8

Pilot Bearing Puller - 7/8 to 2 1/8 In

Pilot Bearing Puller - 7/8 to 2 1/8 In
Pilot Bearing Puller - 7/8 to 2 1/8 In
  • Versatile puller built specially for inside pulling jobs, & particularly for removing flywheel pilot bearings on automobiles, trucks, & tractors.
  • Also very practical for pulling motor, generator, & magneto bearings.


  • I.D. Max. Spread2 1/8"
    I.D. Min. Spread7/8"
    Reach1"
    Weight4 lbs. 14 oz.
    • Shipping Weight: 4.14lbs
    • Manufactured by: OTC Tools and Equipment
    • Toolsource #: 62731
    • Manufacturers Part #: 1171
    • Also Known As: OTC-1171, OTC1171
    List Price: $73.00
    You save: $4.55
    $68.45

    Related Products

    • Front Hub Puller for 4WD Vehicles
      Front Hub Puller for 4WD Vehicles
      Manufacturers Part #: 7901
      Your Price: $88.32
      Front Hub Puller for 4WD Vehicles Needed to remove the front hub assembly when wheel bearing or brake rotor service is required. Services 3/4- and 1 -ton 4WD pickups with 8-bolt hubs: 1994 and newer Dodge Ram and 1988 and newer Chevrolet and GM. For maxi- mum pulling force, use OTC`s No. 7703 10-lb. slide hammer. Wt., 5 lbs. ...
    • Crankshaft Balancer Puller Adapter Set for GM
      Crankshaft Balancer Puller Adapter Set for GM
      Manufacturers Part #: 7911
      Your Price: $44.51
      Crankshaft Balancer Puller Adapter Set for GM Includes shulder bolts and spacer adapter. Wt., 8 oz. ...
    • Crankshaft Balancer Puller Kit for GM
      Crankshaft Balancer Puller Kit for GM
      Manufacturers Part #: 7912
      Your Price: $99.57Includes Free Shipping
      Everything you need to pull harmonic balancers with three tapped holes.The shoulder bolts are designed to prevent them from being installed too deply, protecting the crank sensor and/or interrupter rings from damage.The spacer adapter gives the puller`s forcing screw something to push against.The kit works on 1990 and newer 3300 and 3800 V-6 engines.Includes No. 518 Flange-type Puller and No. 7911 Adapter Set.The 7911 Adapter Set consists of the...
    • GM Steering Wheel Puller Legs
      GM Steering Wheel Puller Legs
      Manufacturers Part #: 7929A
      Your Price: $19.80
      Legs do the work of three separate Kent-Moore tools: J-42120, J-42578, and J-36541-A.GM eliminated the tapped holes in the steering wheel assembly on late model cars and vans, making these puller legs the only way to remove the wheel without damage. They`re used with OTC steering wheel puller No. 7245 or 7403 to get behind the steering wheel assembly to give a straight, even pull. Works on: Pontiac: 1988-93 Lemans; 1997-current Grand Prix, Tran...
    • Ford Vacuum Front Hub Release Tool Set w/ Puller
      Ford Vacuum Front Hub Release Tool Set w/ Puller
      Manufacturers Part #: 7932
      Your Price: $90.34
      Ford Vacuum Front Hub Release Tool Set For CV joint, ball joint, and wheel bearing sensor service, the only way to remove Ford`s new vacuum hub without breaking it is with this tool set. Hubs are plastic, standard removal tools simply will not pull them without damage. Removal clips slip into the slots on the hub to release the connection, puller contains the clips and hub for removal. Designed for 1998 and newer 4X4s with vacuum front hubs: Ra...
    • 8-Way Slide Hammer Puller Set
      8-Way Slide Hammer Puller Set
      Manufacturers Part #: 7947
      Your Price: $144.26Includes Free Shipping
      You can pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. Jaws can be set up for 2/3 way internal or external pulling jobs. Includes: Slide hammer with 5 lb. hammer, rear axle pulling attachment, 3-way cross-head, cone, 2-way cross-block, puller hook attachment, pulling jaws (3) for internal or external pulling jobs, grip wrench adapter with single lead (wrench not included) and a dent puller attachment.Also ...
    • 10-Way Slide Hammer Puller Set
      10-Way Slide Hammer Puller Set
      Manufacturers Part #: 7948
      Your Price: $264.69Includes Free Shipping
      You can pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. Jaws can be set up for 2/3 way internal or external pulling jobs. Includes: No. 1155 - Slide hammer w/5 lb. hammerNo. 7372 - Rear axle pulling attachmentNo. 24544 - 3-way cross headNo. 24545 - ConeNo. 27241 - 2-way cross blockNo. 27315 - Puller hook attachmentNo. 34698 - Pulling jaws (3) for internal or external pulling jobsNo. 205378 - Grip wrench ada...
    • Puller Adapter 5/8-18 Female To 1/4-20 Male
      Puller Adapter 5/8-18 Female To 1/4-20 Male
      Manufacturers Part #: 8000
      Your Price: $13.25
      Male-Female Threaded Adapters For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc. Female end 5/8" - 18, Male end 1/4" - 20, Length 2 1/4" ...
    • Puller Adapter 5/8-18 Female To 5/16-18 Male
      Puller Adapter 5/8-18 Female To 5/16-18 Male
      Manufacturers Part #: 8001
      Your Price: $12.75
      Male-Female Threaded Adapters For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc.Female end 5/8" - 18, Male end 5/16" - 18, Length 2 1/4" ...

    Customers Also Shopped For:


    Current Reviews: 0