Universal Sleeve Puller for Wet Type Sleeves
With 5 lb. slide hammer assembly.This tool does the job faster than ordinary sleeve pullers because setup time is slashed.Cone adjustment positions the puller jaws quickly, locking bar is tightened.To aid in breaking "frozen" sleeves loose, adjustable bridge is positioned on the cylinder block & the bearing mounted forcing nut is tightened.Bridge is removed & slide hammer assembly is attached.With a few sharp blows of the hammer, sleeve is pulled.In most cases, job time will average less than two minutes per cylinder.Special adapters are not needed!Adjustable jaws fit sleeves 3" to 6 1/2" in diameter.Weight: 20 lbs. 10 oz.
.jpg "Legacy Manufacturing"){kind=small}
Follow us on social media