Cordless Battery Powered Solder Iron

The Wall Lenk Cordless Battery Powered Solder Iron is a portable solution for soldering when electricity is not an option. This 15W iron uses 4 1.5V alkaline AA batteries (not included) and reaches a maximum temperature of 1050°F. It features a long life, iron-plated anti-corrosion tip and a built-in LED light to illuminate your work area.

Key Features:

• Develops maximum 1050°F tip temperature
• Reaches 365°F in about 7 seconds
• Operates for approximately 50 minutes of continuous use with fresh batteries
• Will complete approximately 160 solder joints with fresh batteries
• Has a long life, iron-plated anti-corrosion tip
• Lightweight - about 5 ounces with batteries (less than 3 ounces without)
• Built-in LED light illuminates work area

Applications:

This solder iron is ideal for a variety of applications, including:

• Fine Wiring - intricate soldering, printed circuit boards, marine wiring, CB's, ham radios, field service requests
• Electronics - TVs, radios, stereos, computers, games and toys
• Hobbies - model building, model railroads, radio control (r/c) models, slot and scale cars and jewelry making

Benefits:

• Portable - no electricity required
• Lightweight and compact
• Long battery life
• Durable construction
• Affordable

Instructions:

1. Insert 4 1.5V alkaline AA batteries (not included) into the battery compartment.
2. Turn the power switch to the "On" position.
3. Allow the iron to heat up for about 7 seconds.
4. Apply solder to the tip of the iron.
5. Touch the hot tip to the solder joint to melt the solder.
6. Once the solder has melted, remove the iron from the joint.
7. Turn the power switch to the "Off" position.

Cautions:

• Use carefully. The tip is extremely hot during use. Avoid contact with hands, skin and other objects.
• Use only in well ventilated areas.
• Hot irons can cause severe burns. Do not touch the heated tip or knurled nut.
• Not a toy. Store out of the reach of children.
• Always be sure the unit is cool before storing.
• Do not replace cap without switching unit off and ensuring tip has cooled.
• Do not attempt to readjust or repair. Unit is not user serviceable.
• When replacing batteries, replace all of the batteries with the correct type.
• Do not mix new batteries with used batteries or batteries of a different type.
• Be sure to insert batteries properly (+/-).
• Be sure to remove the batteries before storing the unit.