Precision 600A Inductive Amp-probe

Christie now offers a portable, inductive amp-probe. The amp-probe is designed to work in conjunction with Christie battery load testers for checking charging system / alternator current output.

The AP600 is accurate to 100 ma and has auto-ranging for 40A, 400A, and 600A. It can be used for measuring parasitic draw and for trouble-shooting various electrical problems. It also features Auto-Zero and Auto-Hold functions.

Operation is simple: Clamp it on, press the auto-zero button, and read the current measurement.

Charging System / Alternator test
The AP 600 is designed to be used with a Christie carbon pile battery load tester (CT 500 or CT 800) for complete charging system analysis.

600 Amp Auto Range Capacity
Three current measurement ranges are provided: 40A, 400A, and 600A. These ranges are automatically selected by the AP600. Operation is simple. Clamp it on, press the auto-zero button, and read the current measurement.

Precision Accuracy
The AP600 is accurate to 100 ma. It uses a 9 volt battery with typically 50 hours of expected life. Dimensions: 7.7" H x 2.8" W x 1.2" D.

Auto Zero
Christie's new amp-probe has a "auto-zero" button rather than a pot adjustment to expedite testing.

Protective Tether
The AP600 comes with a tether attached that can be fastened to a tester or tester stand so that the probe will not be misplaced or left under the hood of a vehicle being serviced.

Dimensions: