Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Motorcycle Tools > V-Twin Motorcycle Tools > Transmission Sta

Transmission Stand

Transmission Stand
Transmission Stand 1144

Use on all 5 & aftermarket
6-Speed transmissions.

JIMS USA Jims 1144 Transmission Stand
  • Manufactured by: JIMS USA
  • Toolsource #: 111204
  • Manufacturers Part #: 1144
  • Also Known As: JIM1144

Special Order
Contact For Details


Related Products

  • Breather Reamer Plate Assembly
    Breather Reamer Plate Assembly
    Manufacturers Part #: 1706M
    Your Price: $472.86Includes Free Shipping
    Breather Reamer Plate Assembly 1706M Repair a damaged breather hole with JIMS® Breather Reamer Tool. No need to disassemble the cases. Using JIMS® Reamer Tool will repair a damaged breather hole to use a .030” oversize breather gear (see breather gear section in this catalog), and repair a bad breather hole in less than an hours time (Note: all holes in breather bore will need to be cleared of all chips). Jims USA Jim  1706M&nb...
  • Bike Center Jack
    Bike Center Jack
    Manufacturers Part #: 904
    Your Price: $353.50Includes Free Shipping
    Bike Center Jack 904 This scissors type jack can lift either the front or rear of most motorcycles to perform wheel assembly service work. Order non-skid rubber pad separately for mounting to top of jack surface. Use with JIMS® alignment tool No.964. JIMS USA JIM 904 Bike Center Jack ...
  • Cam Gear Alignment Tool
    Cam Gear Alignment Tool
    Manufacturers Part #: 1290
    Your Price: $255.62Includes Free Shipping
    Cam Gear Alignment Tool 1290 Use on all Single Cam 1970-99. Use No. 1390 to remove cam gear. This tool is designed to index the cam gear’s position while removing or installing the cam gear. This tool will allow you to accurately position and or reposition the cam gear from one camshaft to another, as well as allow you to retard or advance the gear’s position by up to 10 degrees with the accuracy of a 1/4 degree. See 1290-IS for instr...
  • Cam Bushing Reamer Tool
    Cam Bushing Reamer Tool
    Manufacturers Part #: 1023-70
    Your Price: $235.74Includes Free Shipping
    Cam Bushing Reamer Tool 1023-70 Use on all Big Twin 1970-present single cam only. (Note: Includes aftermarket motors.) Use to line ream cam cover bushing to size from inner cam bearing, for a true centerline between the two dimensions. Finish size will be about .0008”-.0015” over the cam journal. Instruction sheet No.1023-IS. JIMS USA JIM  1023-70 Cam Bushing Reamer Tool ...
  • Big Twin Timken Bearing Remover
    Big Twin Timken Bearing Remover
    Manufacturers Part #: 1709
    Your Price: $197.47Includes Free Shipping
    Big Twin Timken Bearing Remover 1709 Use on all Big Twin 1955-02. (Note: Includes JIMS® Twin Cam®.) This tool will remove the sprocket shaft Timken® bearing on late Big Twins, 1986-present, with an integral sprocket shaft. A specialized tool that does the job better than anything else on the market. JIMS USA JIM 1709 Big Twin Timken Bearing Remover ...
  • Cam Cover Bushing Remover
    Cam Cover Bushing Remover
    Manufacturers Part #: 2281
    Your Price: $140.03Includes Free Shipping
    Cam Cover Bushing Remover 2281 Use on all Big Twin 1936-69. Use this tool to remove the cam cover bushing. This sturdy and reliable tool will remove the cam cover & cam bushing in one easy operation. Will also remove cam bushing in case. Jims USA JIM 2281 Cam Cover Bushing Remover ...

Customers Also Shopped For:

Current Reviews: 0