Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Motorcycle Tools > V-Twin Motorcycle Tools > Cam Bushing Reamer To

Cam Bushing Reamer Tool

Cam Bushing Reamer Tool
Cam Bushing Reamer Tool 1023-70

Use on all Big Twin 1970-present single
cam only. (Note: Includes aftermarket
motors.)

Use to line ream cam cover bushing to size from inner
cam bearing, for a true centerline between the two
dimensions. Finish size will be about .0008”-.0015”
over the cam journal. Instruction sheet No.1023-IS.

JIMS USA JIM  1023-70 Cam Bushing Reamer Tool
  • Manufactured by: JIMS USA
  • Toolsource #: 111154
  • Manufacturers Part #: 1023-70
  • Also Known As: JIM1023-70

Only 2 left in stock - order soon

$235.74

Frequently bought together:

  • Add this item to your cart and save $19.94 when purchased with the product above.
    Discount applied at checkout.

Related Products

  • Cam Shaft Remover & Installer
    Cam Shaft Remover & Installer
    Manufacturers Part #: 1277
    Your Price: $150.25Includes Free Shipping
    This item is on backorder until at least April 1, 2009. This multi-function tool will remove and replace front and rear camshafts and the ball bearings in the new Twin Cam 88(R).It provides the precision alignment of the camshaft to ensure a smooth press in and out of the support plate. No. 1277 Applications: Use on all Twin Cam(R) 1999 to early 2000 to remove & install cams & bearings.Use on all Late 2000-06 FXST, FL & Late 2000-05 FXD to remov...
  • FL Power Train Alignment Tool
    FL Power Train Alignment Tool
    Manufacturers Part #: 964
    Your Price: $609.58Includes Free Shipping
    FL Power Train Alignment Tool 964 Use on 1993-2008 FLHT models. This tool easily and safely aligns the Power Train (rubber mounted engine, transmission and the swingarm assembly) to the correct position as found on most touring models. Alignment service must be performed when the engine, transmission, or swingarm has either been removed or repaired. The safety in handling and performance of the motorcycle could be greatly effected without the acc...
  • Cylinder Torque Plate Kits
    Cylinder Torque Plate Kits
    Manufacturers Part #: 1073
    Your Price: $379.57Includes Free Shipping
    Cylinder Torque Plate Kits 1073 Late model aluminum cylinders cannot be accurately honed without using torque plates. These plates simulate operating stress conditions when boring or honing aluminiun cylinders. These plates easily adapt to conventional boring bars or a Sunnen type honing machine. The JIMS® torque plates are drilled precisely for multiple applications use, and can accommodate various bore sizes, with stock or oversize big bore...
  • Cylinder Guide Assembly
    Cylinder Guide Assembly
    Manufacturers Part #: 1000A
    Your Price: $350.93Includes Free Shipping
    Cylinder Guide Assembly 1000A Use on Big Twin 1984-1999 single cam only. (Note: Includes aftermarket engines.) Use on Sportster 1986-1999, & Buell ® 1987-present, except 1125R. Use to repair stripped damaged cylinder base threads up to a 4” bore, in engine case. This tool will hold centerline and squareness to where the factory intended them to be. All this with the engine still in the frame using an angle head drill (drill not incl...
  • Compression Release Valve Tool
    Compression Release Valve Tool
    Manufacturers Part #: 1169
    Your Price: $329.72Includes Free Shipping
    Compression Release Valve Tool 1169 Use on all Twin Cam® “A” or “B” models Use this tool for machining all Twin Cam® heads 1999 and later, for preparing heads to install JIMS® No.727K compression release valves. Install on the front or rear head, with or without the valves installed. Simply drill, spot face, tap and install compression release valves No.727K. JIMS USA JIM 1169 Compression Release Valv...
  • Cam Gear Alignment Tool
    Cam Gear Alignment Tool
    Manufacturers Part #: 1290
    Your Price: $255.62Includes Free Shipping
    Cam Gear Alignment Tool 1290 Use on all Single Cam 1970-99. Use No. 1390 to remove cam gear. This tool is designed to index the cam gear’s position while removing or installing the cam gear. This tool will allow you to accurately position and or reposition the cam gear from one camshaft to another, as well as allow you to retard or advance the gear’s position by up to 10 degrees with the accuracy of a 1/4 degree. See 1290-IS for instr...

Customers Also Purchased:

Customers Also Shopped For:

  • Cam Bearing Tool
    Cam Bearing Tool
    Manufacturers Part #: 97272-60
    Your Price: $56.69
    Cam Bearing Tool 97272-60 Use on all Big Twin 1958-present single cam only. (Note: Includes aftermarket motors.) Use to install inner cam bearing, with Handle No. 33416-80 (Handle slips through the outer cam bushing for alignment). Instruction Sheet No.97272-IS. All of J I M S ® b e a r i n g installers are designed with an angle to apply all the pushing force to the extreme outer diameter of the bearing. JIMS USA JIM 97272-60 Cam Bearin...
  • Remover / Installer - Camshaft, Rocker Arm
    Remover / Installer - Camshaft, Rocker Arm
    Manufacturers Part #: 8516A
    Your Price: $92.30
    This special rocker arm remover must be used to allow removal of the camshaft, rocker arms, and hydraulic las adjusters in 4.7 Liter engines.Supersedes 8516.1999 to current. Manufacturer drop ship; please email service@toolsource.com for lead time. OTC Miller Special Tools 8516A Camshaft, Rocker Arm Remover/Installer ...
  • FL Power Train Alignment Tool
    FL Power Train Alignment Tool
    Manufacturers Part #: 964
    Your Price: $609.58Includes Free Shipping
    FL Power Train Alignment Tool 964 Use on 1993-2008 FLHT models. This tool easily and safely aligns the Power Train (rubber mounted engine, transmission and the swingarm assembly) to the correct position as found on most touring models. Alignment service must be performed when the engine, transmission, or swingarm has either been removed or repaired. The safety in handling and performance of the motorcycle could be greatly effected without the acc...
  • 1/2" Drive 15/16" 8-Point Deep Length Impact Socket
    1/2" Drive 15/16" 8-Point Deep Length Impact Socket
    Manufacturers Part #: J7330S
    Your Price: $16.03
    J7330S - 1/2" Drive 15/16" 8-Point Deep Length Impact Socket Features and Benefits This Deep Length Socket has a socket size of 15/16" 3-1/2" length 1/2" Drive size 8 Point Concentric openings Large clearance holes Tight nut end tolerances Made from high alloy steel for greater strength Specially heat treated for the correct balance of strength and durability Product Details Weight 1.33 lbs Bolt Clea...
  • Cylinder Torque Plate Kits
    Cylinder Torque Plate Kits
    Manufacturers Part #: 1073
    Your Price: $379.57Includes Free Shipping
    Cylinder Torque Plate Kits 1073 Late model aluminum cylinders cannot be accurately honed without using torque plates. These plates simulate operating stress conditions when boring or honing aluminiun cylinders. These plates easily adapt to conventional boring bars or a Sunnen type honing machine. The JIMS® torque plates are drilled precisely for multiple applications use, and can accommodate various bore sizes, with stock or oversize big bore...
  • Cylinder Guide Assembly
    Cylinder Guide Assembly
    Manufacturers Part #: 1000A
    Your Price: $350.93Includes Free Shipping
    Cylinder Guide Assembly 1000A Use on Big Twin 1984-1999 single cam only. (Note: Includes aftermarket engines.) Use on Sportster 1986-1999, & Buell ® 1987-present, except 1125R. Use to repair stripped damaged cylinder base threads up to a 4” bore, in engine case. This tool will hold centerline and squareness to where the factory intended them to be. All this with the engine still in the frame using an angle head drill (drill not incl...

Current Reviews: 0