Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Motorcycle Tools > V-Twin Motorcycle Tools > 3/8" Valve Guide Pusher S

3/8" Valve Guide Pusher Set

3/8\" Valve Guide Pusher Set
3/8” Valve Guide Pusher Set 1054

Use on 3/8” I.D. guides.

This kit lets you push the valve guide into H-D® and
aftermarket heads rather than drive it in with a hammer.

JIMS USA JIM  1054 Valve Guide Pusher Set
  • Manufactured by: JIMS USA
  • Toolsource #: 111167
  • Manufacturers Part #: 1054
  • Also Known As: JIM1054

$162.80
This product has been discontinued

Related Products

  • Cam Shaft Remover & Installer
    Cam Shaft Remover & Installer
    Manufacturers Part #: 1277
    Your Price: $150.25Includes Free Shipping
    This item is on backorder until at least April 1, 2009. This multi-function tool will remove and replace front and rear camshafts and the ball bearings in the new Twin Cam 88(R).It provides the precision alignment of the camshaft to ensure a smooth press in and out of the support plate. No. 1277 Applications: Use on all Twin Cam(R) 1999 to early 2000 to remove & install cams & bearings.Use on all Late 2000-06 FXST, FL & Late 2000-05 FXD to remov...
  • Breather Reamer Plate Assembly
    Breather Reamer Plate Assembly
    Manufacturers Part #: 1706M
    Your Price: $472.86Includes Free Shipping
    Breather Reamer Plate Assembly 1706M Repair a damaged breather hole with JIMS® Breather Reamer Tool. No need to disassemble the cases. Using JIMS® Reamer Tool will repair a damaged breather hole to use a .030” oversize breather gear (see breather gear section in this catalog), and repair a bad breather hole in less than an hours time (Note: all holes in breather bore will need to be cleared of all chips). Jims USA Jim  1706M&nb...
  • Compression Release Valve Tool
    Compression Release Valve Tool
    Manufacturers Part #: 1169
    Your Price: $329.72Includes Free Shipping
    Compression Release Valve Tool 1169 Use on all Twin Cam® “A” or “B” models Use this tool for machining all Twin Cam® heads 1999 and later, for preparing heads to install JIMS® No.727K compression release valves. Install on the front or rear head, with or without the valves installed. Simply drill, spot face, tap and install compression release valves No.727K. JIMS USA JIM 1169 Compression Release Valv...
  • Clutch Assembly Service Tool For Big Twins
    Clutch Assembly Service Tool For Big Twins
    Manufacturers Part #: 971
    Your Price: $291.43Includes Free Shipping
    Clutch Assembly Service Tool For Big Twins 971 Use on all Big Twins 1990-present. This tool will safely disassemble and assemble the clutch shell assembly. Easily removes and installs the clutch hub from it's bearing. Safely removes and installs the clutch shell ball bearing (H-D® No.37906- 90) without any damage to the new bearing. This is done by pushing on the outer perimeter of bearing. JIMS USA JIM 971 Clutch Assembly Service T...
  • Cam Gear Alignment Tool
    Cam Gear Alignment Tool
    Manufacturers Part #: 1290
    Your Price: $255.62Includes Free Shipping
    Cam Gear Alignment Tool 1290 Use on all Single Cam 1970-99. Use No. 1390 to remove cam gear. This tool is designed to index the cam gear’s position while removing or installing the cam gear. This tool will allow you to accurately position and or reposition the cam gear from one camshaft to another, as well as allow you to retard or advance the gear’s position by up to 10 degrees with the accuracy of a 1/4 degree. See 1290-IS for instr...
  • Cam Bushing Reamer Tool
    Cam Bushing Reamer Tool
    Manufacturers Part #: 1023-70
    Your Price: $235.74Includes Free Shipping
    Cam Bushing Reamer Tool 1023-70 Use on all Big Twin 1970-present single cam only. (Note: Includes aftermarket motors.) Use to line ream cam cover bushing to size from inner cam bearing, for a true centerline between the two dimensions. Finish size will be about .0008”-.0015” over the cam journal. Instruction sheet No.1023-IS. JIMS USA JIM  1023-70 Cam Bushing Reamer Tool ...

Customers Also Shopped For:

  • Pinion Gear Locking Tool
    Pinion Gear Locking Tool
    Manufacturers Part #: 1665
    Your Price: $39.17
    Use to lock pinion gear, necessary to torque the pinion nut Tool is simple to use, just align underneath gear and screw into case JIMS USA 1665 Pinion Gear Locking Tool JIM1665...
  • 3/8 Inch Low Profile Jiffy-Tite Disconnect
    3/8 Inch Low Profile Jiffy-Tite Disconnect
    Manufacturers Part #: 22930
    Your Price: $12.30
    Low-profile design quickly and easily disengages Jiffy-tite quick-connect fittings without removal of the clip. Teeth of the tool fit perfectly into tight tolerance of Jiffy-tite connectors and when rotated allow the line to be pulled without damage to the connector or retaining clip so they can be reused. Tool fits the most popular Jiffy-tite fittings used in newer GM vehicles, many newer Daimler Chrysler and some newer Mercedes vehicles. Fittin...
  • Compression Release Valve Tool
    Compression Release Valve Tool
    Manufacturers Part #: 1169
    Your Price: $329.72Includes Free Shipping
    Compression Release Valve Tool 1169 Use on all Twin Cam® “A” or “B” models Use this tool for machining all Twin Cam® heads 1999 and later, for preparing heads to install JIMS® No.727K compression release valves. Install on the front or rear head, with or without the valves installed. Simply drill, spot face, tap and install compression release valves No.727K. JIMS USA JIM 1169 Compression Release Valv...
  • Cutter Bodies - Valve Guide O.D. Machining Tools - .500
    Cutter Bodies - Valve Guide O.D. Machining Tools - .500
    Manufacturers Part #: KL1438A
    *this item has been discontinued
    For All Press-on Valve Stem Seals Carbide tipped cutters accurately machine O.D., face and chamfer top of guide in minutes. Hardened and ground pilots fit any 3/8” or 1/2” electric drill. Cutter bodies and pilots available as complete assemblies or may be ordered separately. All bodies and pilots are interchangeable. Use pilots with electric hand drill only. Size : .500...
  • 5/16" Valve Guide Pusher Set
    5/16" Valve Guide Pusher Set
    Manufacturers Part #: 1058
    *this item has been discontinued
    5/16” Valve Guide Pusher Set 1058 Use on 5/16” I.D. guides. This kit lets you push the valve guide into H-D® and aftermarket heads rather than drive it in with a hammer. JIMS USA JIM 1058 5/16” Valve Guide Pusher Set ...
  • (CleverBlock) Bushing Assembly Rear Swing Arm Assembly Tool
    (CleverBlock) Bushing Assembly Rear Swing Arm Assembly Tool
    Manufacturers Part #: 1743
    Your Price: $190.25Includes Free Shipping
    (CleverBlock) Bushing Assembly Rear Swing Arm Assembly Tool 1743 Use on all FLT, FLH 1980-2001. Use on all FXR 1982-94, 1999 and all aftermarket FXR style frames. Use to remove and replace swing arm cleveblocks. Cleveblocks, part No.47556-81, are silicone filled bushings that will be damaged if not installed properly. JIMS® tool presses on the outer sleeve of the bushing, preventing damage to the cleveblock. Can be used with or without a pres...

Current Reviews: 0