3/8 In. Drive SAE Crowfoot Wrenches
A crowfoot wrench is a wrench head with a square drive hole, made to be turned by a ratchet, extension or torque wrench. It reaches nuts and fittings that a socket cannot slip over, such as line fittings and hose nuts, and fasteners tucked behind other parts. This category holds individual 3/8 in. drive crowfoot wrenches in SAE (fractional inch) sizes, in open end and flare nut styles. Auto repair, diesel, hydraulics, aviation and industrial maintenance technicians use them on brake, fuel, power steering, A/C and hydraulic lines.
Open end or flare nut
An open end crowfoot slides onto a nut from the side, like an open end wrench, and is quick to place. A flare nut crowfoot has a 6 or 12 point box with a narrow opening, so it slips over the tube and then grips more sides of the nut. That extra grip helps keep soft tubing nuts from rounding off, which makes the flare nut style the better choice for brake and fuel lines.
Using a crowfoot with a torque wrench
Because the crowfoot head extends past the end of the torque wrench, it changes the effective length of the tool. When the crowfoot is set at a right angle to the torque wrench handle, the reading stays the same. When it is set in line, the torque wrench reading must be corrected using the crowfoot length, or the fastener ends up over-tightened. Many technicians set the crowfoot at a right angle to avoid the calculation.
Choosing sizes
Individual crowfoots let a shop add a single size needed for a job or replace a lost one. SAE sizes match the fractional inch fittings on many domestic vehicles, trucks and hydraulic systems. Sizes run from small line nuts up to large open end heads, so check the fitting size before ordering.
Brands we carry here include Williams, Proto, K Tool, V8 Tools, Martin and SK. Larger drive sizes are in the sibling 1/2 in. drive individual SAE crowfoot category.





































Follow us on social media