Wire Strippers and Crimpers
Clean electrical repairs start with stripping the right length of insulation without nicking the copper underneath, then crimping a terminal or splice so it holds and conducts well. This category holds hand wire strippers, precision and self-adjusting insulation strippers, in-line strippers and combination tools that strip, cut and crimp, including compact mini crimpers. Auto repair and diesel technicians working on harnesses and lighting, electricians, industrial maintenance crews, marine and RV techs and DIY users all use them.
Choosing the right type
Gauge-hole strippers have notches marked for wire sizes. Place the wire in the matching notch, close the tool and pull, and the blades cut only the insulation. Self-adjusting strippers grip the wire and remove the insulation in a single squeeze, which is quick when you strip many wires of different sizes. In-line strippers can open insulation in the middle of a wire for a tap or splice. Combination stripper crimpers add crimping dies for insulated and non-insulated terminals, a cutter and often bolt-cutting holes for trimming small screws.
Getting good results
Use the notch that matches the wire size, not a smaller one, or you will cut strands and weaken the conductor. Strip only as much as the terminal needs, then crimp in the die marked for that terminal type. Give the crimp a light pull to check it. Seal the joint with heat shrink tubing where it will see moisture or vibration, and route the repaired wire so it cannot rub on sharp edges. A good stripper pays for itself in fewer redone splices. For ratcheting crimpers and terminal kits, see Wire Crimping Tools and Kits under Automotive Electrical Systems, and for cutting heavy cable see Cable Cutters under Pliers.
Brands we carry here include Knipex, Milwaukee, Klein, S&G Tool Aid, OTC and Channellock.








































Follow us on social media