Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Misc > GM V-6 Harmonic Balancer Puller K

GM V-6 Harmonic Balancer Puller Kit

GM V-6 Harmonic Balancer Puller Kit

Features and Benefits

  • Remove Harmonic Balancer on 3.6L Chevrolet Camaro
  • Specially designed jaw tips fit small puller pockets found on the back of the pulley
  • Puller kit includes 4 pressure bolt push rods
  • Puller geometry increases jaw bight as puller is tightened
  • Compact design fits in tight engine compartments

Standard wide jaw harmonic pullers will not grip the back side of the harmonic balancer pulley found on 3.6L Chevrolet Camaro V-6 engines because the jaw tips are too wide. The 13350 puller jaw tips are specially designed to grip small pockets found on the back side of the pulley.  Puller geometry increases the jaw bight as the pressure screw is tightened. Compact design allows puller to be used in engine configurations with limited access. Four (4) pressure bolt push rods are provided for different applications.

 

  • Shipping Weight: 3lbs
  • Manufactured by: Schley Products, Inc
  • Toolsource #: 217566
  • Manufacturers Part #: 13350
  • Also Known As: SCH13350, SLY-13350

Only 9 left in stock - order soon

Inventory available from other suppliers, prices may be different

List Price: $110.95
You save: $16.46
$94.49

Customers Also Shopped For:

  • Flange Type Puller Set
    Flange Type Puller Set
    Manufacturers Part #: 7790
    Your Price: $99.89Includes Free Shipping
    A versatile puller capable of removing a wide variety of components having tapped pulling holes, including harmonic balancers & timing gears.Furnished cap screws can be positioned to handle bolt circle diameters from 1 1/2" to 4 5/8".A plastic storage tray w/ cover helps keep set components organized for easy selection.Weight: 6 lbs. 10 oz. Includes Three Each of the Following Cap Screw Sizes: 1/4"-28 x 3" lb.3/8"-24 x 1 1/2" lg.3/8"-16 x 2" lg.3...
  • GM Upper Control Arm Knockout Punch Tool
    GM Upper Control Arm Knockout Punch Tool
    Manufacturers Part #: 74910
    Your Price: $54.46
    A necessary tool for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. The center punch is for 1988 - 1997 GM vehicles and the offset punch is for 1998 and up GM vehicles and some 1996 and 1997 GM vehicles. APPLICATIONS: Chevrolet/GM: 1989 - 99 2WD/4WD C & K Series 1/2, 3/4, 1 ton trucks, 1991 & up AWD Astro Vans and AWD Safari Vans. Specialty Products 74910 GM Upper Control Arm Knockout Punc...
  • CRP123 PRO CREADER
    CRP123 PRO CREADER
    Manufacturers Part #: 301050116
    The CRP123 blurs the lines between a code scanner and a professional mid-line scan tool. With features far beyond the typical Read & Clear codes, the CRP123 takes you to a new level of diagnostics with added capabilities such as Enhanced Data Stream for ABS, SRS, Transmission and Engine. The CRP123 is the only true full coverage ABS, SRS, Transmission and Engine Code Scanner - not leaving you behind with coverage for only a few makes and models. ...
  • ONYX Pistol Grip Punch/ Flange Tool with 5.5mm Punch
    ONYX Pistol Grip Punch/ Flange Tool with 5.5mm Punch
    Manufacturers Part #: 605PT
    Your Price: $66.14
    Features: Punch designed for easy replacement Performs hole punching and panel crimping Features a rotating head for convenient use Every pull of the lever delivers a single punch or a single flange crimp with precision control Forms an offset crimped edge on sheet metals for no-bump lap welds Lightweight Durable construction Reduces metal fabrication time in half Specifications: Punch Diameter: 5.5mm (7/32")Punch Capacity: 1.6mm (1/16")Crimping...
  • Camaro 3.6L Haronic Damper
    Camaro 3.6L Haronic Damper
    Manufacturers Part #: 13350
    Your Price: $74.28
    Features narrow jaw tips designed to fit 3.6L V-6 Camaro damper pulleys with narrow puller jaw contact pads found on the backside of the damper. Standard puller jaws are too wide to properly contact damper puller pads. Schley Products puller geometry increases pressure on jaw tips as puller is tightened. Compact puller design allows puller to be used in limited access applications. Kit includes 4 crankshaft pressure rods....

Current Reviews: 0