Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Engine Repair > Harmonic Balancer Tools > GM Harmonic Damper Holding To

GM Harmonic Damper Holding Tool

GM Harmonic Damper Holding Tool
This harmonic damper pulley holding tool was developed to aid in the removal and installation of the crank bolt. The bolts holding these pulleys are extremely tight and without the #64700, removal is extremely difficult at best. In replacing the center bolt after installation of the pulley, factory specifications require up to 240 pounds of torque to seat the pulley properly. Refer to factory specifications for specific requirements. These tools allow the factory torque to be attained.
  • 1999 and later GEN III
  • 4.8L V-8, 5.3L V-8 and 6.0L V-8
  • trucks and SUV's.
Schley Products SP Tools 64700 G.M. Harmonic Damper Holding Tool
  • Shipping Weight: 1.6lbs
  • Manufactured by: Schley Products, Inc
  • Toolsource #: 104462
  • Manufacturers Part #: 64700
  • Also Known As: SCH64700, SL64700, SLY-64700

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

$33.45

Related Products

  • GM Harmonic Damper Holding Tool
    GM Harmonic Damper Holding Tool
    Manufacturers Part #: 64500
    Your Price: $33.45
    Services both trucks and SUVs by delivering faster crank bolt removals and installations on 4.2, 3.5 and 2.8-liter in-line GM engines.The tool simply holds the pulley stationary in order to remove the center bolt.In replacing the center bolt after installation of the pulley, factory specifications require up to 240 pounds of torque to seat the pulley properly. Refer to factory specificaitons for specific requirements. Applications: 4.2L Straight ...

Customers Also Purchased:

  • GM Harmonic Damper Holding Tool
    GM Harmonic Damper Holding Tool
    Manufacturers Part #: 64500
    Your Price: $33.45
    Services both trucks and SUVs by delivering faster crank bolt removals and installations on 4.2, 3.5 and 2.8-liter in-line GM engines.The tool simply holds the pulley stationary in order to remove the center bolt.In replacing the center bolt after installation of the pulley, factory specifications require up to 240 pounds of torque to seat the pulley properly. Refer to factory specificaitons for specific requirements. Applications: 4.2L Straight ...
  • Harmonic Damper Pulley Puller Update Kit
    Harmonic Damper Pulley Puller Update Kit
    Manufacturers Part #: 13451
    Your Price: $39.67
    Features and Benefits Update Schley #64900, 64900A & 13350 Harmonic Damper Puller Kits Jaw Kit fits Dodge / Chrysler 2009 to current 5.7 L V8 & 1995 to 2009 3.5L V6 engines Jaws are thiner and wider to fit through narrow damper access windows Jaws are offset to provide proper pulling alignment with damper pulling pads Kit includes: 3 puller legs & 6 spring washers Harmonic damper pulley webbing found on these applications is narrow, ...
  • Steering Column Lock Plate Compressor Adapter
    Steering Column Lock Plate Compressor Adapter
    Manufacturers Part #: J-42137
    Your Price: $37.05
    Steering Column Lock Plate Compressor Adapter J-42137 Applications: H2   '97 W, Y, N The vehicles listed above will feature a cam orientation plate in place of the steering column shaft lock. This orientation plate must be compressed to gain access to the retaining ring when steering column disassembly is required. Used with: J 23653-SIR   Kent-Moore J-42137 Steering Column Lock Plate Compressor Adapter  ...
  • Harmonic Damper Pulley Puller Update Kit
    Harmonic Damper Pulley Puller Update Kit
    Manufacturers Part #: 13351
    Your Price: $43.25
    Features and Benefits: Update Schley #64900, 64900A & 13450 Harmonic Damper Puller Kits 13351 Jaw Kit fits Chevrolet 3.6L V6 engines Jaw Tips are designed to fit the 3.6L narrow damper pulley contact pockets Kit includes 3 puller legs & 6 spring washers Replacement Jaw Kit for 13350 puller kit The 13351 harmonic damper pulley puller jaw update kit provides necessary components to expand existing Schley puller kits #64900, #64900A & #...
  • Fuel Injection/Ignition Coil Test Adapter
    Fuel Injection/Ignition Coil Test Adapter
    Manufacturers Part #: 391
    Your Price: $11.81
    Used on GM, Ford, AMC, Chrysler, and most import electronic fuel injection systems.Provides access point for EFI components using Bosch style connector.Components that can be tested include: fuel injectors,thermal time switch, cold start injector, temperature sending unit, coolant temperature sending unit, and auxiliary air valve.Tests that can be made include resistance, voltage drop, current, pulse width, and scope pattern. Connects between com...
  • 3/8 Inch Drive Oil Filter Wrench 90mm 15 Flats
    3/8 Inch Drive Oil Filter Wrench 90mm 15 Flats
    Manufacturers Part #: JA19015
    90mm, 15 Flats with 3/8" Drive Applicable to: Jaguar: 2010 and Newer 5.0L V8 Engines in the XJ, XJL, XK, XKR, XF, XFR and XKR.Land Rover: 2010 and Newer 5.0L V8 Engines in the LR4, Ranger Rover and Range Rover Sport. Assenmacher Specialty Tools AST JA 19015 3/8" Drive Oil Filter Wrench ...

Customers Also Shopped For:

  • Harmonic Balancer Holding Tool
    Harmonic Balancer Holding Tool
    Manufacturers Part #: 6495
    Your Price: $84.70
    Designed as a holding ring with three pins to fit into the harmonic balancer openings.Use with 1/2" ratchet or breaker bar to hold the harmonic balancer in place when turning the bolt that holds the balancer to the crankshaft.Works on 1990-newer 3.3L V-6 vans; 1994-newer 3.8L V-6; 1993-1997 3.3L & 3.5L V-6 cars; 1998-newer 2.7L, 3.2L, and 3.5L V-6 cars. OTC 6495 Harmonic Balancer Holding Tool ...
  • GM Harmonic Damper Holding Tool
    GM Harmonic Damper Holding Tool
    Manufacturers Part #: 64500
    Your Price: $33.45
    Services both trucks and SUVs by delivering faster crank bolt removals and installations on 4.2, 3.5 and 2.8-liter in-line GM engines.The tool simply holds the pulley stationary in order to remove the center bolt.In replacing the center bolt after installation of the pulley, factory specifications require up to 240 pounds of torque to seat the pulley properly. Refer to factory specificaitons for specific requirements. Applications: 4.2L Straight ...
  • BUY 13095, 32027, 67012 GET 28650 FREE
    BUY 13095, 32027, 67012 GET 28650 FREE
    Manufacturers Part #: 81368
    Your Price: $276.33Includes Free Shipping
    Features & Benefits: Buy 13095 (6PC Progrip hook & pick set) 32027 (5PC Pneu body & panel tool set) & 67012 (12PC Brass punch & scraper kit) and get 28650 (Hose Clamp Pliers) for FREE!   13095- Used for a wide variety of applications, such as automotive and electrical work in confined spaces, scribing lines, O-ring and cotter pin removal, and to break radiator connections. Made of larger shank st...
  • Alignment Die Module SAE No. 4 to 1/2 Inch
    Alignment Die Module SAE No. 4 to 1/2 Inch
    Manufacturers Part #: 4935058
    Your Price: $65.35
    SAE Alignment Dies - No. 4 to 1/2" with NC & NF thread Pitches This set has the new Self Alignment feature which gives you less chance of cross threading The self alignment feature gives you greater thread quality, accuracy, and cutting ease The set includes No. 4 to 1/2" in both NC and NF thread pitches Also includes Pipe Taper Die size 1/8" - 27 NPT Made in the USA Irwin Hanson 4935058 SAE Alignment Die Module ...
  • Blue Charging Hose for R-134a - 96 In
    Blue Charging Hose for R-134a - 96 In
    Manufacturers Part #: 62121
    Your Price: $36.22
    Supercedes Robinair p/n 62096. 14mm x 1/2" Acme. 1/4" Enviro-Guard™ for Automotive R-134a. Meets all specifications for low permeation construction. 740 psi working pressure, 3700 psi burst pressure. Robinair 62121 Blue Charging Hose For R-134a - 96 In ...
  • Cam Sprocket Timing Wrench
    Cam Sprocket Timing Wrench
    Manufacturers Part #: J-36013
    Your Price: $156.42Includes Free Shipping
    Cam Sprocket Timing Wrench J-36013 Tool Number: J-36013 Tool Name: CAM SPROCKET TIMING WRENCH Applications: QUAD 4 2.4L, J, N J 36013 is designed to hold the camshaft sprockets while removing and installing the camshaft bolts. Kent- Moore KM J-36013 Cam Sprocket Timing Wrench ...

Current Reviews: 0