3/8 In Dr Super Torx(R) Bit Socket - T-47

3/8" Dr Super Torx(R) Bit Socket - T47

Picture is of the Lisle 37600 Super Torx(R) Bit Socket Set

Shipping Weight: 0.15lbs
Manufactured by: Lisle
Toolsource #: 67996
Manufacturers Part #: 37690
Also Known As: LI37690, LIS-37690, LIS37690, LS37690

Special Order
Contact For Details

Write Review

$4.79

This product has been discontinued

Customers Also Purchased:

4 Wheel Drive Spindle Puller - 1 1/2 In, 1 5/8 In, 2 In

Manufacturers Part #: 22200
Your Price: $52.88
4 Wheel Drive Spindle Puller - 1 1/2", 1 5/8", 2" Features: Fits all common 4 wheel drive pick-up spindles.Stepped design fits 1 1/2", 1 5/8" & 2" spindles.Use w/ either a 1/2" - 20 or 5/8" - 18 slide hammer.Boxed.Shipping weight 3 lbs. ...
Add to Cart Details
Hook & Pick Set - 5-Pc

Manufacturers Part #: 3121
Your Price: $11.29
KD Tools 3121 Features: Use picks to pull O-rings, seals, cotter pins and brushes quickly and easily.Includes heat-treated, high-carbon sttel picks: O-ring, 90?, straight and hook.Includes 5" aluminum handle knurled for a sure grip. KD Tools 3121 5-Piece Hook & Pick Set ...
Add to Cart Details
Inch Coarse Thread Repair Kit - 1/4-20 x .375

Manufacturers Part #: 5521-4
Your Price: $17.36
Tap Part No. - 819-4Installation Tool Part No. - 5288-4Tool Type - 1Insert Package Part No. - R1185-4Drill Size - 17/64" (Drill bit not included.)12 Inserts Per Kit Heli Coil 5521-4 Inch Coarse Thread Repair Kit - Thread Size 1/4-20 x .375 Length ...
Add to Cart Details
Metric Fine Thread Repair Kit - M14x1.5 x 21.0mm

Manufacturers Part #: 5544-14
Your Price: $55.26
Tap Part No. - 4976-14Installation Tool Part No. - 4973-14Tool Type - 3Insert Package Part No. - R3745-14Drill Size - 9/16" (Drill bit not included.)6 Inserts Per Kit Heli Coil 5544-14 Metric Fine Thread Repair Kit - Thread Size M14x1.5 x 21.0mm Length ...
Add to Cart Details
Insert 7/16-20 - 6/Pk

Manufacturers Part #: R1191-7
Your Price: $4.38
Insert 7/16-20 - 6/Pk. Heli-Coil Inserts are packaged according to thread size for easy handling and display. The insets are contained in a sturdy, clear, plastic display box and marked with part number and thread size. The length of the inserts in inch and metric packages is 1-1/2 times the diameter of the bolt. ...
Add to Cart Details
Clutch Pilot Bushing Remover

Manufacturers Part #: 55600
Your Price: $9.69
Uses Hydraulic Pressure to Remove Brass and Bronze Bushings Screw the self-tapping tip 2-3 threads into the brass or bronze bushing, then pump out the bushing with a grease gun!Fits brass or bronze bushings from 1/2" to 3/4" I.D.Not for use on steel bearings.Made of case hardened steel. Lisle 55600 Clutch Pilot Bushing Remover ...
Add to Cart Details

Customers Also Shopped For:

1/2 In Drive 12 Pt Deep Metric Socket - 28mm

Manufacturers Part #: 48028
1/2 In Drive 12 Pt Deep Metric Socket - 28mm Specifications: Size - 28mm Diameter - 1.50" Length - 3.25" Caution: Do not use chrome sockets or drive tools with impact or power tools. Such use damages the tool, and may also result in bodily injury. ...
Add to Cart Details
Cutter Blades

Manufacturers Part #: 14303
Your Price: $7.47
Cutter Blades ...
Add to Cart Details
Banded Earplugs

Manufacturers Part #: 6102
Your Price: $4.09
Banded Earplugs Comfortable, reusable banded plugs are easy to put on and take off.NRR 24. ...
Add to Cart Details
Chrome Ergonomic Adjustable Wrench 15 Inch

Manufacturers Part #: 9215
Your Price: $63.95
no wobble or play in the lower jaw for a perfect grip on a nut or bolt non-protruding jaw shank & slim profile permit access to tight spaces triple-coated chrome finish (2 Ni + 1 Cr) for maximum rust resistance SAE and metric measuring scales directly on the jaws for the best fit made in Spain All IREGA wrenches are manufactured to the highest standards and are guaranteed against any default in workmanshp and materials for the life of the tool....
Add to Cart Details
Stainless Steel Flexible Putty Knife Set - 3-Pc

Manufacturers Part #: SS7100
Your Price: $27.00
Stainless steel, heat-treated, never-rust blades.Mirror finish blades for easy cleanup.Blade thickness is taper ground, for a great feel and flex.Non slip, 2 component ergonomic handles with thumb stop.Lifetime warranty. Set Includes : 1.3", 2" and 3" blade widths.Set is packaged in a black plastic tray with lid and label. Stainless Steel Flexible Putty Knife Set - 3-Pc ...
Add to Cart Details
3/8 In Dr Subaru / Hyundai Oil Filter Wrench - 80mm, 15 Flats

Manufacturers Part #: SU8015
Applicable to: Subaru cars with the H6 using factory oil filter # 15208AA031, Hyundai cars with 4 cylinders, and Nissan vehicles using filter #15208H8903 and #1520855Y00 (found in older Sentra and Trucks). Features: 3/8" drive, 80mm, 15 FlatsMetal ConstructionFits 6 cylinder Subaru'sFits 4 cylinder Hyundai's Assenmacher SU8015 Subaru / Hyundai Oil Filter Wrench ...
Add to Cart Details