10 Inch Cold Chisel - 1974

Old Forge Tools 31974 10" Cold Chisel

Designed to cut bolts, nuts, tees, angles and frame members.
All Oldforge pneumatic tools are warranted for life.

Shipping Weight: 0.6lbs
Manufactured by: Old Forge Tools
Toolsource #: 63298
Manufacturers Part #: 31974
Also Known As: OF31974, OLD-31974, OLD1974

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

Write Review

$9.86

Frequently bought together:

sup Air Chisel Taper Punch Bit - 31997

Add this item to your cart and save $2.47 when purchased with the product above.
Discount applied at checkout.

Related Products

Upholstery Clip Remover - 1001

Manufacturers Part #: 31001
Your Price: $7.78
Old Forge Tools 31001 Upholstery Clip Remover Every toolbox needs one of these handy tools, which quickly removes the upholstery clip from the car door. It fits many different sized clips, including the larger ones. The handle is sturdy, fluted plastic and the finish is black oxide.Supersedes p/n 1001...
Add to Cart Details
Brake Adjusting Tool (Import Vehicles) - 1028

Manufacturers Part #: 31028
*this item has been discontinued
Old Forge Tools 31028 Import Vehicle Brake Adjusting Tool Designed for the VW Rabbit, Jetta, Scirocco, Audi, Nissan (Stanza and Sentra), Honda Accord and Prelude with drum brakes which have access holes.The finish is bright luster plate.Supersedes p/n 1028. ...
Air Chisel - Body Ripper - 31955

Manufacturers Part #: 1955
Your Price: $11.60
Body Ripper Tough as its name.Cuts a clean, short radius, virtually eliminating the added work of edging and welding.Has the exclusive Oldforge CURL-CUT.Finished in black oxide with the distinctive quality of the polished shank.Oldforge Pneumatic Tools are made in the US and are warranted for life.For use with a .401 Parker Shank....
Add to Cart Details
Air Chisel - Double Cut Body Ripper Bit - 1956

Manufacturers Part #: 31956
Your Price: $10.20
Double-Cut Body Ripper This tool has twice the life of a single cutting tool because it has two cutting edges on the body. Both cutting surfaces have he exclusive Oldforge CURL-CUT....
Add to Cart Details
Air Chisel Slotted Panel Cutter Bit - 1958

Manufacturers Part #: 31958
Your Price: $13.49
This tool leaves a clean, smooth edge with the cut curling up through the slot in the middle. This tool has the exclusive Oldforge CURL-CUT. Old Forge 1958 Slotted Panel Cutter ...
Add to Cart Details
Air Chisel Sheet Metal Trimmer Bit - 1959

Manufacturers Part #: 31959
Your Price: $11.75
Old Forge Tools 31959 Air Chisel Sheet Metal Trimmer Bit When you need to edge light sheet metal without stretch or distortion, use this sheet metal trimmer and eliminate much of the touch up grinding that is necessary with other trimmers. This tool has the exclusive Oldforge CURL-CUT. NOTE: This is not designed to be a panel cutter....
Add to Cart Details
Air Chisel Spot Weld Breaker Bit - 1960

Manufacturers Part #: 31960
Your Price: $9.90
Spot Weld Breaker Bit The ideal tool for cutting weld spots. It also works very well for cutting molding and rivets....
Add to Cart Details
Air Chisel Radius Cutter Bit - 1961

Manufacturers Part #: 31961
Your Price: $10.58
Radius Cutter Bit This is an exceptional tool because of its ability to cut a tight radius fast and smooth....
Add to Cart Details
Air Chisel Pneumatic Muffler/Tailpipe Remover Bit

Manufacturers Part #: 31965
Your Price: $9.02
Replaces previous part number 1965 Designed to separate telescoped tubing without damage to the inner section. This tool has the exclusive Oldforge CURL-CUT. Old Forge 31965 Muffler and Tailpipe Remover ...
Add to Cart Details

Customers Also Purchased:

18 In Cold Chisel - 1986

Manufacturers Part #: 31986
Your Price: $21.90
Designed to cut bolts, nuts, tees, angles and frame members.All Oldforge pneumatic tools are warranted for life. Old Forge 31986 18" Cold Chisel ...
Add to Cart Details
1/2 Inch Taper Punch - 1980

Manufacturers Part #: 31980
Your Price: $7.47
Use for peening and crimping bodies, driving rivets and hinge pins.1/2" Diameter.6" Length.Supersedes p/n 1980 Old Forge Tools 31980 Taper Punch ...
Add to Cart Details
Plug Tap, Fractional Size, 3/4-10NC

Manufacturers Part #: 20084
Your Price: $8.73
Use drill size 21/32. For cutting all types of internal threads. Made to exacting specifications. Tough, carbon tool steel for long life. Cuts cleaner, more accurate threads and lasts longer. Drill size permanently marked on each tap. Vermont American 20084 Plug Tap - Fractional Size, 3/4-10NC ...
Add to Cart Details
sup Air Chisel Taper Punch Bit - 31997

Manufacturers Part #: 1997
Your Price: $11.07
Taper Punch Bit. The 1/8" diameter point will drive out pins and rivets....
Add to Cart Details
1/2 In Dr Open End Crowfoot Wrench - 1 1/16 In

Manufacturers Part #: 42271
1/2" Drive SuperKromei? 1/2 Open End Crowfoot Wrench - 1 1/16" Provides access to hard-to-reach fasteners that aren`t easily accessible with a conventional wrench.Length: 2.88"...
Add to Cart Details
3/8 Inch Drive Cummins 3/4 Inch Fuel Injection Flare Nut Socket

Manufacturers Part #: 99100
Your Price: $28.22
The area surrounding the injection pumps on later model 4 valve ISC 8.3 liter and ISB 5.9 liter engines is very difficult to access when removing the fuel supply lines. This specialty socket has been designed with a custom slim configuration and a 3/8" square drive to fit into this confined area. This unique 3/4" Fuel Injection Flare Nut Socket gives the technician the ability to access and remove fuel pump lines with little effort. Used with a r...
Add to Cart Details

Customers Also Shopped For:

Air Chisel Slotted Panel Cutter Bit - 1958

Manufacturers Part #: 31958
Your Price: $13.49
This tool leaves a clean, smooth edge with the cut curling up through the slot in the middle. This tool has the exclusive Oldforge CURL-CUT. Old Forge 1958 Slotted Panel Cutter ...
Add to Cart Details
Right Angle Polisher 7In 0-4000 RPM

Manufacturers Part #: V716P
Your Price: $308.56Includes Free Shipping
Ideal for polishing and buffing paint, metal, wood, or plastic. It has an adjustable speed control and a unique muffler design. Side handle is standard equipment and fits either the left or right side. Full one year warranty on our products to be free from defects in original material and workmanship. Made in USA. V716P Right Angle Polisher ...
Add to Cart Details
Rotary File for Soft Metal Cutting, 1/2 In x 7/8 In, Non-Tapered

Manufacturers Part #: 16677
Your Price: $2.81
Rotary File for Soft Metal Cutting, 1/2" x 7/8", Non-Tapered Tip For filing of soft metal. Special alloy steel is hardened and tempered for long life. Precision-cutting edge will not clog or load up. 1/4" shank fits all drills....
Add to Cart Details
3/8 In Drive 6 Pt Deep Metric Socket - 18mm

Manufacturers Part #: 8418
3/8 In Drive 6 Pt Deep Metric Socket - 18mm Specifications: Size - 18mm Diameter - 0.94" Length - 2.50" Caution: Do not use chrome sockets or drive tools with impact or power tools. Such use damages the tool, and may also result in bodily injury. ...
Add to Cart Details
Pilot Bearing Puller 1/2 to 1 1/2 Inch

Manufacturers Part #: 1170
Your Price: $69.23
Versatile puller built specially for inside pulling jobs, & particularly for removing flywheel pilot bearings on automobiles, trucks, & tractors.Also very practical for pulling motor, generator, & magneto bearings. I.D. Max. Spread 1 1/2" I.D. Min. Spread 1/2" Reach 3/4" Weight 4 lbs. 14 oz. OTC 1170 Pilot Bearing Puller - 1/2" to 1-1/2" ...
Add to Cart Details
Air Chisel - Tailpipe Cutoff Tool - 1968

Manufacturers Part #: 31968
Your Price: $8.68
Old Forge Tools 39168 Air Hammer Accessory - Tailpipe Cutoff Tool The sharp concave edge on the thin blade will cut off the tailpipe with ease. ...
Add to Cart Details

Current Reviews: 0

Hand Tools > Chisels > Individual > 10 Inch Cold Chisel - 19

10 Inch Cold Chisel - 1974

Frequently bought together:

Related Products

Customers Also Purchased:

Customers Also Shopped For: