Individual 1/4 In. Drive Torx Bit Sockets
A Torx bit socket is a driver bit with a six-lobe star tip held in a socket body that fits a ratchet. Torx fasteners are common on interior trim, seats, mirrors, lamps, small engine parts and electronics, because the star shape takes driving torque without camming out the way a Phillips head can. This category holds 1/4 in. drive Torx bit sockets sold one size at a time, for replacing a lost bit or adding a size your set does not have. Auto repair technicians, equipment repair shops and DIY users all use them.
Choosing the right bit
Torx sizes are called T numbers, such as T15, T25 and T27; a higher number means a larger star. Standard Torx bits have a solid tip. Tamper resistant Torx bits have a hole in the center of the tip to clear the pin in a security fastener, and they also fit standard Torx screws. Do not confuse these internal Torx bits with external Torx sockets, which fit over a star-shaped bolt head and are a different tool.
Sizes and fit
The 1/4 in. drive suits the small T sizes found on trim and light fasteners, where a small ratchet gives better feel and less risk of over-tightening. Seat the bit fully in the fastener before turning, since a worn or partly seated bit strips the recess quickly. Replace a bit as soon as the lobes look rounded.
Using them
Pair these bits with a 1/4 in. ratchet, a spinner handle or an extension for reach. Break loose a very tight fastener with care, because small bits can snap under too much force. Matching sets are in the Sets category, and pin-in security bits are also listed under Tamperproof Individual.
Brands here include SK, VIM, Lisle, K Tool, CTA and ATD.



















































Follow us on social media