1/4 In Drive Tamperproof Torx Bit Sockets
Tamperproof Torx screws, also called security Torx or pin-in-star screws, have a small post in the middle of the star recess so a standard Torx bit will not fit. A tamperproof Torx bit has a hole in its tip that slides over the post. This category holds individual 1/4 in. drive tamperproof Torx bit sockets in common T sizes from T-10 upward, in several overall lengths. Auto technicians, appliance and electronics repair techs and maintenance crews use them on security screws found on control modules, lighting, appliances and public fixtures.
Choosing size and length
Read the T number on the screw or in the service information and match it exactly; a bit one size small will spin and round the recess. Length matters as much as size here. Product names list the overall length in millimeters, from shorter bits for open access up to long bits that reach screws sunk deep in a housing or behind a lens.
Using them
Push the bit fully over the center pin before turning, and keep it square to the screw. A tamperproof bit also fits ordinary Torx screws of the same size, so one bit can cover both, but a standard bit will not fit a tamperproof screw.
All bit sockets here are from Genius. Standard 1/4 in. drive Torx bit sockets and Torx bit socket sets are in the neighboring Individual and Sets categories.











































.jpeg)



Follow us on social media