Free shipping on orders overFree shipping over $250 Lower 48 states and DC. Excludes freight and oversize.

1/2" Drive Individual

Displaying 1 to 26 (of 26 products)
(image for) 1/2" 3/8" Drive Ratcheting Wrench
1/2" 3/8" Drive Ratcheting Wrench
K Tool International BCWZ132
Your Price:
(image for) 1/2" DR 30mm CROWFOOT WRENCH
1/2" DR 30mm CROWFOOT WRENCH
Stanley Proto Industrial Tools POJ5330MCF
Your Price:
(image for) 24mm Jumbo Crowfoot Wrench
24mm Jumbo Crowfoot Wrench
V8 Tools 6824
Your Price:
(image for) 3/8" Drive SAE 1/2" Open-End Crowfoot Wrench
3/8" Drive SAE 1/2" Open-End Crowfoot Wrench
J.H. Williams JHWBCO16
Your Price:
List Price: $32.75
36% off
(image for) 30MM NOx & Soot Socket
30MM NOx & Soot Socket
Lisle 12310
Your Price:
(image for) 38.4 mm Crows Foot
38.4 mm Crows Foot
Lisle 54580
Your Price:
(image for) Crow Foot Wrench 21mm x 1/2" 12 point
Crow Foot Wrench 21mm x 1/2" 12 point
Mueller - Kueps 571221
Your Price:
List Price: $24.49
25% off
(image for) Crow Foot Wrench 22mm x 1/2" x 12 Point
Crow Foot Wrench 22mm x 1/2" x 12 Point
Mueller - Kueps 571 222
Your Price:
List Price: $25.49
24% off
(image for) WR 1/2\" DR JUMBO CROWFT 34MM*NLA
WR 1/2\" DR JUMBO CROWFT 34MM*NLA
Sunex Tools SU97434A
Your Price:
(image for) 50mm 1/2" Dr. Full Polish Crowfoot Wrench
50mm 1/2" Dr. Full Polish Crowfoot Wrench
Titan 61150
Your Price:
List Price: $26.62
37% off
Displaying 1 to 26 (of 26 products)

1/2 In Drive Metric Crowfoot Wrenches

A crowfoot wrench is an open end wrench head with a square drive hole, so it attaches to a ratchet, extension or torque wrench. It reaches nuts on lines, pumps and fittings where a socket cannot slide over the fastener because a tube or hose is in the way. This category holds individual 1/2 in. drive metric crowfoot wrenches sold one size at a time, including jumbo sizes; product names show sizes such as 38mm, 41mm, 42mm and 46mm.

Choosing and using a crowfoot

Buy the exact metric size of the nut, since an open end on a loose fit can spread or round the flats. The 1/2 in. drive suits the larger sizes and the higher torque that large fittings need. Use steady pressure and keep the jaws fully seated on the nut.

Crowfoot wrenches and torque

A crowfoot moves the fastener out ahead of the torque wrench drive, which changes the torque reaching the nut. Mounting the crowfoot at a right angle to the torque wrench handle keeps the effective length the same, so the reading stays as set. In line with the handle, the setting needs to be adjusted for the added length, following the torque wrench maker's method.

Fleet and diesel shops, heavy equipment mechanics and industrial maintenance crews use them on large hydraulic fittings, axle nuts and pump lines.

Brands here include V8 Tools, Proto, Lisle, Mueller-Kueps and Martin. For smaller metric sizes, see 3/8 In Drive Individual and 1/4 In Drive Individual.