Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Tire Tools, Wheels & Suspension > Hub and Hubcap Tools > Wheel Hub Remov

Wheel Hub Remover

Wheel Hub Remover

Wheel Hub Remover J-42129

Number: J-42129
Applications: CORVETTE

Due to Cadillac picking up the (Y) car platform, and since the hub assembly is pressed into the steering knuckle, previously essential J-42129 is required to pull the hub from the spindle without causing damage to the hub bearing assembly.

Kent-Moore KM J-42129 Wheel Hub Remover

  • Shipping Weight: 3lbs
  • Manufactured by: Kent-Moore
  • Toolsource #: 112098
  • Manufacturers Part #: J-42129
  • Also Known As: KMJ42129

Only 1 left in stock - order soon


Frequently bought together:

Customers Also Purchased:

Customers Also Shopped For:

  • Axle Shaft Remover
    Axle Shaft Remover
    Manufacturers Part #: J-33008-A
    Your Price: $123.08
    Axle Shaft Remover J-33008-A Tool Number: J-33008-A Tool Name: AXLE SHAFT REMOVER Applications: 3T40 3T40, 4T80E transaxle Used with the J-2619-01 slide hammer to dislodge the internal retaining ring allowing the removal of the drive shaft assembly. Use of J-33008-A prevents possible damage to the transaxle case which may occur if an attempt is made to pry against. NOTICE: J-33008 initial version will not work on 4T80E. J-33008-A wa...
  • Ball Joint Separator
    Ball Joint Separator
    Manufacturers Part #: J-41820
    Your Price: $317.28
    Ball Joint Separator J-41820 Tool Number: J-41820 Tool Name: BALL JOINT SEPARATOR Applications: 97 U VAN, W CAR '97 U VAN, W CAR The steering knuckle has changed on the 1997 and later W-cars and U-vans. There is a limited clearance between he control arm and the steering knuckle that prevents previously essential ball joint separator from being used. Kent- Moore KM J-41820 Ball Joint Separator ...
  • Ball Joint Press
    Ball Joint Press
    Manufacturers Part #: C-4150B
    Your Price: $187.04
    Use this Ball Stud Remover to separate the ball joint stud from the spindle on Passenger Cars, Trucks & Jeeps. Also used to remove wheel studs from LH vehicles and pitman arm from R.W.D. vehicles. Thru Current Miller Special Tools Mopar C-4150B Ball Joint Press ...
  • Axle Shaft Removal Extension J Car
    Axle Shaft Removal Extension J Car
    Manufacturers Part #: J-29794
    Your Price: $152.60
    Applications: J CAR Non-stock item, back order status; please email for cost and lead time before ordering. This is a non-quoted item and the price fluctuates; we have to get pricing each time an order is placed. Kent-Moore J-29794 Axle Shaft Removal Extension ...
  • Slide Hammer w/ Threaded End - 5 Lb
    Slide Hammer w/ Threaded End - 5 Lb
    Manufacturers Part #: 1155
    Your Price: $47.77
    Slide Hammer w/ Threaded End - 5 Lb 24" long.5 lb. hammer.5/8"-18 threaded end.May be used w/ OTC internal pulling attachment or w/ threaded adapters.Weight: 7 lbs. 4 oz. ...
  • Ball Joint Separator Tool
    Ball Joint Separator Tool
    Manufacturers Part #: J-43631
    Your Price: $222.46
    Ball Joint Separator Tool J-43631 Tool Number: J-43631 Tool Name: Ball Joint Separator Tool Applications: C/K TRUCK C/K TRUCK Current tools do not have a large enough opening to accept the ball joint of the GMT800. Using a hammer to remove the ball joint can cause damage to the ball joint and related components. This tool applies extreme pressure on the ball joint stud to break it loose. Loosen the ball joint nut. Install the tool o...

Current Reviews: 0