Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Engine Repair > Cylinder Tools > Crankshaft > Crankshaft Balancer Remov

Crankshaft Balancer Remover

Crankshaft Balancer Remover
Crankshaft Balancer Remover J-44226

Tool Number: J-44226
Tool Name: Crankshaft Balancer Remover
Applications: IN-LINE 6 CYL

2002 GMT360 (Chevy Trail Blazer, GMC Envoy, Olds Bravada). J-44226 will lock onto the front hub and hold the crankshaft stationary during removal of the hub bolt. J-44226 can also be used as a puller to remove the hub once the bolt is removed.
Kent-Moore J-44226 Crankshaft Balancer Remover
  • Manufactured by: Kent-Moore
  • Toolsource #: 111851
  • Manufacturers Part #: J-44226
  • Also Known As: KMJ44226

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

$423.14

Related Products


Customers Also Purchased:

  • Camshaft Holding Tool
    Camshaft Holding Tool
    Manufacturers Part #: J-44221
    Your Price: $41.54
    Camshaft Holding Tool J-44221 Tool Number: J-44221 Tool Name: Camshaft Holding Tool Applications: IN-LINE 6 CYL 2002 GMT360 (Chevy Trail Blazer, GMC Envoy, Olds Bravada). Holding the camshafts at T.D.C. to ensure proper timing when servicing cams, gears, chains, etc. is important. J-44221 is a metal plate positioned over the ends of the camshaft to prevent rotation. Kent-Moore KM J-44221 Camshaft Holding Tool ...

Customers Also Shopped For:

  • 15 Bin Table Top Storage Rack
    15 Bin Table Top Storage Rack
    Manufacturers Part #: W5186
    Your Price: $22.94
    15 Bin Table Top Storage Rack  W5186 Unique design provides plenty of storage below bins. Use in home, office, garage or workshop. Compact design fits anywhere. Powder coated finish resists corrosion. Steel rack assembles in minutes. Easy to access removable bins. Red bin dimensions: 3 in. high x 4-1/16 in. wide x 6-1/2 in. deep. Overall dimensions: 15-7/8 in...
  • Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover
    Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover
    Manufacturers Part #: TH28000
    Your Price: $38.18
    Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover Air impact screw & fastener removal tool that uses standard, changeable, 5/16" hex insert bits that fit any or all fasteners & screws used today.It is used in conjunction w/ a standard air hammer, w/ safety spring, at low air pressures.The tool will loosen rusted, corroded, undercoated, painted, dirty, & overly tightened screws fast & efficiently.Vibration shakes the screw loose while you ...
  • Crankshaft Balancer Puller Kit for GM
    Crankshaft Balancer Puller Kit for GM
    Manufacturers Part #: 7912
    Your Price: $101.66Includes Free Shipping
    Everything you need to pull harmonic balancers with three tapped holes.The shoulder bolts are designed to prevent them from being installed too deply, protecting the crank sensor and/or interrupter rings from damage.The spacer adapter gives the puller`s forcing screw something to push against.The kit works on 1990 and newer 3300 and 3800 V-6 engines.Includes No. 518 Flange-type Puller and No. 7911 Adapter Set.The 7911 Adapter Set consists of the...
  • EPDM 2 Braid Air Hose 1/4 In ID x 25 Ft 1/4 In NPT
    EPDM 2 Braid Air Hose 1/4 In ID x 25 Ft 1/4 In NPT
    Manufacturers Part #: 1630
    Your Price: $25.70
    EPDM 2 Braid Air Hose - 1/4 In ID x 25 Ft Male 1/4" NPT both ends.Deluxe heavy duty EPDM rubber is designed for tough service station and shop applications.Kink resistant and flexible in extreme temperatures, resists abrasion, weathering and ozone.Assemblies coupled with brass fittings, bulk hose comes without fittings in either a dispensing box or handy reel.Limited oil resistance....
  • Crankshaft Balancer Remover 3800 Engine 3.3, 3.8L
    Crankshaft Balancer Remover 3800 Engine 3.3, 3.8L
    Manufacturers Part #: J-38197-A
    Your Price: $255.46Includes Free Shipping
    Applications: 3.3, 3.8L 3800 ENGINE The 1992 & later 3800 engine has a special design harmonic balancer which requires J 38197-A for removal from the crankshaft. The tool consists of a puller body, mounting bolts and a forcing screw which reacts against the crankshaft. Required to pull the crankshaft balancer from 3300 and 3800 series engines.Applications: Buick, Oldsmobile, Chevrolet, PontiacManufacturer drop-ship. Non-stock item, manufacturer ...
  • Chrysler Crankshaft Pulley Kit OTC6075
    Chrysler Crankshaft Pulley Kit OTC6075
    Manufacturers Part #: 6075
    Your Price: $129.93Includes Free Shipping
    This 3-jaw puller is used with the insert to remove the crankshaft damper whenever the timing belt, water pump or most types of front cover service is required. The tool kit includes a damper installing tool with a bearing. Works on 1995 and newer 3.5L V-6 engines found in the Chrysler New Yorker and Concorde, Dodge Intreprid, and Eagle Vision; 1995-newer 2.0L, and 2.4L 4-cylinder, and 2.5L V-6 used in the Cirrus, Stratus, and Breeze; plus 1995 a...

Current Reviews: 0