Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Engine Repair > Harmonic Balancer Tools > Harmonic Balancer Install

Harmonic Balancer Installer

Harmonic Balancer Installer
Kent-Moore J-29113 Harmonic Balancer Installer
  • Shipping Weight: 1lbs
  • Manufactured by: Kent-Moore
  • Toolsource #: 112170
  • Manufacturers Part #: J-29113
  • Also Known As: KMJ29113

Only 1 left in stock - order soon

$117.45

Related Products

  • Chrysler Harmonic Damper Pulley Holding Tool
    Chrysler Harmonic Damper Pulley Holding Tool
    Manufacturers Part #: 98450
    *this item has been discontinued
    Harmonic Damper Pulley Holding Tool (Chrysler Engines) This unique tool has been developed to aid in the removal and installation of the crank bolt on most Chysler engines.In operation this tool holds the harmonic damper pulley from rotating with three grooved pins. The tool has a 1/2" square drive hole for use with a breaker bar or ratchet. This specialty holding tool works with the following engines: 1990 and later vans with 3.3L1996-1997 auto...
  • Crankshaft Balancer Remover 3800 Engine 3.3, 3.8L
    Crankshaft Balancer Remover 3800 Engine 3.3, 3.8L
    Manufacturers Part #: J-38197-A
    Your Price: $255.46Includes Free Shipping
    Applications: 3.3, 3.8L 3800 ENGINE The 1992 & later 3800 engine has a special design harmonic balancer which requires J 38197-A for removal from the crankshaft. The tool consists of a puller body, mounting bolts and a forcing screw which reacts against the crankshaft. Required to pull the crankshaft balancer from 3300 and 3800 series engines.Applications: Buick, Oldsmobile, Chevrolet, PontiacManufacturer drop-ship. Non-stock item, manufacturer ...
  • Flywheel Turner
    Flywheel Turner
    Manufacturers Part #: 23800
    Your Price: $24.09
    Hold or turn flywheels and flexplates on most vehicles.Use this special wrench to turn the flywheel and rotate the engine.Also holds the flywheel or flexplate when torqueing the flywheel or harmonic balancer bolts.Folds for easy storage.Shipping wt. 1 lb. 4 oz. Lisle 23800 Flywheel Turner ...
  • GM Harmonic Damper Holding Tool
    GM Harmonic Damper Holding Tool
    Manufacturers Part #: 64500
    Your Price: $33.45
    Services both trucks and SUVs by delivering faster crank bolt removals and installations on 4.2, 3.5 and 2.8-liter in-line GM engines.The tool simply holds the pulley stationary in order to remove the center bolt.In replacing the center bolt after installation of the pulley, factory specifications require up to 240 pounds of torque to seat the pulley properly. Refer to factory specificaitons for specific requirements. Applications: 4.2L Straight ...
  • GM Harmonic Damper Holding Tool
    GM Harmonic Damper Holding Tool
    Manufacturers Part #: 64700
    Your Price: $33.45
    This harmonic damper pulley holding tool was developed to aid in the removal and installation of the crank bolt. The bolts holding these pulleys are extremely tight and without the #64700, removal is extremely difficult at best. In replacing the center bolt after installation of the pulley, factory specifications require up to 240 pounds of torque to seat the pulley properly. Refer to factory specifications for specific requirements. These tools ...
  • Chrysler Harmonic Balancer Puller Set
    Chrysler Harmonic Balancer Puller Set
    Manufacturers Part #: 6284
    Your Price: $113.60Includes Free Shipping
    Allows the technician to remove and install the harmonic balancer on the most popular Chrysler engines.Includes OTC No. 6667 puller, which removes the harmonic balancer from the crankshaft; and OTC No. 6495 holding tool, which holds the harmonic balancer when tightening or loosening the crankshaft bolt, or removing the balancer. OTC 6284 Chrysler Harmonic Balancer Puller Set ...

Customers Also Purchased:

  • Crankshaft Balancer Remover
    Crankshaft Balancer Remover
    Manufacturers Part #: J-41816
    Your Price: $175.53Includes Free Shipping
    Crankshaft Balancer Remover J-41816 Tool Number: J-41816 Tool Name: Crankshaft Balancer Remover Applications: GEN 3 ENGINE F, Y-CAR The balancer on the LSI engine is not keyed to the crankshaft and is therefore a very high load press fit. It must be removed by pulling directly on the hub, not on the outer edge of the balancer. Kent-Moore KM J-41816 Crankshaft Balancer Remover ...

Customers Also Shopped For:


Current Reviews: 0