Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Engine Repair > Cylinder Tools > Crankshaft > Crank Gear Installer/Seal Driv

Crank Gear Installer/Seal Driver

Crank Gear Installer/Seal Driver
Crank Gear Installer/Seal Driver J-5590

Tool Number: J-5590
Tool Name: Crank Gear Installer/Seal Driver
Applications: 2.8,3.1,3.4L

F, L, U Van, W, S/T Truck, 2.8, 3.1, 3.4L This tool is used to install the lower timing sprocket to the crank shaft.
Kent-Moore KM J-5590 Crank Gear Installer/Seal Driver
  • Shipping Weight: 1.54lbs
  • Manufactured by: Kent-Moore
  • Toolsource #: 112339
  • Manufacturers Part #: J-5590
  • Also Known As: KMJ5590
$26.04

Related Products


Customers Also Purchased:

  • Two Jaw Puller - A/C, TRANS, ST
    Two Jaw Puller - A/C, TRANS, ST
    Manufacturers Part #: J-8433
    Your Price: $278.56Includes Free Shipping
    Applications: A/C, TRANS, ST1999-1/2 & Later T-Series & W5 with Isuzu MLD6Q 6-Speed manual transmission.The countershaft rear bearing requires a great deal of force over a large span to remove, and must be removed before the countershaft can be taken out of the transmission case.J-8433 is used with previously essential J-22912-01 Bearing Remover to remove the countershaft rear bearing.J-22912-01 is placed around the countershaft rear bearing, wi...
  • Oil Pump Cover Alignment Band
    Oil Pump Cover Alignment Band
    Manufacturers Part #: J-21368
    Your Price: $51.13
    Tool Number: J-21368 Tool Name: OIL PUMP COVER ALIGNMENT BAND Applications: 3L80,&HD,4L60 This item may not be in stock; please email service@toolsource.com for lead time. Kent-Moore J-21368 Oil Pump Cover Alignment Band ...
  • Stator Pump Bushing Driver
    Stator Pump Bushing Driver
    Manufacturers Part #: J-2501914
    Your Price: $216.42Includes Free Shipping
    Non-stock item, manufacturer drop ship; please email service@toolsource.com for cost and lead time before ordering. This is a non-quoted item and the price fluctuates; we have to get pricing each time an order is placed. Kent-Moore Tools J-2501914 Stator Pump Bushing Driver ...
  • Pinion Bearing Installer NVG 126/266 Manual Transmission
    Pinion Bearing Installer NVG 126/266 Manual Transmission
    Manufacturers Part #: J-7817
    Your Price: $107.95Includes Free Shipping
    Applications: NVG 126/266 Manual Transmission Non-stock item, back order status; please email service@toolsource.com for cost and lead time before ordering. This is a non-quoted item and the price fluctuates; we have to get pricing each time an order is placed. Kent-Moore J-7817 Pinion Bearing Installer ...
  • Crankshaft Gear Puller/Remover
    Crankshaft Gear Puller/Remover
    Manufacturers Part #: J-5825-A
    Your Price: $346.44Includes Free Shipping
    Applications: CHEV V-6 & V-8 Non-stock item, manufacturer drop ship; please email service@toolsource.com for cost and lead time before ordering. This is a non-quoted item and the price fluctuates; we have to get pricing each time an order is placed. Kent-Moore J-5825-A Crankshaft Gear Puller/Remover ...
  • Intermediate Band Apply Pin Gauge 4L60
    Intermediate Band Apply Pin Gauge 4L60
    Manufacturers Part #: J-33037
    Your Price: $435.73Includes Free Shipping
    Applications: 4L60 B, D, F, Y, 4L60, S/T, C/K, M/L, G/P J 33037 is used to gauge the intermediate band apply pin to select the proper pin length. Install J 33037 and apply the proper torque to bring the gauge line in view through the go-no-go window. Non-stock item, manufacturer drop ship; please email service@toolsource.com for cost and lead time. This is a non-quoted item and the price fluctuates; we have to get pricing each time order is plac...

Customers Also Shopped For:

  • Bushing and Bearing Remover - (3-4 inch)
    Bushing and Bearing Remover - (3-4 inch)
    Manufacturers Part #: J-26941
    Your Price: $188.62Includes Free Shipping
    Tool Number: J-26941 Tool Name: Bushing and Bearing Remover - (3-4 inch) Applications: 2010 Camaro with Aisin or Tremec Transmission The rear seal on manual transmissions is installed deep into its bore in the extension housing. J-26941 is used with either a slide hammer or J-45124 Puller Bridge to remove the seal without scratching the bore. Kent-Moore KM J-26941 Bushing and Bearing Remover - (3-4 inch) ...
  • Crank Sprocket Remover - Chrysler, Jeep, Dodge
    Crank Sprocket Remover - Chrysler, Jeep, Dodge
    Manufacturers Part #: 6793A
    Your Price: $70.83
    Use this special tool to remove the crankshaft sprocket on 2.0 and the 2.4 liter engines. Originally Shipped in Kit Number 6784 6809 6822 Current Usage * 2006 (JR, PT, RS, TJ) - Systems (9 - Engine, 2.0L DOHC, 9 - Engine, 2.4L, 9 - Engine, 2.4L DOHC) 2007 (PT, RS) - Systems (9 - Engine, 2.4L, 9 - Engine, 2.4L DOHC) 2008 (PT) - Systems (9 - Engine, 2.4L DOHC) 2009 (PT) - Systems (9 - Engine, 2.4L DOHC) 2010 (PT) - Systems (9 - Engine, 2.4L ...
  • Axle Seal Installer
    Axle Seal Installer
    Manufacturers Part #: 5041
    Your Price: $94.95
    Use this tool to install front axle seals into Dana #44 and 60 disconnect axles to their proper depth. Also used with Miller P/N 8411, 8415, 8416 and 8834. 1988 thru 2002.Replacement parts include 5041-1 Installer, 5041-2 Forcing Screw and 5041-3 Disc, also available separately. Manufacturer drop ship; please email service@toolsource.com for lead time. SPX Miller Special Tools Mopar 5041 Axle Seal Installer ...
  • Metric Stubby Ratcheting Combination Wrench Set 12-Pc
    Metric Stubby Ratcheting Combination Wrench Set 12-Pc
    Manufacturers Part #: MWS-12RCS
    Your Price: $121.86Includes Free Shipping
    Fine tooth design with dual-pawl mechanism for extra strength.High-polished chrome finish cleans easily.Ratchet lever is easily accessible for quick direction changes.Recessed corners in ends provide extra turning power. Includes: 1208MRCS 8mm1209MRCS 9mm1210MRCS 10mm1211MRCS 11mm1212MRCS 12mm1213MRCS 13mm1214MRCS 14mm1215MRCS 15mm1216MRCS 16mm1217MRCS 17mm1218MRCS 18mm1219MRCS 19mm A 15% restocking fee is charged to return this item (unused). Wi...
  • High-Pressure Inflating Connection Schrader 1/8 In NPT Male
    High-Pressure Inflating Connection Schrader 1/8 In NPT Male
    Manufacturers Part #: 556
    Your Price: $26.30
    This high pressure inflating connection attaches securely by hand or wrench to the valve cap threads of high pressure valves. It can be fitted to gauging and inflating devices by a variety of methods. Various angles permit easy attachment to hard-to-reach valves. Specifications: Fits thread size: .305-32Air line connection: 1/8" NPT MaleMaximum pressure rating (PSIG): 3,000Configuration: Air line connection 90? to axis of valveRecommended Max. To...

Current Reviews: 0