Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Engine Repair > Cylinder Tools > Crankshaft

  • Balancer Installer
    Balancer Installer
    Manufacturers Part #: J-42845
    Your Price: $287.26Includes Free Shipping
    Balancer Installer J-42845 Tool Number: J-42845 Tool Name: BALANCER INSTALLER Applications: 8.1L DIESEL 2001 C/K TRUCK, G-VAN, MED DUTY, C3500D. J-42845 will properly install the balancer to the correct depth onto the crankshaft as stated in the service manual. The extra large size of the pulley case easily be misaligned during installation without J-42845. This tool was designed with heavy duty features to handle the most stubborn ...
  • Center Guide Assembly
    Center Guide Assembly
    Manufacturers Part #: J-35686-1
    Your Price: $181.36Includes Free Shipping
    Kent-Moore Tools J-35686-1 Center Guide Assembly ...
  • Connecting Rod Guide GEN 3
    Connecting Rod Guide GEN 3
    Manufacturers Part #: J-41556
    Your Price: $132.54Includes Free Shipping
    Applications: GEN 3 ENGINE J-41556 consists of 2 guide rods that thread into the connecting rod bolt holes to guide the connecting rod into the piston bore, and avoid damage to the crankshaft. Non-stock item, manufacturer drop ship; please email service@toolsource.com for cost and lead time before ordering. This is a non-quoted item and the price fluctuates; we have to get pricing each time an order is placed. Kent-Moore J-41556 Connecting Rod G...
  • Crank Gear Installer/Seal Driver
    Crank Gear Installer/Seal Driver
    Manufacturers Part #: J-5590
    Your Price: $43.76
    Crank Gear Installer/Seal Driver J-5590 Tool Number: J-5590 Tool Name: Crank Gear Installer/Seal Driver Applications: 2.8,3.1,3.4L F, L, U Van, W, S/T Truck, 2.8, 3.1, 3.4L This tool is used to install the lower timing sprocket to the crank shaft. Kent-Moore KM J-5590 Crank Gear Installer/Seal Driver ...
  • Crankshaft Balancer Installer - 4.0, 4.6L
    Crankshaft Balancer Installer - 4.0, 4.6L
    Manufacturers Part #: J-41998-B
    Your Price: $91.17
    J-41998-B is used to install the balancer on all engines with an 18 mm balancer bolt.J-41998-B is installed through the balancer into the crankshaft, and then its bolt is held while its nut is tightened to seat the balancer onto the crankshaft.Applications: 4.0, 4.6L Kent-Moore J-41998-B Crankshaft Balancer Installer ...
  • Crankshaft Balancer Remover
    Crankshaft Balancer Remover
    Manufacturers Part #: J-44226
    Your Price: $452.76Includes Free Shipping
    Crankshaft Balancer Remover J-44226 Tool Number: J-44226 Tool Name: Crankshaft Balancer Remover Applications: IN-LINE 6 CYL 2002 GMT360 (Chevy Trail Blazer, GMC Envoy, Olds Bravada). J-44226 will lock onto the front hub and hold the crankshaft stationary during removal of the hub bolt. J-44226 can also be used as a puller to remove the hub once the bolt is removed. Kent-Moore J-44226 Crankshaft Balancer Remover ...
  • Crankshaft Balancer Remover
    Crankshaft Balancer Remover
    Manufacturers Part #: J-41816
    Your Price: $175.53Includes Free Shipping
    Crankshaft Balancer Remover J-41816 Tool Number: J-41816 Tool Name: Crankshaft Balancer Remover Applications: GEN 3 ENGINE F, Y-CAR The balancer on the LSI engine is not keyed to the crankshaft and is therefore a very high load press fit. It must be removed by pulling directly on the hub, not on the outer edge of the balancer. Kent-Moore KM J-41816 Crankshaft Balancer Remover ...
  • Crankshaft Gear Puller/Remover
    Crankshaft Gear Puller/Remover
    Manufacturers Part #: J-5825-A
    Your Price: $368.33Includes Free Shipping
    Applications: CHEV V-6 & V-8 Non-stock item, manufacturer drop ship; please email service@toolsource.com for cost and lead time before ordering. This is a non-quoted item and the price fluctuates; we have to get pricing each time an order is placed. Kent-Moore J-5825-A Crankshaft Gear Puller/Remover ...
  • Crankshaft Hub Remover & Installer LT1
    Crankshaft Hub Remover & Installer LT1
    Manufacturers Part #: J-39046
    Your Price: $816.32Includes Free Shipping
    Applications: LT1 Non-stock item, manufacturer drop ship; please email service@toolsource.com for cost and lead time. This is a non-quoted item and the price fluctuates; we have to get pricing each time order is placed. Kent-Moore J-39046 Crankshaft Hub Remover & Installer ...