Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Motorcycle Tools > V-Twin Motorcycle Tools > 17mm Engine Oil Drain Plug Wren

17mm Engine Oil Drain Plug Wrench

17mm Engine Oil Drain Plug Wrench
17mm Engine Oil Drain Plug Wrench 8799

Part No. 8799
•Reversible offset ratcheting wrench is used to
remove/install the engine oil drain plug on
metric V-Twin® motorcycles: Honda Shadows,Yamaha V-Stars, Kawasaki Vulcan and
other metric motorcycles with 17mm engine
and rear differential drain plugs
•17mm extended wheel, low profile head
•E-Z Grip handle

Kaster 8799 17mm Engine Oil Drain Plug Wrench 
  • Manufactured by: Kastar
  • Toolsource #: 119628
  • Manufacturers Part #: 8799
  • Also Known As: KH8799, LNG-8799

Only 1 left in stock - order soon

$24.32

Related Products


Customers Also Purchased:

  • Harley Davidson Front Fork Cap Wrench
    Harley Davidson Front Fork Cap Wrench
    Manufacturers Part #: 67250
    Your Price: $26.75
    This special tool has been designed to R&R the front fork caps on 1984 and later big twin Harley Davidson Motorcycles. Removing the fork cap is necessary when servicing fork fluids. This is required at each 10,000 mile service. In most cases it eliminates the need to undo electric connectors and remove the flairing on FLH, FLHT, FLTR and FLHX models, this results in a savings of over 30 minutes. Features: Designed to remove and replace front ...
  • Deluxe Gel Knee Pads
    Deluxe Gel Knee Pads
    Manufacturers Part #: 7105
    Your Price: $16.03
    Deluxe Gel Knee Pads 7105 Super-Thick 1/2” High Density Closed-Cell Foam Large, Low-Profile Cap Designed To Prevent “Roll Over” Anti-Compression Air Injected Gel Easy-To-Use Velcro® Closures SAS Safety Corporation 7105 Deluxe Gel Knee Pads ...
  • Steering Head Race & Cup Installer
    Steering Head Race & Cup Installer
    Manufacturers Part #: 5602
    Your Price: $54.66
    Steering Head Race & Cup Installer  5602 Unique design will accurately and easily press steering head races in to place. eliminating misaligned or damaged races With 5 heat-treated bushings you are assured a precise fit on most all bikes FilmTech  5602 Steering Head Race & Cup Installer  ...
  • Late Sealed Wheel Bearing and Installer Kit
    Late Sealed Wheel Bearing and Installer Kit
    Manufacturers Part #: 939
    Your Price: $282.83Includes Free Shipping
    Late Sealed Wheel Bearing and Installer Kit 939 Use on all 2000-present Twin Cam® models, and all 2000 Sportsters® models, and VRod ®s 2002-present. Use to remove and install “new style” sealed wheel bearings without damaging the wheel. Includes new remover and installer for 25mm bearing, with or without ABS. JIMS USA JIM  939 Late Sealed Wheel Bearing and Installer Kit ...
  • 1-1/4 Inch Round Magnifying Mirror w/ Pocket Clip & Telescoping
    1-1/4 Inch Round Magnifying Mirror w/ Pocket Clip & Telescoping
    Manufacturers Part #: 2840D
    Your Price: $7.97
    KD Tools 2840D Features: Perfect for inspecting hidden areas, the mirror swivels to almost any position.Overall length: 17". KD Tools 2840D 1-1/4" Round Magnifying Mirror with Pocket Clip & Telescoping Handle ...
  • Front Fork Compressor Tool
    Front Fork Compressor Tool
    Manufacturers Part #: 1776
    Your Price: $317.35Includes Free Shipping
    Use to compress the fork springs in cartridge style shocks when servicing or re-building.The compressor can be mounted in a vise for easy hands free servicing.Also includes an adapter for FL forks to eliminate direct contact with spring coil and a special rod to pull up the fork damper rod.Use on all cartridge-style shocks.Available separately: No.1777 - Use with JIMS No.1776 Fork Compressor tool for 2" undersize to 16" oversize length fork tube...

Customers Also Shopped For:

  • Grease Fitting Hardware Kit - 70-Pc
    Grease Fitting Hardware Kit - 70-Pc
    Manufacturers Part #: W5215
    Your Price: $9.47
    This 70 piece grease fitting hardware kit contains 9 popular sizes, which include (20) 1/4"-28, (5) 1/4"-28 90 degree, (5) 1/4"-28 45 degree, (10) 1/8"-27, (5) 1/8"27 90 degree, (5) 1/8" 27 45 degree, (10) 6mm-1, (5) 8mm-1 and (5) 10mm-1. Features: 70 Piece grease fitting hardware kit Kit comes in a convenient re-sealable plastic case Kit contains 3 sizes of 1/4" and 1/8" fittings Kit contains 3 sizes of me...
  • Phenolic Backing Disc - 3In
    Phenolic Backing Disc - 3In
    Manufacturers Part #: 94700
    Your Price: $3.29
    3In Phenolic Backing Disc 3" Phenolic reinforced backing plates for sanding and grinding work. These discs are designed to be lightweight and provide desired flexibility for sanding. If additional rigidity is required, combine 2 or 3 together. Each plate has the same molded depressed center contour and 7/8" I.D. hole. Maximum safe speed is 6,000 RPM. Always wear safety eye and face protection for this type of work. ...
  • Factory Pack Automotive Basecoat TOYOTA 1G0 Smokey Granite Pearl
    Factory Pack Automotive Basecoat TOYOTA 1G0 Smokey Granite Pearl
    Manufacturers Part #: 19333
    Your Price: $17.64
    FACTORY PACK Automotive Basecoat is an automotive grade urethane basecoat packaged in a convenient aerosol can. The cans feature a unique valve and tip combination to provide a professional spray pattern for spray gun-like results.FACTORY PACK colors have been matched to OEM standards and can be used for jambs, cut-ins, small accessories, touch ups, or anywhere normal mixed basecoat would be applied.FACTORY PACK colors should be clear-coated for ...
  • Kraftform 7445 Hexagon Torque Screwdriver, 1/4" Head, 2.5-11.5"/
    Kraftform 7445 Hexagon Torque Screwdriver, 1/4" Head, 2.5-11.5"/
    Manufacturers Part #: 05074710002
    Your Price: $81.36
    Application: Suitable for 1/4" DIN 3126-C 6.3 and E 6.3 (ISO 1173) hexagon insert bits and Wera Series 1 and 4 Design: Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Accuracy: ±6 % (EN ISO 6789). Numerical torque value scale. Audible excess-load signal Handle: Kraftform with non-roll feature, multi-component Wera Tools 05074710002 Kraftform 7445 Hexagon Torque Screwdriver, 1/4" Head, 2.5-11.5"/lbs Variabl...
  • Drain Plug Wrench
    Drain Plug Wrench
    Manufacturers Part #: 1418
    Your Price: $29.40
    This wrench is designed to be used for drain plugs on differentials, transmission (auto/manual), transfer cases, and engines.Designed to fit the two most common female drain plug sizes: 3/8" and 1/2" square.Adding a socket to the wrench allows it to be used on male hex drain plugs.Wrench can also be used on serpentine belt tensioners with female 3/8" or 1/2" drive.Manufacturer drop ship. Kastar 1418 Drain Plug Wrench ...
  • 1" Angled Wrench
    1" Angled Wrench
    Manufacturers Part #: 991411
    Your Price: $8.67
    1" Angled Wrench 991411 1" Angled Wrench Sunex SU 991411 1" Angled Wrench ...

Current Reviews: 0