What are locking pliers (Vise-Grips) used for?

Locking pliers, often called Vise-Grips after a popular brand, are versatile hand tools designed to clamp onto materials with a strong, adjustable grip. They're used for holding objects securely while you work on them, clamping materials together for welding or gluing, removing rounded or damaged fasteners, or acting as a temporary handle. Their adjustable clamping force and locking mechanism make them indispensable in automotive repair, metalworking, and general DIY projects.

What are the different types of locking pliers and their applications?

Locking pliers come in various jaw configurations for specific tasks. Curved jaw pliers are general-purpose and grip rounded or irregular shapes well. Straight jaw pliers provide maximum contact on flat surfaces. Long nose pliers are useful for reaching into tight spaces. Sheet metal pliers, like the Vise-Grip 8-inch locking sheet metal tool, have wide, flat jaws for bending and forming sheet metal. Choose the jaw type that best matches the shape of the material you'll be working with.

How do I adjust the clamping force on locking pliers?

Locking pliers feature an adjustment screw at the base of the handle that controls the clamping pressure. Turning the screw clockwise increases the force, while turning it counterclockwise decreases it. It's important to adjust the screw so the pliers grip the object firmly without damaging it. After adjusting, squeeze the handles to lock the pliers in place. Some Vise-Grip models may have slightly different adjustment mechanisms, but the principle is the same.

How do I release locking pliers once they're clamped?

To release locking pliers, there's typically a lever or trigger located on one of the handles. Squeezing or pulling this lever disengages the locking mechanism, allowing the jaws to open. The exact location and operation of the release lever may vary slightly depending on the brand and model of the pliers, but it's usually easy to identify and operate with one hand.

What should I do if my locking pliers are not locking or releasing properly?

If your locking pliers are not functioning correctly, the most common cause is a worn or broken spring. Fortunately, replacement springs are readily available for many Vise-Grip models. Check the spring for any signs of damage or corrosion. Also, ensure that the jaws are clean and free of debris that could interfere with the locking mechanism. If problems persist, the adjusting screw may be damaged and need replacement.

Can locking pliers be used on brake lines, and if so, what precautions should I take?

While locking pliers *can* be used on brake lines in some situations (e.g., clamping off a flexible line), it's crucial to exercise extreme caution. Excessive clamping force can damage the brake line, leading to leaks or complete failure. Use only the minimum force necessary to achieve the desired result. Ideally, use tools specifically designed for brake lines to avoid damage. Always inspect the brake line for damage after using locking pliers and test the brakes thoroughly before driving.

What are some common replacement parts for locking pliers, and how do I replace them?

The most common replacement parts for locking pliers are the springs and adjusting screws. Over time, these components can wear out or break due to repeated use. Replacing them is usually a straightforward process that involves disassembling the pliers, removing the damaged part, and installing the new one. Vise-Grip offers replacement spring packs and adjusting screws for many of their popular models. Always refer to the tool's service manual or online resources for specific instructions.

Are there locking pliers designed for working with sheet metal?

Yes, locking sheet metal pliers are specifically designed for bending, forming, and clamping sheet metal. These pliers typically have wide, flat jaws that distribute pressure evenly across the metal surface, preventing damage or distortion. The Vise-Grip 8-inch locking sheet metal tool is an example of this type of plier. Their locking mechanism allows you to hold the metal securely in place while you work, freeing up your hands for other tasks.

Search

Manufacturers [more]

Vise-Grip | 2078704 | ProPlier Pliers Set - 3-Pc

Name: ProPlier Pliers Set - 3-Pc
Brand: Vise-Grip
SKU: 98750
Price: 40.92 USD
Availability: InStock
Rating: 3 (1 reviews)

larger image

Set includes one each:

6" Long Nose
6" Slip Joint
10" Groove Joint Pliers.

Pliers are constructed of high quality materials to provide exceptional durability.
The machined jaws deliver maximum gripping strength and induction hardened cutting edges stay sharp longer.
ProTouch grips provide extra comfort for less hand fatigue.
Rust-resistant finish.
ProTouch Grips - comfort and reduced hand fatigue.

Irwin Tools Vise-Grip 2078704 3 Piece ProPlier Pliers Set

Other products
Vise-Grip Homepage
Model: 98750
Shipping Weight: 2lbs
Manufacturers Part #: 2078704
Manufactured by: Vise-Grip
Also Known As: VGP2078704, VSG-2078704

We have 25 in stock

Inventory available from other suppliers, prices may be different

$40.92

Add to Cart:

Earn 1% Back On Every Purchase (Rewards Program)

We are Here To Help (Contact Us)

Write Review

This product was added to our catalog on Tuesday 06 February, 2007.

Related Products

ProPlier Groove Joint Pliers - 8 In

Your Price: $14.32

Search

Manufacturers [more]

Categories

Vise-Grip | 2078704 | ProPlier Pliers Set - 3-Pc

$40.92

Related Products

Customers who bought this product also purchased...

Customers Also Shopped For

Customer Service

Popular Manufacturers

Popular Categories