10 Inch Curved Jaw Locking Pliers VGP10CR

Jaw adjustment 0 - 1 7/8"/0 - 48mm.
Wire cutter.
The world`s most versatile tool - used for turning, cutting, tightening, clamping & twisting.
Meets federal specifications GGG-W-00649.
Adjusting screw gives exacting pressure - turn adjusting screw to fit work and squeeze handle with one hand to lock on with tremendous pressure.
Stays adjusted for repetitive use.

Guarded release helps keep work safe and fast

Tooth design that holds - hardened tooth design grips from any angle.
Built tough to last a lifetime - high-grade alloy steels heat treated for maximum toughness and durability.
Involute jaw curve permits user to put tremendous pressure on four points of any style nut or bolt head.

Irwin 4935576 Vise-Grip 10CR 10"/250mm Curved Jaw Locking Pliers

Shipping Weight: 1.17lbs
Manufactured by: Vise-Grip
Toolsource #: 51663
Manufacturers Part #: 10CR
Also Known As: PE4935576, VG10CR, VGP10CR

We have 25 in stock

Inventory available from other suppliers, prices may be different

Write Review

$12.48

Related Products

10 Inch Curved Jaw w/ Wire Cutter VGP10WR

Manufacturers Part #: 10WR
Your Price: $10.48
Jaw adjustment 0 - 1 7/8"/0 - 48mm.Wire cutter. The world`s most versatile tool - used for turning, cutting, tightening, clamping & twisting.Meets federal specifications GGG-W-00649. Adjusting screw gives exacting pressure - turn adjusting screw to fit work and squeeze handle with one hand to lock on with tremendous pressure.Stays adjusted for repetitive use. Guarded release helps keep work safe and fast - guarded release trigger quickly unlocks...
Add to Cart Details
4 Inch Curved Jaw Locking Pliers w/ Wire Cutter VGP4WR

Manufacturers Part #: 4WR
Your Price: $8.60
Jaw adjustment 0 - 1 15/16"/0 - 24mm.Wire cutter. The world`s most versatile tool - used for turning, cutting, tightening, clamping & twisting.Meets federal specifications GGG-W-00649. Adjusting screw gives exacting pressure - turn adjusting screw to fit work and squeeze handle with one hand to lock on with tremendous pressure.Stays adjusted for repetitive use. Guarded release helps keep work safe and fast - guarded release trigger quickly unloc...
Add to Cart Details
5 In Curved Jaw w/ Wire Cutter VGP5WR

Manufacturers Part #: 5WR
Your Price: $10.04
The world`s most versatile tool - used for turning, cutting, tightening, clamping & twisting. Jaw Cacity: 1-1/8" / 29 mmIncludes Wire cutter.Meets federal specifications GGG-W-00649. Adjusting screw gives exacting pressure - turn adjusting screw to fit work and squeeze handle with one hand to lock on with tremendous pressure.Stays adjusted for repetitive use. Guarded release helps keep work safe and fast - guarded release trigger quickly unlocks...
Add to Cart Details
z-sup 7 Inch Curved Jaw Locking Pliers VGP7CR

Manufacturers Part #: 7CR
Your Price: $10.30
Jaw capacity: 1-1/2" / 38 mmIncludes Wire cutter. The world`s most versatile tool - used for turning, cutting, tightening, clamping & twisting.Meets federal specifications GGG-W-00649. Adjusting screw gives exacting pressure - turn adjusting screw to fit work and squeeze handle with one hand to lock on with tremendous pressure.Stays adjusted for repetitive use. Guarded release helps keep work safe and fast - guarded release trigger quickly unloc...
Add to Cart Details
10" Curved Jaw Locking Pliers

Manufacturers Part #: 82041
Your Price: $10.80
10" Curved Jaw Locking Pliers 82041 Locking Plier GearWrench KD 82041 10" Curved Jaw Locking Pliers KD82041 ...
Add to Cart Details
10" Fast Release Curved Jaw Locking Pliers

Manufacturers Part #: 11T
Your Price: $11.72
10" Fast Release Curved Jaw Locking Pliers 11T Fast Release™ Curved Jaw Locking Pliers Features: Self-energizing lower jaw provides 3X more gripping power than traditional locking pliers, with no slipping or stripping. Provides maximum torque without requiring heavy input pressure – jaw mechanism naturally grips tighter as more torque is applied to the tool. One-handed, triggerless release is 2X easier to open than tradition...
Add to Cart Details

Customers Also Purchased:

Slip Joint Pliers - Heavy Duty Wire Cutting Shear - 6 In

Manufacturers Part #: 546
Your Price: $12.44
6" Slip Joint Pliers - Heavy Duty Wire Cutting Shear Heavy-duty design for indutrial use.Thin nose design.Cross hatching on jaws grabs work tightly.Shear-type wire cutter.Precision made of fine polished, high carbon drop forged steel.Patented PermaLock(R) fastener eliminates nut and bolt failures.CHANNELLOCK BLUE(R) comfort grips.Note: CHANNELLOCK BLUE(R) comfort grips are only for hand comfort and improved appearance. They are NOT recommended o...
Add to Cart Details
Diagonal Lap Joint Cutting Pliers - 7In

Manufacturers Part #: 337
Your Price: $16.04
7" Diagonal Lap Joint Cutting Plier only CHANNELLOCK® uses precision machined knife and anvil style cutting edges to ensure perfect mating and superior cutting edge life. The CHANNELLOCK® knife and anvil cutters ensure proper cutting edge alignment, resulting in a clean cut every time. Most manufacturers use two sharp edges which can become misaligned, losing their cutting effectiveness. Experience the difference for yourself. Perfectly ma...
Add to Cart Details
1/2 In Drive 6 Pt Std Metric Impact Socket - 12mm

Manufacturers Part #: 34062
1/2 In Drive 6 Pt Standard Metric Impact Socket - 12mm Made entirely in the U.S.A., featuring quality workmanship and value. The patented SureGripr hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. The new black coating retains more rust preventative compound than black oxide...
Add to Cart Details
Tongue and Groove Pliers - 8 Adjustments - 4 1/4 In Cap - 16 In

Manufacturers Part #: 460
Your Price: $25.13
Right angle teeth that grip in all directions for maximum bite and minimum wear. Patented undercut tongue-and-groove design assures strongest, no-slip jaw action. Patented reinforcing edge minimizes stress breakage.Patented PermaLock(R) fastener eliminates nut and bolt failures.Distinctive CHANNELLOCK BLUE comfort grips. NOTE: CHANNELLOCK BLUE dipped plastic grips are only for hand comfort and improved appearance. They are NOT recommended or war...
Add to Cart Details
Heavy-Duty Bolt Cutter - 24 In

Manufacturers Part #: 57124
Your Price: $48.95
Heavy-Duty Bolt Cutter - 24" Features: 24" length.Equipped with chrome vanadium steel cutting heads. ...
Add to Cart Details
Cable Cutter Solid Joint Pliers - 9In

Manufacturers Part #: 911
Your Price: $23.23
9" Cable Cutter Solid Joint Pliers Heavy-duty design.Made of fine polished, high carbon drop-forged steel.Carefully balanced.Closely mated cutters are scientifically heat treated to hold their edge.Cuts up to 4/0 aluminum and 2/0 soft copper.Not designed for steel....
Add to Cart Details

Customers Also Shopped For:

Replacement Adjusting Screw

Manufacturers Part #: 2071910
Your Price: $4.70
Supersedes Vise-Grip part number 42-07 Replacement adjusting screw for 10R, 10WR, 10CR, 20R, 310S, 12LC, 11R, 11SP, 11HD, 18R, 18SP, 24R, 24SP and 10LW locking tools. Vise-Grip 2071910 Replacement Adjusting Screw ...
Add to Cart Details
# 1 Tap Extractor Set - 6-Pc

Manufacturers Part #: 18001
Your Price: $110.70Includes Free Shipping
Includes: 3/16", 1/4", 5/16", 3/8", 7/16", & 1/2" 4 - Flute Style.Packed in 6 - compartment plastic case.The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. Remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. Tap Extractors will fit both NC and NF taps. Walton 18001 6-Pc #1 Tap Extractor Set ...
Add to Cart Details
Right Angle Polisher 7In 0-4000 RPM

Manufacturers Part #: V716P
Your Price: $308.56Includes Free Shipping
Ideal for polishing and buffing paint, metal, wood, or plastic. It has an adjustable speed control and a unique muffler design. Side handle is standard equipment and fits either the left or right side. Full one year warranty on our products to be free from defects in original material and workmanship. Made in USA. V716P Right Angle Polisher ...
Add to Cart Details
1/4 In Drive Metric Hex Bit Socket - 5mm

Manufacturers Part #: 44328
1/4 In Drive Metric Hex Bit Socket - 5mm Made in the U.S.A., featuring quality workmanship and value. Bit holder features a new through-hole design, which makes it easier to replace worn or broken bits. Simply pop the old bit out and insert a new replacement bit. Bit holder features SoK`s high polish SuperKrome(R) finish, which provides for long life and maximum corrosion resistance. Bits are manufactured to rigid standards using high str...
Add to Cart Details
3/8 In Dr 6 Pt Universal Spark Plug Flex Socket - 5/8 In

Manufacturers Part #: 4480
3/8" Drive 6 Pt Universal Spark Plug Socket - 5/8" Flex Length - 3.28"Diameter - 0.88" ...
Add to Cart Details
3/8 In Drive Socket Extension - 12 In

Manufacturers Part #: 45162
SuperKrome(R) finish provides long life and maximum corrosion resistanceImproved AccessDiamond knurled gripMade in the USALifetime Warranty SK 45162 3/8" Drive Socket Extension - 12" Length ...
Add to Cart Details

Current Reviews: 0

For more information, please visit this product's webpage.

Hand Tools > Pliers > Visegrips > 10 Inch Curved Jaw Locking Pliers VGP10

10 Inch Curved Jaw Locking Pliers VGP10CR

Related Products

Customers Also Purchased:

Customers Also Shopped For: