Power Steering Air Bleed Adapter Kit

Mityvac | Power Steering Air Bleed Adapter Kit | MVA670

Features and Benefits

• Adapters form an airtight seal in the neck of a vehicle's power steering pump, allowing for air evacuation
• All three adapters include an inline, barbed connection for a 1 - 4" internal diameter hose
• These adapters will work with your Mityvac and most other brands hand vacuum pumps
• A 90-degree barbed connector, MVA665, is available separately and can be interchanged with the inline connector on MVA661 and MVA662 for applications with limited overhead access
• Featuring a robust design and construction

Applications

• These adapters are designed for use with power steering systems on vehicles equipped with a manual steering pump.
• They can be used to bleed air from the system after a fluid change or repair, or to troubleshoot a power steering problem.

Benefits

• These adapters make it easy to bleed air from a power steering system.
• They are compatible with a variety of hand vacuum pumps.
• The 90-degree barbed connector allows for use in applications with limited overhead access.
• The adapters are made from durable materials and are built to last.

How to Use

1. Attach the adapter to the power steering pump.
2. Connect a hose to the adapter.
3. Turn on the vacuum pump and allow it to run for several minutes.
4. Turn off the vacuum pump and disconnect the hose.
5. Start the engine and turn the steering wheel from side to side to circulate the fluid.
6. Check the fluid level and add fluid as needed.

Note

• Be sure to follow the manufacturer's instructions for bleeding the power steering system.
• Do not operate the vacuum pump for more than 30 seconds at a time.
• Allow the pump to cool down for at least 1 minute before operating it again.

Order Now and Get Your Power Steering Air Bleed Adapter Kit Today!