What are soft face hammers used for?

Soft face hammers are designed to deliver force without damaging the workpiece. They're commonly used in automotive work for tasks like assembling delicate parts, shaping sheet metal, or freeing stuck components without marring the surface. The softer faces, made of materials like rubber, plastic, or rawhide, absorb the impact and prevent scratches or dents. For instance, a rubber mallet like the Ken-Tool 35310 is excellent for tasks where a non-marring impact is crucial.

What are the different types of soft faces available for hammers?

Soft face hammers come with a variety of face materials to suit different applications. Common options include rubber, plastic (such as nylon or polyurethane), rawhide, and even softer metals like copper or brass. Rubber faces offer good general-purpose protection, while harder plastics provide greater durability for more demanding tasks. The choice depends on the balance between impact force needed and the level of surface protection required. Some hammers, like those from SK Hand Tool, feature replaceable faces, allowing you to switch materials as needed.

What is a dead blow hammer, and when should I use one?

A dead blow hammer contains loose filler material (like sand or shot) inside the head. This design eliminates rebound upon impact, transferring more of the hammer's energy to the workpiece. This is particularly useful when you need to deliver a solid, controlled blow without bouncing, such as when setting bearings or dislodging tight-fitting parts. Dead blow hammers are available with soft faces, combining the benefits of both designs. An example of this is the SK Hand Tool 8766 Soft Face Dead Blow Hammer.

How do I choose the right weight and size for a soft face hammer?

The appropriate weight and size of a soft face hammer depend on the task at hand. For delicate work, a lighter hammer like the GearWrench 82260 12 oz. Soft Face Hammer provides better control and reduces the risk of damage. For heavier tasks requiring more force, a larger, heavier hammer is more suitable. Consider the size and accessibility of the workspace as well; a longer handle provides more leverage but may be unwieldy in tight spaces. Choose a weight that allows you to swing comfortably and maintain accuracy.

Can I replace the faces on my soft face hammer?

Many soft face hammers are designed with replaceable faces, allowing you to extend the life of the tool and adapt it to different applications. Replacement faces are typically available in various materials and hardness levels. Check the manufacturer's specifications for your specific hammer model to ensure you purchase the correct replacement faces. The Nupla 15174 1.75" Soft Face Tip is an example of a replacement face available. Proper installation is crucial to prevent the faces from dislodging during use.

Are soft face hammers suitable for striking hardened steel?

While soft face hammers can be used on some metal surfaces, they are generally not recommended for striking hardened steel directly. The softer face material can deform or break down under the high impact forces, potentially damaging both the hammer and the workpiece. For striking hardened steel, use a hammer specifically designed for that purpose, such as a steel hammer with a hardened head. If you must use a soft face hammer on metal, choose the hardest face material available and use caution.

What safety precautions should I take when using a soft face hammer?

As with any hand tool, always wear appropriate personal protective equipment (PPE) when using a soft face hammer, including safety glasses to protect your eyes from flying debris. Ensure the hammer head is securely attached to the handle before each use. Avoid striking the same spot repeatedly with excessive force, as this can still cause damage, even with a soft face. Inspect the hammer faces regularly for wear and replace them as needed.

What is the difference between a mallet and a soft face hammer?

The terms 'mallet' and 'soft face hammer' are often used interchangeably, but there are subtle differences. Generally, a mallet has a larger, often cylindrical head made entirely of a softer material like rubber or wood. A soft face hammer, on the other hand, typically has a metal head with replaceable soft faces attached. Mallets are often used for woodworking or shaping sheet metal, while soft face hammers are more versatile for automotive and general-purpose applications where a balance of force and surface protection is needed. The Ken-Tool 35310 is a good example of a rubber mallet.

Search

Manufacturers [more]

Nupla Corporation | 15174 | 1.75" Soft Face Tip Green Tough

Name: 1.75" Soft Face Tip Green Tough
Brand: Nupla Corporation
SKU: 145556
Price: 7.57 USD
Availability: Discontinued
Rating: 3 (1 reviews)