Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Shop Equipment and Supplies > Adhesive - Tapes - Ties > Snap Rings > Snap Ring Remov

Snap Ring Remover

Snap Ring Remover
Snap Ring Remover J-28585

Tool Number: J-28585
Tool Name: SNAP RING REMOVER
Applications: Medium Duty Truck


Kent-Moore KM J-28585 Snap Ring Remover
  • Manufactured by: Kent-Moore
  • Toolsource #: 112314
  • Manufacturers Part #: J-28585
  • Also Known As: KMJ28585

Only 2 left in stock - order soon

$78.86

Frequently bought together:


Related Products


Customers Also Purchased:

  • Bushing and Bearing Remover - (3-4 inch)
    Bushing and Bearing Remover - (3-4 inch)
    Manufacturers Part #: J-26941
    Your Price: $185.72Includes Free Shipping
    Tool Number: J-26941 Tool Name: Bushing and Bearing Remover - (3-4 inch) Applications: 2010 Camaro with Aisin or Tremec Transmission The rear seal on manual transmissions is installed deep into its bore in the extension housing. J-26941 is used with either a slide hammer or J-45124 Puller Bridge to remove the seal without scratching the bore. Kent-Moore KM J-26941 Bushing and Bearing Remover - (3-4 inch) ...
  • Axle Remover Wedge
    Axle Remover Wedge
    Manufacturers Part #: J-42562
    Your Price: $226.52Includes Free Shipping
    Axle Remover Wedge J-42562 Tool Number: J-42562 Tool Name: AXLE REMOVAL WEDGE Applications: 97 H,W,U W/4T60E H, W, U W/4T60E The "C" ring that retains the output shaft to the carrier assembly has changed to a compression ring which cannot be removed with current J 34757. Kent-Moore KM J-42562 Axle Remover Wedge ...
  • Clutch Pilot Bearing Remover
    Clutch Pilot Bearing Remover
    Manufacturers Part #: J-23907
    Your Price: $158.35Includes Free Shipping
    Kent-Moore Tools Kent-Moore J-23907 Clutch Pilot Bearing Remover for GM / Nissan. Universal, ST, MT, A/TA, a 2-Jaw bearing puller. Use with J-6125-1B slide hammer. Applications: AVEOST, MT, A/TA. 1000 & 2000 Product Families, AT 500, MT 600, MT 650, HT(B) 700 and CL(B)T 700, HT(B) 750, CL(B)T 750, 3000 SERIES, B200, B300, B400, T200, and T300, 3700 (formerly 3070PT), 4000 SERIES, B500, T400, and T500, 4700/4800 (formerly 4070/4076), M&a...
  • Slide Hammer
    Slide Hammer
    Manufacturers Part #: J-6125-1B
    Your Price: $138.97Includes Free Shipping
    Has a 3/8"-16 threaded end and a 1lb. hammer weight.Includes a 5/16"-18 adapter (J-6125-11).Two J-6125-1B and two J-6125-11 tools are included in the J-6125-B Slide Hammer Set, available separately. Kent-Moore J-6125-1B Slide Hammer ...
  • Spring Compressor Adapter 5L40, 6L50, 6L80, 6L90
    Spring Compressor Adapter 5L40, 6L50, 6L80, 6L90
    Manufacturers Part #: J-38734
    Your Price: $57.05
    Applications: 5L40, 6L50, 6L80, 6L90 Used to compress various springs in the 6L80 transmission using a press or similar compressor. Kent-Moore J-38734 Compressor Adapter ...
  • Automatic Transmission Clutch-Spring Compressor
    Automatic Transmission Clutch-Spring Compressor
    Manufacturers Part #: 2398
    Your Price: $136.67Includes Free Shipping
    Features: Tool compresses automatic-transmission clutch springs on some GM, Ford, Toyota and other transmissions.It permits easy removal and installation of snap rings.Job can be completed without removing center shaft and clutch assembly from transmission housing.To use, force legs in and catch jaws inside transmission drum groove. Loosen wing nuts and adjust pushers. Tighten screw until lock ring is free to be removed. GearWrench 2398 Automati...

Customers Also Shopped For:

  • Axle Remover Wedge
    Axle Remover Wedge
    Manufacturers Part #: J-42562
    Your Price: $226.52Includes Free Shipping
    Axle Remover Wedge J-42562 Tool Number: J-42562 Tool Name: AXLE REMOVAL WEDGE Applications: 97 H,W,U W/4T60E H, W, U W/4T60E The "C" ring that retains the output shaft to the carrier assembly has changed to a compression ring which cannot be removed with current J 34757. Kent-Moore KM J-42562 Axle Remover Wedge ...
  • GM Output Shaft O-Ring Remover 6T70
    GM Output Shaft O-Ring Remover 6T70
    Manufacturers Part #: J-34757
    Your Price: $330.43Includes Free Shipping
    Used to remove and install retaining rings for servicing or replacement of the axle shaft or stub shaft when disassembling the 6T70 transaxle.Applications: 3T40, 4T60, MT, TC Non-stock item, manufacturer drop ship; please email service@toolsource.com for cost and lead time before ordering. This is a non-quoted item and the price fluctuates; we have to get pricing each time an order is placed. Kent-Moore J-34757 GM Output Shaft O-Ring Remover ...
  • Press Accessory Set for 17 1/2 Ton Press
    Press Accessory Set for 17 1/2 Ton Press
    Manufacturers Part #: 1880
    Your Price: $361.19Includes Free Shipping
    Adapters & accessories are attached to the ram`s forcing screw or used on the press bed to support the work.With these accessories, makeshift pressing setups are nearly eliminated.Weight: 21 lbs. 10 oz. Set Includes: OTC No. 1123 - Bearing pulling attachment.OTC No. 201923 - Ram pushing adapter w/ 1/2" diameter shank.OTC No. 201454 - Ram pushing adapter w/ 3/4" diameter shank.OTC No. 34806 - V pushing adapter.OTC No. 1890 - Pair of V blocks. OTC...
  • Air Chisel Pneumatic Muffler/Tailpipe Remover Bit
    Air Chisel Pneumatic Muffler/Tailpipe Remover Bit
    Manufacturers Part #: 31965
    Your Price: $9.02
    Replaces previous part number 1965 Designed to separate telescoped tubing without damage to the inner section. This tool has the exclusive Oldforge CURL-CUT. Old Forge 31965 Muffler and Tailpipe Remover ...
  • Battery Lifter
    Battery Lifter
    Manufacturers Part #: S520
    Your Price: $11.31
    May be used to lift and install side and top terminal batteries. Non-slip rubber pads tightly grip sides of batteries. Will pick-up batteries 4 1/2" to 7 1/2" wide, including group 65 batteries. Weight: 2 lbs. ea. EZ Red S520 Battery Lifter ...
  • disc. U-Joint Snap Ring Pliers
    disc. U-Joint Snap Ring Pliers
    Manufacturers Part #: 70300
    Your Price: $21.56
    Unique jaw design allows the technician to easily remove Hotchkiss style snap rings with one hand.Quickly & easily remove trim clips on domestic and import cars.Excellent for inner fender liner clips.Removes body molding trim clips without breaking them. Tiger Tool 70300 U-Joint Snap Ring Pliers ...

Current Reviews: 0