Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Hand Tools > Pullers > Slide Hammer > The Slugger Heavy Duty Slide Hammer w/ Tool B

The Slugger Heavy Duty Slide Hammer w/ Tool Box

The Slugger Heavy Duty Slide Hammer w/ Tool Box
  • Perfectly designed for the toughest repair applications.
  • 10 lb. slide weight designed for in-line impact. Balanced for continued use without fatigue.
  • Special hand-fit weight for ease of work.
  • Dual hammer action for reverse or direct reconstruction blows.
  • Quick assembly for applied hook-ups on fender edges, bumper ends, rocker panels, aligning doors and door edges, hoods and hood hinges, trunk and trunk hinges, headlights and many more applications.
  • Rubberized hand-hold for good grip and safety.
  • All parts easily stored on permanent board.
  • Supplied with exclusive lock nut to keep attachments from rotating.
  • The most complete set available! 10 of the latest and most modern engineered body pulling and pushing attachments. Consists of 16 different parts.
Consists of the following:
  • Model No. 81001 - Slide Hammer
  • Model No. 81002 - Slide Shaft
  • Model No. 81007 - Hand Grip
  • Model No. 81009 - Screw Puller Assembly
  • Model No. 81010 - Adapter
  • Model No. 81011 - Nose Cone
  • Model No. 81012 - Screw
  • Model No. 81013 - Chain Hook Assembly
  • Model No. 81015 - Hook Holder
  • Model No. 81016 - Grab Hook
  • Model No. 81017 - Chain
  • Model No. 81020 - Coupling
  • Model No. 81021 - Offset Blade
  • Model No. 81024 - Pipe Blade Assembly
  • Model No. 81025 - Pipe Blade
  • Model No. 81026 - Double Coupling
  • Model No. 81027 - Thin Hook
  • Model No. 81030 - Large Hook
  • Model No. 81033 - Small Hook
  • Model No. 81036 - Straight Hook
  • Model No. 81039 - Claw Hook
  • Model No. 81042 - Lock Nut
  • Tool Box Included.
S & G Tool Aid 81100 "The Slugger" Heavy Duty Slide Hammer
  • Shipping Weight: 30lbs
  • Manufactured by: S & G Tool Aid
  • Toolsource #: 58542
  • Manufacturers Part #: 81100
  • Also Known As: SG81100, SGT-81100, SGT81100, TA81100

Only 2 left in stock - order soon

Inventory available from other suppliers, prices may be different

List Price: $185.00
You save: $11.71
$173.29

Frequently bought together:


Related Products

  • Flywheel Lock - Volkswagen & Porsche
    Flywheel Lock - Volkswagen & Porsche
    Manufacturers Part #: 80350
    Your Price: $13.49
    This universal flywheel lock has been designed for use on all air-cooled Volkswagen engines (type 1, 2, 3, & 4) and on all air-cooled Porsche engines (series 356, 912, 914, & all 911s through 1969). This tool is a must when changing a flywheel or its seal and it comes in handy when changing a clutch. Made from a forging, this quality tool will last a lifetime....
  • Clutch Alignment Tool - Volkswagen
    Clutch Alignment Tool - Volkswagen
    Manufacturers Part #: 81251
    Your Price: $8.75
    This clutch alignment tool has been designed to center the clutch disk with the pressure plate when it is installed. If this is not done accurately the gearbox mainshaft will not be able to locate the splines of the clutch disk hub, and it will be impossible to fit the gearbox to the engine. The use of this tool is a must whenever changing a clutch. It is made of glass filled nylon for strength and held to exact tolerances for an ideal fit. ...
  • CIS Fuel Injector Puller - Volkswagen Porsche & Audi
    CIS Fuel Injector Puller - Volkswagen Porsche & Audi
    Manufacturers Part #: 83400
    Your Price: $7.02
    This handy tool has been developed to easily remove CIS fuel injectors on many in-line engines including all gasoline water-cooled Volkswagen, Porsche 924, and Audi automobiles.In operation, this tool fits down around the injector base and with the use of a screwdriver as a lever it "pops" out the injector eliminating possible damage to the injector hose and to one`s hands.Made from quality steel, this tool comes with a SP High Tech black finish...
  • Clutch Adjusting Wrench - Volkswagen
    Clutch Adjusting Wrench - Volkswagen
    Manufacturers Part #: 86250
    Your Price: $6.45
    This slick tool has been designed to simplify the task of adjusting clutch cables on air-cooled VW`s having wing nuts. This tool has four gripping areas, rather than the wing nut`s two, which provide for greater leverage and ease in turning the nut. Made of quality steel, this tool comes with a black finish. ...
  • VW Audi Volkswagen Tension Pulley Spanner Wrench SP Tools
    VW Audi Volkswagen Tension Pulley Spanner Wrench SP Tools
    Manufacturers Part #: 86400
    Your Price: $16.70
    This tool, for use on VW`s and Audi`s, has been designed to allow for the easy adjustment of the camshaft spur belts having idler pulleys with pin holes. In operation, this spanner wrench with its protruding pins, grips the center of the idler pulley and rotates it around its off-center retaining bolt. This rotation then allows for camshaft spur belt tension adjustment. Made from heat treated alloy steel, this unique tool comes with a black fini...
  • Strut Shock Lower Nut Socket - VW & Audi
    Strut Shock Lower Nut Socket - VW & Audi
    Manufacturers Part #: 87300
    Your Price: $13.35
    Unique tool has been designed to allow for the easy removal and installation of the shock retaining nuts used on most front wheel drive Volkswagens and Audi`s.Removal of the lower nut is difficult as it is round on the outside and only has a slot across the top for gripping. The shock shaft can also rotate and must be held from turning when the nut is removed or installed. Has a slot drive to fit the slot in the top of the lower retaining nut, an...
  • Bench Head Stand
    Bench Head Stand
    Manufacturers Part #: 88150
    Your Price: $33.45
    For use on Aluminum & Steel Heads This premium head stand has been designed for use on most all cylinder heads. In operation, it holds the head off the bench for valve work, head cleaning and assembly. Its holding rods have a long 5 inch taper which allows them to go further into the stud hole for more contact in the hole and a firmer grip on the head. These holding rods are also heat treated to remain smooth for use on aluminum heads. This un...
  • Valve Adjusting Tools - Toyota & Lexus
    Valve Adjusting Tools - Toyota & Lexus
    Manufacturers Part #: 88250
    Your Price: $28.22
    This unique tool has been designed to allow for easy valve adjustment on most Toyota`s overhead camshaft engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action then moves the shim and its valve lifter down awayfrom the camshaft lobe. In this down position the separate wedge tool is placed between the valve lifter ledge and ...
  • Replacement Spacer Wedge - Toyota & Lexus
    Replacement Spacer Wedge - Toyota & Lexus
    Manufacturers Part #: 88251
    Your Price: $6.55
    This unique tool has been developed to allow for easy valve adjustment on most Toyota`s overhead camshaft engines using spacer shims for valve adjustment. Made from quality heat treated alloy steel. Schley 88251 Replacement Spacer Wedge (6 & 7 mm) for Toyota & Lexus ...

Customers Also Purchased:

Customers Also Shopped For:

  • Heavy Duty Slide Hammer Hand Grip
    Heavy Duty Slide Hammer Hand Grip
    Manufacturers Part #: 81007
    Your Price: $1.61
    Hand Grip for "The Slugger" Heavy Duty Slide Hammer. Rubberized hand-hold for good grip and safety. S & G Tool Aid 81007 Heavy Duty Slide Hammer Hand Grip ...
  • AccuTorq Torq Bar - 21mm 60 ft-lbs- Black
    AccuTorq Torq Bar - 21mm 60 ft-lbs- Black
    Manufacturers Part #: 10-0309
    Your Price: $26.89
    Solid one piece construction of AccuTorq automotive and commercial truck sockets eliminate the wide torque variances unavoidable with socket extensions and adapters.Patented AccuTorq "strobe marks" stop turning at precisely the correct torque EVERY time. There is no "guess" work and no recalibration.AccuTorq provides deep-well sockets for those special applications where regular socket depth is just not enough to get the job done.LIFETIME WARRAN...
  • DRILL-OUT(R) Screw Extractor Set - 4-Pc #5/#6, #8, #10/#12 & 1/4
    DRILL-OUT(R) Screw Extractor Set - 4-Pc #5/#6, #8, #10/#12 & 1/4
    Manufacturers Part #: P450
    Your Price: $39.03
    4 Piece DRILL-OUT(R) Screw Extractor Set Removes the following sizes: #5(1/8"), #6, #8, #10, #12 and 1/4" Standard; M6, M8, M10 and M12 Metric. The DRILL-OUT(R) is a drill bit AND extractor in one and is engineered with a Winslow self-centering tip. Each tool is specially designed to drill into rough surfaces that are caused when bolts break. The DRILL-OUT(R) tip not only gives you complete control-it allows you to obtain a perfectly centered ...
  • TIF 9010A SlimLine Electronic A/C Refrigerant Charging Scale
    TIF 9010A SlimLine Electronic A/C Refrigerant Charging Scale
    Manufacturers Part #: 9010A
    Your Price: $167.63Includes Free Shipping
    TIF 9010A - A revised and updated version of the classic TIF Slimline scale, the TIF9010A brings greater performance, reliability and usability to the trade. With the greatest resolution in the industry, and no compromise on capacity, this unit offers features and specs that you won`t want to do without. Touch Key controls.Three display modes - Lbs./oz.; Decimal Lbs., Kilograms.Very High Resolution - 0.1 oz./0.005 Lbs./2 grams.Extreme Accuracy.1...
  • 1/2 In Dr Impact Socket, 6 Pt, Std, 13/16 In
    1/2 In Dr Impact Socket, 6 Pt, Std, 13/16 In
    Manufacturers Part #: 226
    Your Price: $4.13
    1/2" Drive Impact Socket, 6 Point, Standard, Size 13/16" Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Lifetime Warranty -- full replacement. ...
  • 3/8 In Dr Impact Socket, 6 Pt, Deep, 15mm
    3/8 In Dr Impact Socket, 6 Pt, Deep, 15mm
    Manufacturers Part #: 315MD
    Your Price: $3.67
    3/8" Drive Impact Socket, 6 Point, Deep, Size 15mm Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Lifetime Warranty -- full replacement. ...

Current Reviews: 0