Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Hand Tools > Pullers > Slide Hammer > No. 10 Nokker Kit Mounted on Boa

No. 10 Nokker Kit Mounted on Board

No. 10 Nokker Kit Mounted on Board
No. 10 Nokker Kit Mounted on Board

Our best kit!
Features our most used attachments:
  • BS-1R Reversed Hook
  • BS-16 Round Hook Set

And also features our newest attachments:

  • BS-15 Mo-clamp 3100 Series Hook Adapter
  • BS-14 Locking Pliers Puller
Morgan Manufacturing Company  10KIT No. 10 Nokker Kit- Mounted on Board 
  • Shipping Weight: 30lbs
  • Manufactured by: Morgan Mfg Inc.
  • Toolsource #: 135332
  • Manufacturers Part #: 10KIT
  • Also Known As: MM10KIT

Only 1 left in stock - order soon

$236.09

Frequently bought together:

  • Add this item to your cart and save $4.18 when purchased with the product above.
    Discount applied at checkout.

Related Products


Customers Also Purchased:

  • Chain Hook
    Chain Hook
    Manufacturers Part #: BS-2
    Your Price: $27.84
    Morgan Mfg  Inc. BS-2 Chain Hook  ...
  • Door Adjuster
    Door Adjuster
    Manufacturers Part #: 65800
    Your Price: $39.60
    Door Adjuster Features: Adjusts door hinges on most cars & light trucks.Will adjust doors w/ either bolted or welded hinges.Simply slide pin end of tool into door latch & close door until tool engages door striker.Now raise or lower tool handle to align door.Comes w/ two-headed pin adapter for both large & small latches.Specially designed handle, for optimum leverage.Makes adjustment fast & easy.Boxed.Shipping weight 5 lb 2 oz. ...
  • BS-19 Frame Hammer Attachment
    BS-19 Frame Hammer Attachment
    Manufacturers Part #: BS-19
    Your Price: $58.33
    BS-19 Frame Hammer Attachment  BS-19   An extremely useful and sturdy attachment for making body & frame repairs in areas with bends and kinks that are not accessible with a regular hammer. The backside of rear frame rails around the spare tire pocket is a prime application for this tool. The "Frame Hammer" attachment allows the technician to reach these areas and tap them flat with controlled strikes while making a pull. The slight...

Customers Also Shopped For:

  • Pull Rod Set
    Pull Rod Set
    Manufacturers Part #: 20000
    Your Price: $33.47
    "The Original" Super tough alloy steel is precisely heat-treated for maximum strength.Factory tested under a 500 pound (228 kg) load.Vinyl coated handle is comfortable to use.Use two at a time for pulling. Set Includes: 4 Pull Rods 2 Pick Pulls1 Stainless Steel Straight Edge1 HS Split Point Drill Bit1 Instruction Sheet Steck 20000 Pull Rod Set ...
  • Heavy Duty Slide Hammer Thin Hook
    Heavy Duty Slide Hammer Thin Hook
    Manufacturers Part #: 81027
    Your Price: $10.85
    Heavy Duty Slide Hammer Thin Hook Thin Hook for "The Slugger" Heavy Duty Slide Hammer. ...
  • Junior Slugger Slide Hammer Dent Puller
    Junior Slugger Slide Hammer Dent Puller
    Manufacturers Part #: 81500
    Your Price: $33.28
    The finest shop engineered heavy duty slide hammer with 3 lb. slide weight. Features a soft vinyl "Hang-It" handle grip for easy storage and shock cushioning. Special wide aircraft steel body hook is used to pull curls and creases in quarter, rocker, back and door panels. "L" hook, broached nose cone, two jam nuts and two hardened pulling screws are supplied. Designed for the professional body technician - a LIFETIME tool. Total weigh...
  • 8-Way Slide Hammer Puller Set
    8-Way Slide Hammer Puller Set
    Manufacturers Part #: 7947
    Your Price: $196.40Includes Free Shipping
    You can pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. Jaws can be set up for 2/3 way internal or external pulling jobs. Includes: Slide hammer with 5 lb. hammer, rear axle pulling attachment, 3-way cross-head, cone, 2-way cross-block, puller hook attachment, pulling jaws (3) for internal or external pulling jobs, grip wrench adapter with single lead (wrench not included) and a dent puller attachment.Also ...
  • 10-Way Slide Hammer Puller Set
    10-Way Slide Hammer Puller Set
    Manufacturers Part #: 7948
    Your Price: $322.44Includes Free Shipping
    You can pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. Jaws can be set up for 2/3 way internal or external pulling jobs. Includes: No. 1155 - Slide hammer w/5 lb. hammerNo. 7372 - Rear axle pulling attachmentNo. 24544 - 3-way cross headNo. 24545 - ConeNo. 27241 - 2-way cross blockNo. 27315 - Puller hook attachmentNo. 34698 - Pulling jaws (3) for internal or external pulling jobsNo. 205378 - Grip wrench ada...
  • Puller Step Plate Adapter 1-1/8 & 7/8 In Dia
    Puller Step Plate Adapter 1-1/8 & 7/8 In Dia
    Manufacturers Part #: 8058
    Your Price: $15.05
    Necessary for pulling and installing bearings, gears or other parts found on hollow shafts or housings. They may be used with Grip-o-Matic® pullers and Push-Pullers as well as shop presses.Dia. "A" 1-1/8" Dia "B" 7/8" OTC 8058 Puller Step Plate Adapter ...

Current Reviews: 0