12 X 8mm SLOT PUNCH - Alemite

Features and Benefits:

• CUTS UP TO 10 GA MILD STEEL
• 12 X 8mm SLOT PUNCH
• 12mm bolt / �4mm offset

Turn any 1/2" [12mm] hole into a precise and clean 8mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces less than 1.5" [38mm]. Use this tool to quickly and cleanly slot subframe or control arm bracket holes allowing adjustment unavailable from the factory.