Scrapers
Scrapers remove old gasket material, carbon, paint, adhesive, decals and other buildup from a surface so parts can be cleaned, inspected or sealed again. This category covers rigid and flexible hand scrapers, offset scrapers, brass scrapers, razor blade scrapers, mini scrapers for tight spots, debris scrapers and replacement blades.
Choosing the right type
Rigid scrapers push through hard, baked-on gasket material and carbon, while flexible blades follow a surface and suit softer buildup such as sealant and adhesive. Offset handles keep knuckles clear of a flat surface like a cylinder head or oil pan flange. Brass scrapers are softer than steel, which makes them a good choice on aluminum and other soft surfaces that a steel blade could gouge. Razor blade scrapers take decals, tape residue and paint off glass and smooth panels. Mini scrapers and narrow blades reach into grooves and around studs.
Using them
Hold the blade at a low angle and push with steady, short strokes, letting the edge lift the material rather than digging in. On sealing surfaces, scratches or gouges across the face can cause leaks later, so work with the surface and stop once the material is gone. Soaking stubborn gasket material with a gasket remover first makes the job faster. Scrape away from your body, keep the free hand behind the blade, and change dull or chipped blades, since a dull blade takes more force and slips more easily.
Blades and care
Many scrapers take replacement blades, so a worn edge can be swapped in seconds. Store scrapers with a blade cover or in a drawer slot so the edge stays sharp.
Auto repair technicians and engine builders use scrapers to prepare gasket surfaces, body shops and detailers use razor scrapers on glass and decals, and industrial maintenance crews and DIY users use them for general cleanup. Brands we carry here include Mayhew, Titan, Lisle, Bahco, ATD and VIM.

























































Follow us on social media