Portable Pressure Blast System 250 Lb Capacity w Safety Shut Off - Dee-Blast

Same as DB02500 with Safety Shut Off System
Dee-Blast Portable Pressure Blasters are designed to make the most efficient use of your compressed air and abrasive supply. These are not siphon units. The tank is filled with air and blast media under pressure. When the valve is opened, the media/air mixture is released under tremendous pressure. This operation quickly removes rust, paint, scale and other coatings. Pressure blasters are 3 to 5 times faster than siphon fed machines.

• Uses most medias such as steel grit, c-garnet, aluminum oxide, glass bead and smaller diameter steel shot.
• Larger nozzles are available for course media that may clog nozzle.
• Removes rust, scale, paint, from steel, fiberglass, wood and plastic.
• Used for auto, truck, boat, motorcycle repair, building and plant maintenance and restoration.
• Includes Ceramic Nozzle, 25' Sandblast Hose, Air Gage. Simply fill with abrasive and attach to your air supply and you are ready to begin blasting. Optional deadman valve available.
• Compressed air and blast media required-sold separately.

Specifications:

• Operating Pressure: 60-125 psi
• A.S.M.E Coded Vessel: YES
• Sandblast Hose: 25'
• Abrasive Capacity: 250-300 lb.
• Nozzle Size 1/4"
• Working Pressure: 90 to 125 P.S.I.
• Two 10" Wheels

NOZZLE SELECTION CHART

ORIFICE SIZE CFM REQUIRED COVERAGE RATE sq./ft./minute 3/32" 7 0.5 1/8" 15 1 3/16" 40 2 1/4" 80 2.5

Safety Shut off standard on model DBO2500RC

$85 standard freight fee. Applies to direct shipping points within the 48 continental US states. Rural Area Surcharge may apply.

• *An additional $40.00 will apply to all residential deliveries of heavy-equipment.
• *For lift-gate service, add $135.00.

Manufacturer drop ship.

Dee-Blast DB02500RC Portable Pressure Blast System Model 2500 with Safety Shut Off System