Multi-side bolt puller set, up to 150 mm spread and 270 mm reach

The multi-side bolt puller set K-68-C is used for pulling components with threaded holes. The pull and press set impresses with the KUKKO Power Nut Technology integrated into the crossbar, allowing force to be applied that could otherwise only be achieved through hydraulics. The position of the power nut can be changed instantly with the push of a button. If the power nut is mounted above the crossbar, increased tension force is achieved. If the power nut is positioned below the crossbar, the pressure force is increased. Three small magnets are attached to the base of the crossbar, which serve to align and fix the power nut. The multi-crossbar allows up to three side bolts to be installed for even more uniform force distribution. For precise adjustment assistance, there is a scale with numerical values on the crossbar. Various pressure pieces can be used for individual adaptation to the shaft.
The sentence covers a variety of common standard threads for adapting the puller device.
The multi-traverse of series 68 allows for the removal over two or three threads in the component to be disassembled.