Dowel Puller Kit - Replacement and Optional Collet 12mm - K-Line Industries

Dowel Puller Kit

Slide hammer type puller removes dowel pins from cylinder heads, blocks,
crankshafts, flywheels, etc. Fast and easy. Simply mount the correct size collet
on the shaft, place over the dowel pin, use a downward motion with the sliding
weight to lock the collet and an upward motion to pull the dowel. To release
the collet, insert into the release stand and tap downward on the shaft end with a
small hammer. NOTE: Collets and Mandrel are equipped with 1/2 - 20 threads.

Replacement and Optional Collet

Size: 12mm