Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Hand Tools > Pullers > Pullers and Pushers > Flange Type Puller S

Flange Type Puller Set

Flange Type Puller Set
  • A versatile puller capable of removing a wide variety of components having tapped pulling holes, including harmonic balancers & timing gears.
  • Furnished cap screws can be positioned to handle bolt circle diameters from 1 1/2" to 4 5/8".
  • A plastic storage tray w/ cover helps keep set components organized for easy selection.
  • Weight: 6 lbs. 10 oz.


    • Includes Three Each of the Following Cap Screw Sizes:
    • 1/4"-28 x 3" lb.
    • 3/8"-24 x 1 1/2" lg.
    • 3/8"-16 x 2" lg.
    • 3/8"-16 x 3" lg.
    • 3/8"-16 x 4 1/2" lg.
    • 5/16"-24 x 3" lg.
    • 5/16"-18 x 3 1/2" lg.
    • 5/16"-18 x 6" lg.
    • M8 x 1.25 x 45 mm lg.
    • M8 x 1.25 x 65 mm lg.
    • M8 x 1.25 x 90 mm lg.
    • M10 x 1.5 x 35 mm lg.
    OTC 7790 Flange Type Puller Set
    • Shipping Weight: 5.9lbs
    • Manufactured by: OTC Tools and Equipment
    • Toolsource #: 62221
    • Manufacturers Part #: 7790
    • Also Known As: OT7790, OTC-7790, OTC7790

    Only 1 left in stock - order soon


    $132.49

    Frequently bought together:

    • Add this item to your cart and save $8.88 when purchased with the product above.
      Discount applied at checkout.

    Related Products

    • Front Hub Puller for 4WD Vehicles
      Front Hub Puller for 4WD Vehicles
      Manufacturers Part #: 7901
      Your Price: $124.74
      Front Hub Puller for 4WD Vehicles Needed to remove the front hub assembly when wheel bearing or brake rotor service is required. Services 3/4- and 1 -ton 4WD pickups with 8-bolt hubs: 1994 and newer Dodge Ram and 1988 and newer Chevrolet and GM. For maxi- mum pulling force, use OTC`s No. 7703 10-lb. slide hammer. Wt., 5 lbs. ...
       Add to Cart  Details 
    • Crankshaft Balancer Puller Adapter Set for GM
      Crankshaft Balancer Puller Adapter Set for GM
      Manufacturers Part #: 7911
      Crankshaft Balancer Puller Adapter Set for GM Includes shulder bolts and spacer adapter. Wt., 8 oz. ...
    • Crankshaft Balancer Puller Kit for GM
      Crankshaft Balancer Puller Kit for GM
      Manufacturers Part #: 7912
      Your Price: $103.50
      Everything you need to pull harmonic balancers with three tapped holes.The shoulder bolts are designed to prevent them from being installed too deply, protecting the crank sensor and/or interrupter rings from damage.The spacer adapter gives the puller`s forcing screw something to push against.The kit works on 1990 and newer 3300 and 3800 V-6 engines.Includes No. 518 Flange-type Puller and No. 7911 Adapter Set.The 7911 Adapter Set consists of the...
       Add to Cart  Details 
    • GM Steering Wheel Puller Legs
      GM Steering Wheel Puller Legs
      Manufacturers Part #: 7929A
      Your Price: $22.03
      Legs do the work of three separate Kent-Moore tools: J-42120, J-42578, and J-36541-A.GM eliminated the tapped holes in the steering wheel assembly on late model cars and vans, making these puller legs the only way to remove the wheel without damage. They`re used with OTC steering wheel puller No. 7245 or 7403 to get behind the steering wheel assembly to give a straight, even pull. Works on: Pontiac: 1988-93 Lemans; 1997-current Grand Prix, Tran...
       Add to Cart  Details 
    • Ford Vacuum Front Hub Release Tool Set w/ Puller
      Ford Vacuum Front Hub Release Tool Set w/ Puller
      Manufacturers Part #: 7932
      Ford Vacuum Front Hub Release Tool Set For CV joint, ball joint, and wheel bearing sensor service, the only way to remove Ford`s new vacuum hub without breaking it is with this tool set. Hubs are plastic, standard removal tools simply will not pull them without damage. Removal clips slip into the slots on the hub to release the connection, puller contains the clips and hub for removal. Designed for 1998 and newer 4X4s with vacuum front hubs: Ra...
    • 8-Way Slide Hammer Puller Set
      8-Way Slide Hammer Puller Set
      Manufacturers Part #: 7947
      Your Price: $206.76
      You can pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. Jaws can be set up for 2/3 way internal or external pulling jobs. Includes: Slide hammer with 5 lb. hammer, rear axle pulling attachment, 3-way cross-head, cone, 2-way cross-block, puller hook attachment, pulling jaws (3) for internal or external pulling jobs, grip wrench adapter with single lead (wrench not included) and a dent puller attachment.Also ...
       Add to Cart  Details 
    • 10-Way Slide Hammer Puller Set
      10-Way Slide Hammer Puller Set
      Manufacturers Part #: 7948
      Your Price: $341.73
      You can pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. Jaws can be set up for 2/3 way internal or external pulling jobs. Includes: No. 1155 - Slide hammer w/5 lb. hammerNo. 7372 - Rear axle pulling attachmentNo. 24544 - 3-way cross headNo. 24545 - ConeNo. 27241 - 2-way cross blockNo. 27315 - Puller hook attachmentNo. 34698 - Pulling jaws (3) for internal or external pulling jobsNo. 205378 - Grip wrench ada...
       Add to Cart  Details 
    • Puller Adapter 5/8-18 Female To 1/4-20 Male
      Puller Adapter 5/8-18 Female To 1/4-20 Male
      Manufacturers Part #: 8000
      Your Price: $15.25
      Male-Female Threaded Adapters For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc. Female end 5/8" - 18, Male end 1/4" - 20, Length 2 1/4" ...
       Add to Cart  Details 
    • Puller Adapter 5/8-18 Female To 5/16-18 Male
      Puller Adapter 5/8-18 Female To 5/16-18 Male
      Manufacturers Part #: 8001
      Your Price: $26.53
      Male-Female Threaded Adapters For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc. Female end 5/8" - 18, Male end 5/16" - 18, Length 2 1/4" ...
       Add to Cart  Details 

    Customers Also Purchased:

    • Noid Light IAC Test Lights Ignition Spark Tester Kit
      Noid Light IAC Test Lights Ignition Spark Tester Kit
      Manufacturers Part #: 36330
      Your Price: $43.97
      For diagnosing engine problems stemming from the electrical fuel injection system, IAC or spark plug circuits. Includes: Noid lights for checking GM TBI, PFI, SCPI and Multec 2 versions, as well as Bosch PF I and II models and the Ford TBI.2 IAC test lights for flat 4-pin and square 4-pin connectors.The 23900 In-Line Ignition Spark Checker for troubleshooting the ignition system. This checker also shows a duplicate view of the ignition spark.Kit...
       Add to Cart  Details 
    • Stethoscope Set
      Stethoscope Set
      Manufacturers Part #: 52750
      Your Price: $20.12
      Use the black diaphragm chamber and screw-in metal probe to detect mechanical sounds from bearings, engines, transmissions, etc.For air induced sounds, attach the vinyl hose to the hollow tube and funnel assembly.The funnel amplifier will detect noises from vacuum leaks, exhaust leaks, air leaks and wind noise.For hard to reach locations, remove the funnel and use the hollow tube.Shipping wt. 10 oz. Lisle 52750 Stethoscope Set ...
       Add to Cart  Details 
    • Universal Valve Core Tool
      Universal Valve Core Tool
      Manufacturers Part #: 14100
      Your Price: $15.72
      This tool removes and installs valve cores and valve stem caps.The double ended core driver reverses in the tool body.The reversible driver fits both large and small valve cores.Use the opposite end of the tool to remove and install valve stem caps.The tool handle is long enough to access inside dual wheels.It is constructed of lightweight aluminum with a pocket clip. Lisle 14100 Universal Valve Core Tool ...
       Add to Cart  Details 
    • 117-Pc Deluxe Combo Set - Taps & Dies, HSS Drills, Extractors
      117-Pc Deluxe Combo Set - Taps & Dies, HSS Drills, Extractors
      Manufacturers Part #: 26377
      Your Price: $392.60
      117 Piece deluxe set - combination fractional/metric taps & dies, high speed steel drills & screw extractors. Includes: Assorted machine screw, fractional and metric taps.Assorted 5/8" and 1" hexagon fractional and 5/8" and 1" hexagon metric dies.Drill bit size No. 3 - No. 43, 5/16" - 13/32", Letter B - Letter Z, EX-1 - EX-5, 5/64" -29/64" Also, includes the following threading tools: Adjustable die stock; plain die stock; T-tap wrench, hex nut...
       Add to Cart  Details 
    • Inner Tie Rod Tool
      Inner Tie Rod Tool
      Manufacturers Part #: 45750
      Your Price: $67.32
      Inner Tie Rod Tool Includes an additional 1-1/2" Crows Foot for Chevrolet Colorado and GMC Canyon.Works on tie rods with inaccessible flats.Many inner tie rod end sockets do not have a complex hex on the full length of the socket.The rounded socket ends prevent access to the wrench flats.This tool utilizes six crows feet to engage the wrench flats.Long socket slips over tie rod end and connects to the crows foot.The inner tie rod can be removed ...
       Add to Cart  Details 
    • 6 Inch Digital Stainless Steel Caliper w/ Case
      6 Inch Digital Stainless Steel Caliper w/ Case
      Manufacturers Part #: 5900
      Your Price: $32.56
      0-6" Range (0-150mm) Large easy-to-read LCD display. Comes in a plastic case to store when not in use. Hardened stainless steel. Zeroing feature thumb wheel and lock. Comes with extra battery. Mountain 5900 6 Inch Digital Stainless Steel Caliper with Case ...
       Add to Cart  Details 

    Customers Also Shopped For:

    • Bar Type Puller/Bearing Separator Set 7 Ton
      Bar Type Puller/Bearing Separator Set 7 Ton
      Manufacturers Part #: 4517
      Your Price: $140.04
      Includes a Bearing Splitter with 4" capacity, two sets of hex push puller legs, a 8" bar type puller head mated with a custom thread forcing screw.Now service and maintenance professionals have a Puller/Bearing set for tough jobs, up to 7-tons, larger applications, and greater reach 8" to 16".As a stand alone puller/bearing splitter set or as a compliment to the 4518 version, the 4517 7-Ton Puller/Bearing Separator Set gives your maintenance/ser...
       Add to Cart  Details 
    • Crankshaft Balancer Puller Adapter Set for GM
      Crankshaft Balancer Puller Adapter Set for GM
      Manufacturers Part #: 7911
      Crankshaft Balancer Puller Adapter Set for GM Includes shulder bolts and spacer adapter. Wt., 8 oz. ...
    • Crankshaft Balancer Puller Kit for GM
      Crankshaft Balancer Puller Kit for GM
      Manufacturers Part #: 7912
      Your Price: $103.50
      Everything you need to pull harmonic balancers with three tapped holes.The shoulder bolts are designed to prevent them from being installed too deply, protecting the crank sensor and/or interrupter rings from damage.The spacer adapter gives the puller`s forcing screw something to push against.The kit works on 1990 and newer 3300 and 3800 V-6 engines.Includes No. 518 Flange-type Puller and No. 7911 Adapter Set.The 7911 Adapter Set consists of the...
       Add to Cart  Details 
    • Two-Holer Body & Fender Dent Puller Master Shop Kit
      Two-Holer Body & Fender Dent Puller Master Shop Kit
      Manufacturers Part #: TH12000
      Your Price: $167.12
      The Two-Holer gets its name from the fact that the user makes two holes in the uni-body sheet metal from the front. Insert the Z shaped bar into one hole. Insert the pulling hook, which grasps the bar at the center of its length, into the second hole. pull is then made by hydraulic power in which the user has total command over the sheet metal panel. Although this sounds like a simple tool, a look at the kit shows the care and planning that has g...
       Add to Cart  Details 
    • Master Bolt Grip Kit
      Master Bolt Grip Kit
      Manufacturers Part #: 7793
      Your Price: $135.70
      Master Bolt Grip Kit 7793 Features and Benefits: Multi-Purpose applications such as steering wheels, flywheels, harmonic balancers, pulleys and gears with tapped holes Includes special stepped bolts for 1990 and newer GM 3300-3800 V6 crankshaft pulleys 4-way slotted puller yoke and 2 lengths of hardened 'live-center" forcing screws A set of 3 interchangeable forcing screw tips is included to  optimize pressure and prevent 'walking" Blow mold...
       Add to Cart  Details 
    • GM Steering Wheel Puller Legs
      GM Steering Wheel Puller Legs
      Manufacturers Part #: 7929A
      Your Price: $22.03
      Legs do the work of three separate Kent-Moore tools: J-42120, J-42578, and J-36541-A.GM eliminated the tapped holes in the steering wheel assembly on late model cars and vans, making these puller legs the only way to remove the wheel without damage. They`re used with OTC steering wheel puller No. 7245 or 7403 to get behind the steering wheel assembly to give a straight, even pull. Works on: Pontiac: 1988-93 Lemans; 1997-current Grand Prix, Tran...
       Add to Cart  Details 

    Current Reviews: 0