Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Hand Tools > Pullers > Pullers and Pushers > 3 in 1 Spindle Pull

3 in 1 Spindle Puller

3 in 1 Spindle Puller
85796 is a 3-in-1 puller that makes removing the spindle from four wheel drive vehicles much easier. This puller fits spindle sizes 1-1/2", 1-5/8" and 2" spindles that are O.E. on 4x4 trucks.
CAUTION: Not for use with impact wrenches (air tools).

Specialty Products 85796 3 in 1 Spindle Puller SP85796

  • Shipping Weight: 4lbs
  • Manufactured by: Specialty Products
  • Toolsource #: 116806
  • Manufacturers Part #: 85796
  • Also Known As: SP85796

Special Order
Contact For Details

$71.85

Related Products

  • 17-1/2 Ton Push-Puller 3-1/8 to 11-3/4In. Spread
    17-1/2 Ton Push-Puller 3-1/8 to 11-3/4In. Spread
    Manufacturers Part #: 938
    Your Price: $216.03Includes Free Shipping
    17-1/2 Ton Capacity Push Puller Can be used with Nos. 1124 and 1130 bearing pulling attachments or Nos. 679 and 680 pulley pulling attachments. May also be used with Nos. 1150, 1151, 1153, 1165, or 1166 internal pulling attachments.Reach: 11-1/2".Spread: 3-1/8" to 11-3/4".Screw Size: 1"-14 x 13-1/4".Weight: 20lbs., 12oz.NOTE: leg ends threaded 5/8"-18.Includes: No. 1106 legs and No. 24827 leg ends. ...
  • Front 4WD Spindle Puller Ford D93T-3206-A
    Front 4WD Spindle Puller Ford D93T-3206-A
    Manufacturers Part #: 7502
    Your Price: $56.70
    Used to remove the front spindle to access the inner needle bearing for lubrication & alignment of front wheels.Services full size GM, Ford, Jeep, & International pick ups w/ Dana front axles.Also services Ford Ranger & Bronco II.The 5/8" fine thread makes it ideal for use with OTC slide hammer No. 1155.Fits spindle thread sizes 2"-16, 1 5/8"-16 and 38mm-1.5.Weight: 2 lbs. 8 oz.Same as Ford No. D93T-3206-A. OTC 7502 Front 4WD Spindle Puller ...
  • Handy Pull Kit
    Handy Pull Kit
    Manufacturers Part #: 20222
    Your Price: $32.10
    Handy Pull eye bolts allow you to pull hinges, etc. A hood hinge plate allows you to pull hood and deck lid hinges back into position. Kit Includes: Right Angle Pulling Plate10mm Eye Bolt 8mm Eye Bolt6mm Eye BoltHood Hinge Plate Steck 20222 Handy Pull Kit ...
  • 10 Ton PROTO-EASE(TM) 2-Way Straight Jaw Puller Set
    10 Ton PROTO-EASE(TM) 2-Way Straight Jaw Puller Set
    Manufacturers Part #: 4234B
    Your Price: $306.06Includes Free Shipping
    4234B - 10 Ton PROTO-EASE™ 2-Way Straight Jaw Puller Set Features and Benefits This is a 10 Ton PROTO-EASE™ 2-Way Straight Jaw Puller Set Reach: 2-15/16", 4-11/16" and 7-1/8" (18" with jaws bolted together)-Spread: 10" Includes steel storage Weight 15.37 lbs.   Stanley Proto Industrial Tools PO 4234B - 10 Ton PROTO-EASE™ 2-Way Straight Jaw Puller Set PO423B ...
  • 11056 - Puller Set
    11056 - Puller Set
    Manufacturers Part #: 96711311
    Your Price: $1,301.76Includes Free Shipping
    11056 - Set: Pullers 96711311 consisting of the most common two- and three-armed pullers with two- and three-armed, sliding, parallel extractor hooks. for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles; hooks can be used as internal or external hooks; the efficient leverage effect forces the hooks firmly onto the part to be extracted. technical data code 96711311 EAN code 4018754173174 EClass ...
  • 11055-1 2 Arm Puller
    11055-1 2 Arm Puller
    Manufacturers Part #: 71190011
    Your Price: $288.00Includes Free Shipping
    11055-1 2 Arm Puller 71190011 two-armed , with swivelling extractor hooks and lateral clamp clip, zinc plated; when the clamp clip is tightened, the claws of the extractor hooks locate under the part to be extracted and lever it free as force is applied before extraction begins; for extracting gearwheels, ball bearings, pulleys, drop arms and similar parts from shafts or axles; the clamp clip presses the extractor hooks firmly against the par...

Customers Also Shopped For:


Current Reviews: 0