1/2 DEG FORD CAM/CAS SLEEVE

Features and Benefits:

• 1/2 DEG FORD CAM/CAS SLEEVE



Change camber, caster, or both on twin tractionbeam Dana 44s with these sleeves. Simplyremove the tire, cotter pin and upper ball jointstud nut and break the taper free between thestud and sleeve. Using a sleeve puller, removethe existing sleeve. Install zero degree sleeve23109 to determine the change needed, theninstall the correct sleeve. To split camber andcaster adjustment, rotate sleeve 45°. APPLICATIONS Ford 4WD:1980 - 96 Bronco - Full Size1980 - 96 F1501980 - 98 F250, F350