Puller Adapter 5/8-18 Female To 1-14 Female

Female Threaded Adapter Set

For use on the ends of Push- Puller legs or forcing screws to aid in the removal and installation of shafts, axles, and housings.

Female End A 5/8"-18, Female End B 1" -14

Manufactured by: OTC Tools and Equipment
Toolsource #: 61502
Manufacturers Part #: 8040
Also Known As: OTC-8040, OTC8040

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

Write Review

Customers Also Purchased:

Puller Adapter 5/8-18 Female To 3/4-10 Male

Manufacturers Part #: 8015
Your Price: $13.89
For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc. Female End 5/8"-18, Male End 3/4"-10, Length 2 1/4" OTC 8015 Male-Female Threaded Adapters ...
Add to Cart Details

Customers Also Shopped For:

Fan Clutch Wrench Set - 10-Pc

Manufacturers Part #: 7895
Your Price: $109.09
Allows you to hold the fan clutch with the clutch holder tool, while using the special wrench to turn the fan clutch nut.Square drive allows attachment of a breaker bar for extra torque.A must for any front engine service. Kit includes: 2-1/4" Fan pulley holding tool2-3/8" Fan clutch bolt holding tool2-1/8" Fan clutch pulley holding tool3-1/4" Fan pulley holding tool3" Fan clutch pulley holding2-13/16" Fan hub wrench1-7/16" Fan clutch nut wrench...
Add to Cart Details
Polystinger LED Flashlight w/o Charger (Black)

Manufacturers Part #: 76160
Your Price: $93.73
Unbreakable polycarbonate lens with scratch-resistant coating Light output: high - up to 24,000 candela (peak beam intensity), 185-Lumen; medium - up to 12,000 candela (peak beam intensity), 95-Lumen; low - 6,000 candela (peak beam intensity), 50-Lumen 3-cell, 3.6-Volt sub-C NiCd battery is rechargeable up to 1000 times Access any of the three variable lighting modes and strobe via the head-mounted switch Runtime: high - up to 2 hrs.; medium...
Add to Cart Details
Puller Adapter 1-14 Female To 5/8-18 Male

Manufacturers Part #: 8012
Your Price: $35.30
Male Female Puller Adapter For use on the ends of Push-Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc. Female End 1" - 14, Male End 5/8" - 18, Length 3 3/16" ...
Add to Cart Details
Offset Boxend Tubular Handle Wrench Black 12 Point-2-3/8-65MM

Manufacturers Part #: 1276TOB
Your Price: $116.12
Offset Boxend Tubular Handle Wrench Black 12 Point-2-3/8-65MM 1276TOB Features Unique, versatile design allows wrench to be used with or without optional handles Tubular Wrenches may be used without the handle to quickly run down nuts. The handle can then be attached to provide maximum turning power for final tightening or to reach otherwise inaccessible fasteners. A detent on the wrench shaft helps to align locking button with h...
Add to Cart Details
Puller Adapter 1-8 Female to 5/8-18 Male

Manufacturers Part #: 8020
Your Price: $35.30
For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc. Female End 1"-8, Male End 5/8"-18, Length 3" OTC 8020 Male-Female Threaded Adapters ...
Add to Cart Details
Female Swivel Brass Hose End - 1/4 In ID x 1/4 In NPS

Manufacturers Part #: 609
Your Price: $1.44
Female Swivel Brass Hose End - 1/4 In ID x 1/4 In NPS Ball seat....
Add to Cart Details

Current Reviews: 0

Hand Tools > Pullers > Puller Adaptors and Parts > Puller Adapter 5/8-18 Female To 1-14 Fema

Puller Adapter 5/8-18 Female To 1-14 Female

Customers Also Purchased:

Customers Also Shopped For: