Remote Display Digital Multimeter - Fluke

Fluke 233 Remote Digital Multimeter

The Fluke 233 Remote Digital Multimeter features a detachable wireless display and uses a 2.4 GHz ISM Band wireless transmitter to immediately send measurements to the display. By sliding the wireless display out of the meter body, the user can place the display where it is most easily seen, up to 33' from the point of measurement. When the display is attached, the Fluke 233 operates as a conventional multimeter. The Fluke 233 is safety rated for use in CAT IV 600V/CAT III 1,000V working environments.

Features:

• True-rms ac voltage and current for accurate measurements on non-linear signals
• Measure up to 1000 V ac and dc
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 ° capacitance range
• Frequency to 50 kHz
• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Resistance, continuity and diode test
• Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
• The removable magnetic display can be conveniently mounted where it is easily seen
• Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
• Use as a conventional multimeter when the display is connected
• Radio transmitter automatically turns off when the display is connected to the meter
• Auto power off maximizes battery life
• Min/Max and Average recording to capture variations automatically
• Test continuity and diodes
• Easy to read display with large digits and bright backlight
• Battery life approximately 400 hours