Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Hand Tools > Chisels > Individual > Black Oxide Cold Chisel - 110-3/4 x 18

Black Oxide Cold Chisel - 110-3/4 x 18 In

Black Oxide Cold Chisel - 110-3/4 x 18 In

This chisel is pencil shaped with a sharp blade screwdriver end. When you hit the blunt end with a hammer, it forces the blade end into metal to mark it or even cut through it. It's ideal for cutting, shaping and removing metal softer than the cutting edge of the chisel. These come 3 in a box. Made with the quality and durability to last!

  • Extra long full finish
  • Black oxide coating for corrosion resistance
  • Cuts 3/4"
  • Body size: 5/8"
  • Overall length: 18"
  • Made in the USA
  • Black Oxide Cold Chisel - 110-3/4 x 18 In

    • Shipping Weight: 1.6lbs
    • Manufactured by: Mayhew Tools
    • Toolsource #: 101352
    • Manufacturers Part #: 10215
    • Also Known As: MAY-10215, MAY10215, MH10215, MY10215

    Only 1 left in stock - order soon

    Inventory available from other suppliers, prices may be different


    Customers Also Purchased:

    • Universal Hydraulic Flaring Tool Set
      Universal Hydraulic Flaring Tool Set
      Manufacturers Part #: 72475
      Your Price: $329.06Includes Free Shipping
      This kit fabricates: Push Connect 1/4, 5/16 and 3/8”, GM Fuel Line Flare, Brake Lines and Transmission 5/16 and 3/8”, Flare/Double Flare 3/16, 1/4, 5/16, 3/8 and 1/2”, Metric Bubble Flare 4.75, 6, 8, and 10 mm.  Includes: 71202 Hydra-flare Yoke & Pump Assembly 71097-01 45° Flaring Cone 72485-PB Custom Molded Plastic Box for 72475  Push Connect Adapters Push Connect Die Sets 71204 1/4” Adapter 71214 1/4” Die Set 71205 5/1...
    • 7 Round Pin Trailer Tester
      7 Round Pin Trailer Tester
      Manufacturers Part #: 7865
      Your Price: $34.29
      The 7 round pin trailer tester identifies faulty circuit on trucks and trailers by attaching to the wire terminals.Plugs in line to the trailer to allow the truck to power the trailer while you test each circuit.Also has an emergency bypass feature which allows the user to remove the pin on the faulty circuit and jump power from the 12 volt supply for a temporary fix.Tests Truck side trailering circuits and Trailer Side Trailering circuits.Emerge...
    • Gator Jaws Oil Filter Pliers
      Gator Jaws Oil Filter Pliers
      Manufacturers Part #: 7899
      Your Price: $59.92
      Have you have ever wrestled an oil filter that was over tightened? Then get excited, for now the Gator Jaws Oil Filter Removal tool is here! The Gator Jaws are able to reach around hot exhaust manifolds without burning your arm. It will grab your oil filter with tremendous gripping force using its 32 biting teeth. Even the most difficult oil filters come off with ease. Just a short pull will break loose a stuck oil filter. If you are in the busin...
    • Bearing Locknut Socket 6 Pt 4 1/8 Inch
      Bearing Locknut Socket 6 Pt 4 1/8 Inch
      Manufacturers Part #: 1915
      Your Price: $26.18
      Truck wheel bearing locknut socket has 3/4" square drive opening.Permits the use of an extension & torque wrench to tighten the locknut as required.Locknut removal & installation is simple, even when wide rim wheels are involved.A long extension may be attached to the socket to provide the necessary clearance.Socket is made of high-strength steel.Opening resists "rounding out." OTC Tools 1915 6 Point Bearing Locknut Socket - 4 1/8" ...
    • Fuse Saver Short Circuit Locating System
      Fuse Saver Short Circuit Locating System
      Manufacturers Part #: 8005
      Your Price: $83.01
      The IPA8005 Fuse Saver gives you a level of versatility in electronics testing never before available. It allows you to move about the vehicle while checking for shorts in the electrical system. You can also disconnect and reconnect power to any circuit while work is being completed in that circuit without leaving the work area. Have you ever had a blown fuse and wished you had 30 new fuses so you could keep replacing the blown fuse until you fo...
    • Fractional SAE Stubby Combination Wrench Set 10 Pc
      Fractional SAE Stubby Combination Wrench Set 10 Pc
      Manufacturers Part #: 710
      Your Price: $27.18
      Sizes include: 7/16", 1/2". 9/16', 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", and 1". Extra short wrenches, perfect for tight spaces Drop forged alloy steelFully polished finish. In plastic tray for tool box drawers Lifetime warranty V8 Tool 710 10 Piece Fractional SAE Stubby Wrench Set ...

    Customers Also Shopped For:

    Current Reviews: 0