Metric Open End Wrenches, Individual Sizes
An open end wrench has U-shaped jaws on both ends, usually in two different sizes, so it can slip onto a nut or bolt from the side. This category holds individual metric open end wrenches sold one size pair at a time, from small sizes for instrument and electrical work to large wrenches for equipment, including thin flat wrenches for narrow nuts. Auto repair technicians, import specialists, industrial maintenance crews and equipment mechanics use them to replace a lost wrench or add a size their set does not cover.
When an open end wrench is the right tool
Because the jaws are open, the wrench goes where a socket or box end wrench cannot get over the fastener: on fittings along a line, on jam nuts and lock nuts behind an adjuster, and on bolts with something in the way above them. The heads are usually angled to the handle, so flipping the wrench over gives a new set of positions in tight spaces. Thin flat wrenches fit narrow lock nuts and adjusting nuts where a standard wrench is too thick.
Choosing a size pair
Metric open end wrenches are paired by size, such as 6 x 7 mm or 17 x 19 mm, so one wrench covers two neighboring fastener sizes. Check that both openings match what you need, and that the length gives enough leverage without being too long for the space. Larger pairs, such as 25 x 28 mm, are longer and heavier to match the fasteners they turn.
Using them
An open end wrench grips only two flats, so it is better for quick turning and holding than for breaking a very tight fastener loose. Push the wrench fully onto the fastener and pull rather than push where you can. Use a box end wrench, flare nut wrench or socket for the final tightening when the fastener is soft or very tight.
Brands here include Williams, V8, Martin, NEPROS, VIM and Sunex. Complete metric open end wrench sets are in the Sets category next to this one.














































.jpeg)







Follow us on social media