1/2 In Drive Metric Crowfoot Wrenches
A crowfoot wrench is an open end wrench head with a square drive hole, so it attaches to a ratchet, extension or torque wrench. It reaches nuts on lines, pumps and fittings where a socket cannot slide over the fastener because a tube or hose is in the way. This category holds individual 1/2 in. drive metric crowfoot wrenches sold one size at a time, including jumbo sizes; product names show sizes such as 38mm, 41mm, 42mm and 46mm.
Choosing and using a crowfoot
Buy the exact metric size of the nut, since an open end on a loose fit can spread or round the flats. The 1/2 in. drive suits the larger sizes and the higher torque that large fittings need. Use steady pressure and keep the jaws fully seated on the nut.
Crowfoot wrenches and torque
A crowfoot moves the fastener out ahead of the torque wrench drive, which changes the torque reaching the nut. Mounting the crowfoot at a right angle to the torque wrench handle keeps the effective length the same, so the reading stays as set. In line with the handle, the setting needs to be adjusted for the added length, following the torque wrench maker's method.
Fleet and diesel shops, heavy equipment mechanics and industrial maintenance crews use them on large hydraulic fittings, axle nuts and pump lines.
Brands here include V8 Tools, Proto, Lisle, Mueller-Kueps and Martin. For smaller metric sizes, see 3/8 In Drive Individual and 1/4 In Drive Individual.







































Follow us on social media